Harbor Breeze 35086 User manual
ITEM #0552025
MODEL #35086
CEILING FAN
1
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,
8 a.m. - 5 p.m., EST, Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Français p. 14
PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A
BHanging Bracket 1
Washer 2
Mounting Screw 2
Down Rod 1
Hair Pin 1
Clevis Pin 1
Canopy 1
Canopy Hole Cover 1
Blade Bracket 5
Motor Assembly 1
Fan Blade 5
Blade Washer 15
Blade Screw 15
Blade Balancing Kit 1
Motor Coupling Cover 1
C
D
E
F
G
H
I
J
K
L
M
N
O
Lowes.com/harborbreeze
D
F
CC
R
G
AU
I
X
EE
Y
K
L
T
PZAA BB
J
B
C
E
H
ON
M
Q
S
V
W
DD
PACKAGE CONTENTS
3
SAFETY INFORMATION
PART DESCRIPTION QUANTITY
Glass Mounting Ring 1
Receiver 1
Remote 1
Reverse Switch 1
Set Screw 2
Shoulder Screw 2
Glass Shade 1
50 Watt E11 Bulb 2
Light Assembly Screw 3
Light Assembly 1
Glass Mounting Ring Screw 3
Wire Connector 6
Spring Washer 1
Lag Screw 1
Lag Washer 1
Blade Bracket Screw 10
P
Q
R
S
T
U
V
W
X
Y
Z
AA
BB
CC
DD
EE
Lowes.com/harborbreeze
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING:
• Important: When using an existing outlet box, be sure the box is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury or
death.
• Turn off circuit breakers and wall switch to the fan supply wire leads. Warning: Failure to
disconnect power supply prior to installation may result in serious injury or death.
• Do not install fan on a ceiling with a pitch greater than 20°.
• Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards (ANSI/NFPA 70-1999). If you are unfamiliar with the wiring
codes, contact a qualified electrician.
• Important: Be sure wiring box is properly grounded or that a ground (green) wire is present.
• Make sure the installation site you choose allows a minimum of 7 feet from the floor to the end of
the blades
PREPARATION
4
1. Secure the hanger bracket (A) to the ceiling outlet
box using mounting screws (C) and washers (B)
provided with the outlet box. Important: If attaching
the fan to a sloped ceiling, make sure open end of
mounting bracket is installed facing the roof. Do not
install fan on a ceiling with a pitch greater than 20°.
1
AB
C
Lowes.com/harborbreeze
A B C
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and diagram. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated assembly time: 30 minutes to 1 hour.
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses, silicone caulk, caulking gun.
ASSEMBLY INSTRUCTIONS
• WARNING-To reduce risk of fire, electric shock, or personal injury, mount to outlet box marked
“Acceptable for Fan Support of 15.9kg (35lbs) or less” and use mounting screws provided with the
outlet box and/or support directly from building structure. Most outlet boxes commonly used for
the support of luminaries are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
• Warning-Risk of fire, electric shock, or personal injury. Ceiling fans may be either directly
supported from a structural framing member of a building and (see examples in figures A & B) or
may be mounted to an outlet box marked acceptable for fan support of 31.8 kg (70 lbs) to 15.9kg
(35 lbs) (see example in figure C).
5
ASSEMBLY INSTRUCTIONS
2. Remove the hairpin (E) clip and clevis pin (F) from the downrod support of the motor assembly (J)
and loosen the two set screws (T). Slide the downrod (D) through the canopy (G), canopy hole
cover (H) and motor coupling cover (O). Feed the black, white and blue wires with safety cable
from fan through the downrod (D). Insert the downrod into motor assembly (J) Secure clevis pin
(F) with hairpin (E) clip and tighten setscrews (T).
3. Loosen the two shoulder screws (U) without fully
removing in the hanger bracket (A). Carefully lift the
fan and seat the downrod (D)/hanger ball assembly
on the hanger bracket (A) that was just attached to
the outlet box. Be sure the groove in the ball is lined
up with the tab on the hanger bracket (A).
Lowes.com/harborbreeze
2
DE
J
T
GF
H
O
3
D
A
U
6
ASSEMBLY INSTRUCTIONS
5. The frequency switches on your receiver and
transmitter have been preset at the factory. Remove
the transmitter battery cover and make sure the
switches are set to the same position. This must be
done so that your fan will communicate properly. If
you are using more than one fan in the same area
and want to control them separately, change one
fan’s dip switch settings in the transmitter and
remote to a new pattern.
NOTE: If not using for long periods of time, remove
battery to prevent damage to transmitter. Store the
remote away from excessive heat or humidly.
4. For Canadian installation and for USA fans over 35
lbs, the safety cable must be installed into the house
structure beams using a 3” lag screw (CC). Make
sure that when the safety cable is fully extended the
lead wires are longer than the cable and no stress is
placed on the lead.
Lowes.com/harborbreeze
4
Safety
Cable
Safety
Cable
Safety
Cable
CC
DD
BB
R
5
Q
ASSEMBLY INSTRUCTIONS
7
6. Wiring the fan per wiring diagram and Securely connect wires with wire connectors (AA):
• Connect WHITE fan motor wire to WHITE receiver unit wire marked TO MOTOR N.
• Connect BLUE fan motor wire to BLUE receiver unit wire marked FOR LIGHT.
• Connect BLACK fan motor wire to BLACK receiver unit wire marked TO MOTOR L.
• Connect BLACK supply wire to BLACK receiver unit wire marked AC IN L.
• Connect WHITE supply wire to WHITE receiver unit wire marked AC IN N.
• Connect GROUND (GREEN) wires from hanger bracket and downrod ball, to GROUND (GREEN
or BARE COPPER) from house.
Lowes.com/harborbreeze
6
AA
ASSEMBLY INSTRUCTIONS
8
7. Once wiring step has been completed, slide the
wired remote receiver in between the bracket (A)
and the top of the downrod ball (D) with the flat side
of the receiver facing the ceiling. Turn lead wires
upward and carefully push them into the outlet box,
with the white and green wires to one side of the box
and the black wire toward the other side.
8. Loosen the two shoulder screws (U) without fully removing the hanger bracket (A). Assemble
canopy (G) by rotating keyhole slot in canopy over shoulder screws (U) in hanger bracket (A).
Tighten shoulder screws (U). Securely attach and tighten the canopy hole cover (H) over the
shoulder screws (U) in the hanger bracket (A) utilizing the keyhole slot twist-lock feature.
7
Lowes.com/harborbreeze
8
U
H
G
AD
ASSEMBLY INSTRUCTIONS
9
9. Attach blade brackets (I) to blades (K) with screws
(M) and metal or fiber washers (L). Do not tighten
screws (M) until each screw (M) has been started.
Then, tighten each screw (M) starting with the center
screw.
10.Screw the glass mounting ring (P) onto the motor
assembly (J) with the glass mounting screws (Z).
Lowes.com/harborbreeze
9
L
EE I
K
M
10
P
J
Z
ASSEMBLY INSTRUCTIONS
10
12.Insert 50 watt. E11 bulbs (W) into the sockets found on the light assembly (Y). Screw glass shade
(V) onto the glass mounting ring (P).
Lowes.com/harborbreeze
11.Attach electric wires from motor assembly (J) to the
electrical wires on the light assembly (Y). Attach the
light assembly (Y) to the motor assembly (J) using
the light assembly screws (X).
11
Y
J
X
12
P
Y
W
V
Table of contents
Languages:
Other Harbor Breeze Fan manuals
Harbor Breeze
Harbor Breeze JP18EB3 User manual
Harbor Breeze
Harbor Breeze TOWNSEND LP8018LAZ User manual
Harbor Breeze
Harbor Breeze E-WCK44ABZ5LKS User manual
Harbor Breeze
Harbor Breeze 35063 User manual
Harbor Breeze
Harbor Breeze E-BDB52ABZC5BC4N User manual
Harbor Breeze
Harbor Breeze 872 User manual
Harbor Breeze
Harbor Breeze ARMITAGE CC52WW5C1 User manual
Harbor Breeze
Harbor Breeze BELCARRA CE-JP13BNK6RC User manual
Harbor Breeze
Harbor Breeze ELEVATION LP8006LBN User manual
Harbor Breeze
Harbor Breeze LANDON LAN52SS5L User manual
Harbor Breeze
Harbor Breeze Cape Coast E-YLM52WW5C1 User manual
Harbor Breeze
Harbor Breeze POINT BREAK Instruction sheet
Harbor Breeze
Harbor Breeze Santa Ana LP8294LBN User manual
Harbor Breeze
Harbor Breeze LARALYN LRN32 User manual
Harbor Breeze
Harbor Breeze PACIFIC GROVE 40101 User manual
Harbor Breeze
Harbor Breeze 0883783 User manual
Harbor Breeze
Harbor Breeze KINGSBURY 40190 User manual
Harbor Breeze
Harbor Breeze 872 User manual
Harbor Breeze
Harbor Breeze 41161 User manual
Harbor Breeze
Harbor Breeze LANSING 40198 User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
