HANYOUNG NUX TH510 Series User manual

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Programmable Temperature & Humidity Controller

Notice

This operation manual is protected by copyright and has all rights concerned.

Without prior consent from Hanyoung Nux Co., Ltd., any part of this document will

not be copied, reproduced, modified, or translated into another language.

This operation manual is provided "as is" and may be subject to changes without

prior notice.

Hanyoung Nux Co., Ltd. shall not be responsible for anything not specified in this

user manual including but not limited to implicit warranty of properness of a certain

purpose.

The accompanied programs are protected by copyright.

All product names, which are used in this document and product, are product

names, service marks, trademarks, or registered marks of the owners.

Hanyoung Nux Co., Ltd.

28, Gilpa-ro 71beon-gil, Nam-gu, Incheon, Korea

TEL : (82-32)876-4697

FAX : (82-32)876-4696

E-mail. over[email protected]

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Before starting Installation

Operation Screen block

diagram Function setting Program System setting Specifications

1. Checking of components 2

2. Safety cautions 4

3. Warranty 4

1. Installation site & cautions 5

2. How to install 5

3. Exterior & panel dimensions 8

4. Wiring 10

5. Terminal connection diagram 11

1. Name of section 13

2. Button operation 14

3. How to control numeric input panel 14

4. How to control character input panel 15

5. Name of control 16

1. Screen block diagram 17

1. Operation screen 19

2. Operation setting 28

3. PV graph view 33

4. Time/schedule setting 35

5. Event 36

1. Pattern setting 39

2. Pattern management 42

3. Pattern name setting 44

4. Pattern alarm setting 45

5. Time signal setting 46

6. Pattern graph 47

1. Sensor input setting 49

2. Control/transmission output 52

3. PID setting 55

4. Inner signal 58

5. ON/OFF signal 61

6. System alarm 63

7. DI configuration 64

8. DO configuration 69

9. System 75

1. Input specifications 79

2. Hardware specifications 79

3. Display specifications 81

4. Memory specifications 82

5. Installation environment 82

6. Engineering unit 82

Before starting

Installation

Operation

Screen block diagram

Function setting

Program

System setting

Specifications

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Programmable Temperature & Humidity Controller

Before starting

1. Checking of components

Many thanks for buying the Hanyoung Nux temperature/humidity controller TH510! The

temperature/humidity controller TH510 is designed to control the temperature and humidity

in thermo-hydrostats. It consists of display and control units The display can be attached to

a panel or VESA-mounted and is connected to the control for communication. The control

consists of power, control, and input/output modules and can be fixed on DIN rail or attached

on a panel using screws. The operation manual describes product functions, how to install,

cautions, and how to use. Read and understand this document before starting the product.

Make sure that this operation manual will be delivered to an end user and kept in an

accessible location (This operation manual may be subject to changes for improvement and

functional changes without prior notice).

First of all, check the specifications referring to your order and see if there is any exterior damage or

missing component.

▶ Component

Display(TH510-1) Power module(TM-PWR) Control module(TH510-MAIN)

Input module(TM-DI) Output module(TM-DO) Input/output module(TM-DIO)

Communication

cable(1.5 m) Bracket 4EA

250 Ω resistor

2EA

3P communication

Connector

SD card Operation

manual

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Before starting

Installation

Operation Screen block

diagram Function setting Program System setting Specifications

▶ Suffix code

Model Code Description

TH510- ☐☐☐Programmable temperature/Humidity controller

Display 1Display(5.7" TFT LCD)

NNone

Input/output

18 input points/6 output points(1 module)+Power module

+Control module

28 input points/14 output points(2 modules)+Power module

+Control module

316 input points/16 output points(3 modules)+Power module

+Control module

NNo input/output

Language SKorean, English, and Chinese(Simplified)

TKorean, English, and Chinese(Traditional)

※ This product consists of the display and control(power, control, input, and output modules).

(Up to 32 contact input/output points, respectively)

▶ Components

Product Model Description

Display TH510-1N☐Display(5.7" TFT LCD)

Control module TH510-MAIN Temperature•Humidity control module

Power module TM-PWR Power module

Input module TM-DI Module with 16 input points

Output module TM-DO Module with 8 output points

Input/output module TM-DIO Module with 8 input and 6 output points

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Programmable Temperature & Humidity Controller

3. Warranty

●

We are not liable for any condition other than those specified warranty conditions.

●

If a user or third party is damaged in using this product due to unforeseeable defect or natural

disaster, we are not liable for any loss or indirect damage.

●

The warranty is valid for 1 year from the date of purchase and it is applicable to any failure that

occurs in normal use conditions, as specified in this manual.

●

For any failure found after the warranty period, paid service may be provided according to our

regulations.

●

In any of the following circumstances, the product will be repaired at a cost even during the

warranty period

•Failure attributable to user (e.g. Initialization due to lost password)

•Failure attributable to a natural disaster (e.g. fire, flood, etc.)

•Failure attributable to relocation after installation

•Failure attributable to unauthorized modification or damage

•Failure attributable to unstable power supply

●

If you require A/S, contact your dealer or Hanyoung Nux Co., Ltd..

2. Safety cautions

● The operation manual may be subject to changes for improvement without prior notice.

● To protect and secure the product and system connected, use the product according to the

safety instructions of this manual.

● We are not liable for any damage caused by negligence or not following the instructions.

● To protect and secure the product and system connected, install any separate or external circuit

outside of the product.

● Do not remove, repair, or modify it without prior consent. It may cause electric shock, fire, and

malfunction.

● Avoid any strong impact. It may cause damage or malfunction to the product.

● To disconnect the main power, install a switch or circuit breaker.

If not followed, it may lead to death or serious injury.

If not followed, it might lead to death or serious injury.

If not followed, it may lead to minor injury or damage to assets.

The cautions are categorized into Danger, Warning, and Caution according to seriousness.

Danger

Warning

Caution

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Before starting

Installation Operation Screen block

diagram Function setting Program System setting Specifications

1. Installation site & cautions

2. How to install

● It may cause electric shock so install in on the panel first.

● Avoid following locations.

• Where people might unintentionally contact a terminal

• Where there is strong vibration, impact, or electromagnetic field

• Where it is exposed to a corrosive or inflammable gas

• Where the temperature changes sharply or there is much humid, dust, or salt

• Where it is directly exposed to direct sunlight or the temperature is extreme

• places with combustibles and flammable objects

● The case and front section are made of fire-retardant polycarbonate but do not install the product

directly on a flammable object.

● Keep away any device or wire that may cause noise. Enough preheating is required especially under

0℃. Keep away any heat-radiating device.

● For wiring, disconnect the entire power.

● This product works at 100 - 240 V a.c. / 50 - 60 ㎐ without special setting. Please make sure that

the power is within the rating to avoid any product damage leading to fire or electric shock.

● Do not touch it with wet hand. You may be electrically shocked.

● Follow conventional cautions in order to reduce the risk of fire, electric shock, and injury.

● For grounding, refer to how to install. (Grounding resistance : 100 Ω or less)

● Keep ventilation and the radiating hole free.

● The overvoltage protection degree is Category II(IEC 60664-1) and the usage environment is Pollution

Degree II.

● Do not use sharp objects or excessive force when operating the touch screen

● The external terminals(sensor input, communication, and control output terminals) must be connected

to separate circuits with at least reinforced insulation from dangerous voltage sections.

● To disconnect the main power, install a switch or circuit breaker.

●

Use 2-5mm thick panels.

●

Insert this device from the front of panel.

●

Connect dedicated clamps to the clamping grooves and fix them with bolts.

(Before fully tightening the clamps, position them in place).

Installation

Before installing it, disconnect the power. Do not touch a terminal because it may lead to

electric shock.

Danger

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Programmable Temperature & Humidity Controller

Fig. 1) How to install the panel

▶Display

(1) How to install the panel

(2) How to install VESA mount

DC 5V

COM1

COM2

75.0

4-M4

Connect an M4 X 7L bolt into a VESA hole.

The tightening torque must be 0.5 N·m or less for clamping.

Forcible tightening may lead to deformation or damage.

Caution

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Before starting

Installation Operation Screen block

diagram Function setting Program System setting Specifications

▶Control

1) How to install DIN rail

①

Connect the top hook(A) of bottom of

floor to the DIN rail and press it(B) in

order to install it.

②

Check if it is fixed by pushing

up the mounting bracket.

Ⓑ

Ⓐ

TH510 series module can connect up to 7 units. Any module must be installed vertically.

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

●

How to install module

②

Fix a module on

both ends using

stoppers.

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

ADR

PWR

RY2

RY6

RY1

RY5

RY3

RY7

RY4

RY8

③

①

Push a module aside

in order to connect it to a

connector.

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

Programmable Temperature & Humidity Controller

3. Exterior & panel dimensions

170.0

138.0 +0.5

-0

138.0 +0.5

-0

145.0

8.8 42.3

DC 5V

COM1

COM2

75.0

24.7

35.5

4-M4

▶Display (Unit : ㎜)

2) How to attach panel

① Referring to the hole dimensions on the left, find where to install it.

② Push outside the top and bottom hooks for fixing screws at the bottom of modules.

③ Fix it with an M3 screw.

POWER용 MAIN용

Ø4.2

4.2

113

5.5

Ø4.2

4.2

113

5.5

●

POWER

●

Main, input/output, input, and output

هﺮﮐ ﮓﻧﺎﯿﻧﺎﻫ تﻻﻮﺼﺤﻣ یرﺎﺼﺤﻧا هﺪﻨﯾﺎ ناﻮﯿﺳ ﺖﮐﴍ

021-33989001

www.sivancarno.com

021-33989002

This manual suits for next models

Table of contents

Other HANYOUNG NUX Controllers manuals

HANYOUNG NUX

HANYOUNG NUX TPR-3M User manual

HANYOUNG NUX

HANYOUNG NUX ED6 User manual

HANYOUNG NUX

HANYOUNG NUX TPR-3N User manual

HANYOUNG NUX

HANYOUNG NUX NP100 User manual

HANYOUNG NUX

HANYOUNG NUX TS500 User manual

HANYOUNG NUX

HANYOUNG NUX FS-3A User manual

HANYOUNG NUX

HANYOUNG NUX HY Series User manual

HANYOUNG NUX

HANYOUNG NUX HY Series User manual

HANYOUNG NUX

HANYOUNG NUX HY-1000 User manual

HANYOUNG NUX

HANYOUNG NUX TPR-2N User manual

HANYOUNG NUX

HANYOUNG NUX BR6 User manual

HANYOUNG NUX

HANYOUNG NUX TPR-3SL User manual

HANYOUNG NUX

HANYOUNG NUX TPR-3SL-EP User manual

HANYOUNG NUX

HANYOUNG NUX TPR-2 User manual

HANYOUNG NUX

HANYOUNG NUX NP100 User manual

HANYOUNG NUX

HANYOUNG NUX MC9 Series User manual

HANYOUNG NUX

HANYOUNG NUX TPR-3N User manual

HANYOUNG NUX

HANYOUNG NUX ND4 User manual

HANYOUNG NUX

HANYOUNG NUX TPR-2SL User manual

HANYOUNG NUX

HANYOUNG NUX TPR-3SL User manual

HANYOUNG NUX

HANYOUNG NUX HY Series User manual

HANYOUNG NUX

HANYOUNG NUX TPR-3SL-EP User manual

HANYOUNG NUX

HANYOUNG NUX MT100 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual