Haier HWT12AD1 User manual
HW 10AD1
H T09AD1
H 12AD1
Please read this manual carefully before
operating your washing machine and retain
it for future reference.
TOP LOAD FULL-AUTOMATIC
WASHING MACHINE
USER’S MANUAL
0030517190B
MODEL
T
W
WT
HWT10ADB1
CONTENTS
Product Description
Safety Information
Installation & Adjustment
Before Starting
Operation
Cleaning and Maintenance
Packing list
Specification
Troubleshooting
1
2
2
2
4
4
5
5
6
7
8
8
10
24
7
8
22
23
25
Symbol Description
Warnings
Installing the bottom plate
Balancing the washing machine
Installation of the drain hose
Installation of water inlet hoses
Check the following before washing
Usage of detergent and softener
Loading your laundry
Explanation of the display
Operation and Wash Cycles
10
Safety
2
Product description
Outer tub cover
Top lid
Inner tub
Pulsator
Detergent and
softener tray
Plinth
Lid lock
Adjustable feet (2 pieces)
Top deck
Cabinet
Cold water inlet valve
Fixed
feet (2 pieces)
Control panel
Handle
Hook
Power cord
Back cover
Please understand that shapes of the washing machine and accessories may be
different from the sketch figures in this manual due to product improvements.
Drain hose connector
Drain pump filter cap
Hot water inlet valve
(Not to be removed by
the customer)
NOTE: The number of handles are model dependent. Refer to specification details on
page 25.
Dial
Lint Filter Box
Symbol Description
Warning sign
Forbidden sign
Contents marked with this symbol are related to the safe use of
the product and the personal safety of the user.
Please operate the machine in accordance with the contents of
this manual to avoid harm to the user or damage to the
machine.
Contents marked with
this symbol indicate operations or
actions that should not be undertaken by the user.
Performing of such actions may result in an injury to the user or
damage to machine and void the warranty.
Safety information
Warnings
A separate, earthed power socket is
required for the power supply.
Hold the plug, not the electric cable, when
unplugging the washing machine.
Do not insert or remove the power plug
with wet hands.
The power plug should be accessible after
machine installation.
Ensure the plug is removed and the taps
are turned off in the following cases.
Power failure, cleaning, moving,
installation of the machine and when
not in use.
2
Safety
This appliance is designed to be used in household and similar applications such as:
Staff kitchen areas in shops, offices, and other working environments;
Farmhouses;
By clients in hotels, motels, and other residential type environments;
Bed and breakfast type environments;
Areas for communal use in blocks of flats or launderettes,
Max. capacity 9 kg (HWT09AD1), max. capacity 10 kg (HWT10AD1) ,max. capacity 10 kg
(HWT10ADB1), max. capacity 12 kg(HWT12AD1),water pressure Min. 30kPa,Max. 1MPa.
If the Power cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified people to avoid a hazard.
CAUTION: If this appliance is supplied by a cord extension set or
electrical portable outlet device, the cord extension set, or electrical
portable outlet device must be positioned so that it is not subject
to splashing or ingress of moisture.
Safety information
Forbidden
60
If you are using an extension cord or
an electrical portable outlet device
(not recommended), ensure that it
is positioned so that it does not come
into contact with water or moisture.
Do not install this appliance in a
damp or wet environment. Do not
leave wet laundry on the Control
Panel or spray water directly onto
this appliance as this may cause the
machine to malfunction, or cause an
electrical fault.
Do not wash
waterproof clothing
as this may affect load
balance during
spin cycle(s).
Do not connect to hot
water with temperature
higher than 60°C .
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or
instruction by a person responsible
for their safety.Children should be supervised to
ensure that they do not play with the appliance.
Do not take apart,
repair or alter the
machine by
yourself.
Do not attempt to remove washing or place
hands inside the washing machine while in
operation. Please ensure that children are
supervised around the machine to avoid
harm.
Do not leave hot or heavy items on the lid
or control panel as this may cause
damage to the washer or make the
washer unsafe to operate.
Do not wash laundry
with chemicals or other
volatile materials (such as
petrol, solvents or thinners)
as this may cause
damage to the
machine.
Keep the machine away
from heat sources
such as heater,
stoves or direct sunlight.
3
Failure to do so, may result in electric
shock.
If power cord or other parts of this machine are damaged or broken, please
contact a technician to have it repaired. Do not attempt repairs by yourself as this
may cause personal harm or void
the warranty.
Please install and adjust the machine according to the directions contained in this
manual. It is very important to follow these
directions for the safe operation of the
machine, and to ensure your machine is being operated correctly.
Installation & Adjustment
4
Back
Front
Screw
Bottom plate Carpet
Installing the bottom plate
The purpose of the bottom plate is to sup press noise
from the washing machine during operation.
Steps:
2. Place the plate onto the bottom of the
machine.
3. Use a screwdriver to tighten the screw (in accessory
bag) securing the panel to the bottom of the washer.
4. Once the screw is tight and the panel
is
secure, return
the washer to its standing position.
1. Tilt the machine backwards against a wall (ensure that
the machine is well supported).
The new hose sets supplied by the appliance are to be used and the old
hose sets should not be reused.
NOTE: The washing machine has ventilation openings in the base, the product must not be
placed on a carpeted surface.
Please do not remove the pump filter cap at the bottom
rear of the product in any situation as water remaining
in the product will flow directly out of the product.
In the event of a blockage or a failure to drain, please contact
the customer care centre for assistance.
The pump filter cap is only to be removed by a trained service
technician.
Pump filter cap
Safety information
Installation & Adjustment
Drain hose
5
Drain hose
clamp
Drain hose joint
1. The height of the standpipe or washbasin should be
between 0.8 - 1.2 m.
Bracket
0.8mh
1.2m
1. Remove the cap of the drain hose outlet.
Note: A small amount of water may come out when the cap is removed. This is
normal as there may be some water left in the pump from
when the machine was tested during manufacture.
60mm20mm
Installation on an uneven surface can lead to“out of balance”events, instability in the
machine operation, or even failure to successfully complete a wash cycle.
Please refer to the following steps for adjustment:
1. Confirm whether the machine is level.
2. Lift the lid and ensure that the bowl is central to the top deck opening.
Adjust the two front leveling feet as necessary.
Balancing the washing machine
NOTE:：
Not level level
and the washing machine's rear end should be at
least 60mm away from the wall.
2. First, connect the drain hose to the connection point on
the lower right side of the cabinet, and fasten with drain hose
clamp (provided).
3. Connect the drain hose guide onto the outside of the drain hose
To guide the drain hose over the washbasin or standpipe,
the bracket must be fitted to the drain hose.
2. To avoid siphoning, the drain hose should not
extended that more than 20 mm from the end of
the guide.
Ensure the drain hose is held in place to avoid
leakage or spills.
CAUTION: The drain hose is subject to water pressure in use and may come loose
from the installed connection point. Secure the drain hose against
unintentional loosening.
The washing machine requires at least a 20mm
clearance to a side wall or other adjacent product,
Installation & Adjustment
Connection between the water inlet hose and the
washer
the nut of the water inlet hose
Thread of the water inlet valve
Water absorption cushion
6
fastened and can be pivoted as required.
Check the inlet hose connections
Water inlet
1. Connect the cold hose (blue connector) to the cold tap
and the hot hose (red connector) to the hot tap. You
may have to use pliers to tighten the coupling. Do not
over-tighten as this may cause damage to the valve or
hose fittings.
2. Connect the other end of the hose to the respective hot and cold
inlet valves located at the rear of the washing machine.
3. We recommend you to replace the inlet hoses every 5 years. Hoses should be
checked from time to time and replaced if any wear, damage or leaks are found.
1. Do not take off the water absorption cushion.
Please check if the cushion is dropped or
damaged before each usage. If this happens,
please contact with after-sales department
immediately.
2. Put the nut of the water inlet hose onto
the inlet valve thread.
3. Fasten the nut.
2. After installation, open the tap to check for leakage.
CAUTION:
1. If the water pressure is too high or too low, the appliance may not be able to operate properly.
2. Ensure the water pressure in the water supply system is at least 30 kPa（1 bar）and a maxmum
of 1 Mpa (10bar).
3. If the water pressure exceeds the maxmum value specified, a pressure reducing valve must be
installed between the water outlet and the hose set connection.
4. Modified or damaged water hoses may result in water leakage resulting in property or
appliance damage.
5. Never kink, crush, modify or cut through water hoses.
6. Only use the new water hoses supplied with the appliance or genuine spare hoses.
7. Never re-use water hoses that have been used before.
1. Swing the hose gently to confirm that the hose is securely
3. Do not bend the hose unduly.
at both ends. This is to ensure the connections remain
4. Periodically check the hose connections are firm
watertight over time.
Preparation before washing
1. Connect the water inlet hose.
3. Insert the power plug into the wall power socket.
4. Ensure that the drain hose is installed at the correct height.
5. When the water pressure in the user's
home is too low, it may not be able to
flush detergents and softeners
effectively.
6. Please clean the detergent box when
required to maintain a clean surface.
It is suggested to dilute the detergents
before putting laundry into the inner tub. It is suggested that the
softener be diluted and put into the inner tub directly after the last rinse.
Check the following before washing
Before washing
Clear pockets and
take out loose items
such as coins, sand,
hairpins, etc,
a. Check if the laundry has any special washing instructions.
b. Divide the laundry into colour fast and non-colour fast items.
When washing jeans and
other easily coloured clothes, please soak them with water first. After soaking, put
into the washing machine.
c. Separate items that do not absorb water easily and wash by hand.
d. For heavily soiled items, please first remove loose dirt or select Pre Wash option (if
avalible).
e.
For those items that may attract lint, please turn inside out before washing.
f. Do not put laundry soiled with chemicals or solvents into the washing machine.
Tie any long
straps or strings,
fasten buttons
and close zippers.
The weight of the
laundry
shall not exceed the rated
capacity of your machine.
Loosen the laundry before
placing it evenly in the tub.
Make sure the clothes are
completely placed in the
inner tub.
When the machine is
running, buttons may
cause noise.
To reduce the noise,
turn clothes inside
out or place them in
a laundry bag.
7
0.8m 1.2mH
7. Before washing, we recommend that a " Drum Clean " cycle is run
without any clothing.
2. Open the water faucet.
Usage of detergent:
Applicable only to HWT09AD1
How to use liquid detergent
How to use softener
The rated washing capacity refers to the largest dry
weight of a load that can be washed.
Before washing, please make sure that the water level covers th
e clothes. Adjust the number of
clothes according to the cycle chosen. Refer to page13 for maximum load sizes.
The load should not exceed the height of the metal drum surface.
The thickness, size and type of clothes will influence
the actual capacity.
Do not select higher than water level“Med”for
clothes less than 2.0kg, to avoid splashing of water.
It is recommended that low suds/high efficiency
washing powder or liquid is used.
Operation
Loading your laundry
The usage and dosage of the softener should
follow the manufacturer's instructions.
Before washing, put the softener into the softener
inlet tray. See the above figure. The softener will
Do not leave softener in the softener tray for a
long time before washing as it could become
solidified and may not be dispensed correctly.
How to use powdered detergent
8
Washing powder
Remove the blue liquid tray and place the powder
detergent directly into the detergent cavity.
If you select“Express”program, it is
recommended to use liquid detergent instead of
washing powder to ensure the most effective
Old or poor quality washing powder may causing
caking in detergent dispenser.
Clean the detergent box periodically to ensure that
washing power is evenly distributed and remove
any detergent build up.
Before washing, put the detergent liquid into the
detergent tray situated on the left-hand side of the
drawer, as the above figure shows.
The usage and dosage of the detergent should
follow the manufacturer's instructions.
Liquid detergent tray
Softener inlet
be dispensed during the last rinse cycle.
NOTE:
Before using powder detergent, please remove
"blue" liquid detergent tray which serves only for
wash performance.
liquid detergent.
This manual suits for next models
3
Table of contents
Other Haier Washer manuals
Haier
Haier HVS1000 User manual
Haier
Haier HW-C1270TVE-U User manual
Haier
Haier HW60-12829 User manual
Haier
Haier XPB90-0713S User manual
Haier
Haier WD-8888-19 User manual
Haier
Haier HWM70VA User manual
Haier
Haier B1000VE User manual
Haier
Haier HW80-BP16636 User manual
Haier
Haier HW-C1270 User manual
Haier
Haier XQS70-98 User manual
Haier
Haier HWM45-10B User manual
Haier
Haier HWM80-113S User manual
Haier
Haier HWM33-200E User manual
Haier
Haier HW100-B14636N User manual
Haier
Haier HWM50-10H User manual
Haier
Haier HWM70-1708T User manual
Haier
Haier HL806TX User manual
Haier
Haier XPB90-99VGS User manual
Haier
Haier LMD8124PBCS0 User manual
Haier
Haier HWT60AA User manual
Popular Washer manuals by other brands
Tricity Bendix
Tricity Bendix AW 1000 W Operating & installation instructions
Panasonic
Panasonic NA-F60L5WRB operating instructions
GE
GE WSLP1500 Dimensions and installation information
Electrolux
Electrolux EWF1284EDW Service manual
Bosch
Bosch WAN2829BSN User manual and installation instructions
LG
LG TV2516DV3B owner's manual
