Haier AE122BCAAA Technical manual

Name of Parts ----------------------2-3

Safety Precautions

---------------------4-5

Fan Operation-----------------------------6

Auto, Cooling, Dehumidifying,

Heating Operation---------------------7

Timer On/Off Function---------------8

Sleep Function-----------------------10

Timer On-Off Function --------------9

Maintenance--------------------------12

User's Attentions---------------------11

Installation Instruction----------14-16

Installation Procedure ----------17-26

Please read this manual carefully before

using

AE122BCAAA

0010572805

Operation Points--------------------------1

Troubleshooting----------------------13

Free Combination Multi-split Type

Room Air Conditioner

(H2EM-18H03) Contents

Before Use

Operation Instruction

Maintenace

Installation of Indoor Unit

No.

Please keep this manual for future use

When the ambient humidity is too high, in

COOLING or DEHUMIDIFYING mode,

there may be water dropped in the air outlet.

During Heating operation, after starting

the unit, the indoor fan motor will not

rotate immediately to prevent cold air from

blowing out.

Please wait

Operation points

Operation of air conditioner Anti-cold air blowing out

3-minuteprotectionfunction

If start the unit immediately only after it is

turned off, the compressor will start after 3

minutes have elapsed to protect the compressor.

Defrosting function

During Heating operation, when frost formed

on the heat exchanger of outdoor unit, the

air conditioner will de frost

automatically for several

minutes. During defrosting,

both the fan of indoor and

outdoor unit do not run. After

finishing defrosting, the air

conditioner will automatically

resume operation.

Change of fan speed

InCOOLINGmode,theairsendingissetatAUTO,whenthe

indoortemperatureisnearthesettemperature,thefanspeed

willlowerautomatically.InHEATINGmode,whenroom

temperaturereachesthesettemperature,thecompressorwill

stoprunning,andthefanwillchangetoLOWFANorstop.

InDEHUMIDIFYINGmode,thefanspeedwillchange

automatically.

Hint

When the air conditioner is in Heating mode,

it absorbs heat from outside and release to

indoors. So the outdoor temperature may

affect the Heating effect.

Power failure resume function (please set and use this function according to actual condition)

After setting power failure resume function, if there is a sudden power failure during unit

operation, when power on for again, the unit will resume the previous state.

Setting method: when the wire controller is in ON state (except for TIMER and FAN mode),

press the SLEEP button for 10 times in 5 seconds, after the buzzer sounds 4 times, the unit will

change to POWER FAILURE RESUME function.

Cancellation method: press the SLEEP button 10 times in 5 seconds, after the buzzer 2 times, the

POWER FAILURE RESUME function is cancelled.

Note: After the unit is set POWER FAILURE RESUME function, if there is a sudden power

failure in using, during this period of time if there is no need to use the unit for a long time,

please cut off power to prevent the air conditioner from automatically resuming to the

previous setting if power failure resumes, or press the ON/OFF button to turn off the unit

after power failure resumes.

ModeFan Speed Swing

Temperature

Clock

Timer

Set

Sleep

Aux. Heat Fileter Reset

AUTO

Reset

ON/OFF

Name of Parts Indoor unit

Drain pan

Wire controller

Electric box

Fan

Motor

Evaporator

Air outlet grille

OFF

Safety Precautions

Before starting the unit, please read the following ìSafety Precautionsî carefully to guarantee the normal

operation of the system.

The following lists two kinds of safety precautions ìWarningî and ìNoticeî. For the items that the improper

use may cause death or serious injury are listed in ìWarningî volume. However, sometimes the items listed

in ìNoticeî volume may also cause serious accidents. So, these two volumes are the important contents

related to safety, they must be observed.

Do not do like this Do follow the

instruction Do equip with

grounding wire

Aftercarefullyreading thismanual,please keepinhand forreference.If theairconditionerisgiventoanewuser,

thismanualshould beattachedwith unittothe newuser.

Installation Safety Precautions Warning

The system should be applied to

places as office, restaurant,

residence and the like.

Application to inferior environment

such as workshop, it may cause

equipment malfunction and serious

injury or death.

The system should be installed by your

dealer or a professional installer.

Installation by yourself is not encouraged.

Because improper installation could cause

water leakage, electric shock and fire

accident.

Notice

Acreepagebreakermustbe

installedattheinstallation place

Unless the circuit breaker is

installed, it may cause

electric shock.

Drainpipeshouldbearranged

properlytoprovidea smooth

drainage.

Ifthepipeisarranged improperly,

furnitureorthelikemay be

damagedbytheleakedwater.

Makesurethesystemisgrounded.

Groundingwireshouldneverbe

connectedtogaspipe,citywater

pipe,lightningconductorrodor

thetelephoneline.Ifthegrounding

wireisnotsetproperly, it may cause

Operation safety precautions Warning

Notice

Do not let the cold wind blow to

human body for a long time.

It may affect the physical condition

or cause some health problems.

When any abnormal condition (scorching

smell or others) is found, stop operation

immediately and turn off the power switch.

Then consult your dealer.

If continuing the operation without removing the

cause, it may cause trouble, electric shock or fire.

Donothandleswitcheswith a wethand.

It may cause electric shock.

Do not use water to clean the air conditioner.

It may cause electric shock.

OFF

Safety Precautions

Notice

Thesystemshouldneverbeusedfor

anyotherpurposesthanintendedsuch

asfor preservationoffood, floraand

fauna, precision devices or work of

art.

Itmaycausedeteriorationofthearticles.

Donotputoruseanyspray

neartheairconditioner,and

do not directly spray to the

airconditioner.

Otherwise it may cause

fire.

Donot putthefiredevicesin

theplaces,whichtheairfrom

theairconditionercandirectly

blow.

Itmaycause the firedevices

cannotburncompletely.

Do not install the system where the air

outlet may directly reach the flora and fauna.

It will not be good for their health.

Only use the proper specified fuse.

If use metal wire

or copper wire to replace the fuse, it

may cause trouble and fire accident.

Do not use the power

switch to turn of or off the

airconditioner.

It may cause fire

or Creepage.

When operating the system

simultaneously with a combustion

apparatus,indoorairmustbeventilated

frequently.

Insufficientventilationmaycause

the dangeroflack ofoxygen.

Whencleaning,please

stoptheunitandcutoff

thepowerfirst.

Do not perform

cleaning, when the

indoor fan motor is

rotating in high speed.

Do not use such equipment as

awater heater, etc., around the

indoor unit or the

wire controller.

If the system is operated at the vicinity of such

equipment that generates steam, condensed water may

drip during cooling operation or it may cause Creepage

or short-circuit.

Do not put the water

containers, such

as vase, on

the unit.

Ifthewater entersinto the unit

and damages the electric

insulation material,it may

cause electric shock.

Safetyprecautions whenmoving, reinstallingand repairingthe airconditioner

Warning

Do not refit the air conditioner. When repair

is needed, please contact your dealer.

Improper repair may cause water leakage,

electric shock and fire accident.

Whenmovingtheairconditionertoanother

installation place,pleasecontact thedealer

orthe professionalinstaller.

Improper moving and reinstallation may

cause water leakage, electric shock and

fire accident.

ON/OFF

Mode Fan Speed Swing

Temperature

Clock

Timer

Set

Sleep

Aux.HeatFileter Reset

Reset

Operation instruction Fanoperation

Turn on the unit

Press the ON/OFF button to turn on the

unit The LCD display of the wire

controller will show the previous

working state (except for Timer, Sleep,

Swing mode), the operation indicator

light on the wire controller will light up.

Choose of working mode

Press MODE button, each press the working

mode will change as the following sequence:

AUTO COOLING DEHUMIDIFYING

HEATING FAN,

Choose FAN operation.

Adjusting FAN SPEED

Press the FAN SPEED button to change fan

speed:

Choose the desired fan speed

Turn off the unit

PresstheON/OFF button toturnoff theunit.

Thewirecontroller only showstheclock and

roomtemperature.

LOWFAN MEDFAN HIGHFAN

AUTO COOLING DEHUMIDIFYING HEATING FAN

About FAN operation

FAN operation refers the air conditioner does not perform COOLING and HEATING

operation, but FAN operation. In this mode, the air conditioner cannot perform

AUOT FAN operation, and does show the temperature value on the wire controller.

LOW FAN MED FAN HIGH FAN

then choose AUTO, COOLING, DEHUMID

IFYING, HEATING operation.

OFFON OFFON

AM PM AM PM

Operationinstruction TimerOn/Offfunction

Beforeusing TIMERfunction,calibrate theclockfirst (referringto page3).When youwakeup in

themorning,beforegoingbacktohomeafterworkoraftergoingtobed,youcanletyourairconditioner

automaticallyturnonorturnoff. 1. Turn on the unit

Afterturningontheunit,setthedesiredworkingmode.

TheLCDofthewirecontrollerwillshowworkingmode.

(exceptforTimer,Sleep,Swing)

2. Set of TIMER mode

PresstheTIMERbuttontochangetheTIMERmode,

eachpresstheTIMERmodewillchangeasthefollowing

sequence:

Then choose the timer mode as you need

(TIMER ON or TIMER OFF.)

At this time the ON or OFF will flash.

3. Settime

Pressthetime adjustingbutton

Each press, the set time increases 10 minutes. If depress the button, the time will increase

rapidly.

Eachpress,thesettimedecreases10minutes.Ifdepressthebutton,thetimewilldecreaserapidly.

ThisLCDwillshowthetimeset, thetimecanbeadjustedwithin24h.

(AMstandsformorning,PMstands forafternoon).

4. Confirm the time

After calibration of the clock, press SET button to confirm time.

At this time, the ON or OFF will not flash.

The time displayed is: at x oíclock x minutes the unit will be turned on

(TIMER ON) or turned off (TIMER OFF).

Cancel TIMER

Press the TIMER button several times until the TIMER mode display

disappears.

Hints:.

After power failure, the clock should be calibrated again.

The wire controller has memory function, when you use this function

for the second time, if the time set is the same as the previous one, you

just need to choose the TIMER mode then press the SET button to confirm.

Timer On Timer Off Timer On-Off

Blank

ON/OFF

Mode Fan Speed Swing

Temperature

Clock

Timer

Set

Sleep

Aux.Heat Fileter Reset

Reset

** ** **

** ****

**/**

OFFON OFFON

AM PM AM PM

Operationinstruction TimerOn-Offfunction

After turning on the unit,

set the proper working mode

The LCD of the wire controller

will show working mode.

(except for Timer, Sleep, Swing)

SetofTIMERmode

PresstheTIMER button to changetheTIMER

mode,each press the TIMERmodewill change

asthe following sequence:

Then choose the TIMER ON-OFF mode.

At this time the ON will flash.

Set the TIMER ON time

Press the time adjusting button

Each press, the set time increases 10 minutes. If depress the button,

the time will increase rapidly.

Each press, the set time decreases 10 minutes. If depress the button,

the time will decrease rapidly.

The LCD shows the time set.

It can be adjusted arbitrarily in 24 hours. (AM refers to morning,

4. Confirm the time

After adjusting time, press SET button to confirm time.

At this time, the ON will not flash, OFF begins to flash.

The time displayed is: at x oíclock x minutes the unit will be turned

Set the TIMER OFF time

Press the TIME button, the adjustment method is the same as

the one of setting TIMER ON time.

Confirm the time of TIMER OFF

After adjusting time, press SET button to confirm time.

At this time, the OFF will not flash.

The time displayed is: at x oíclock x minutes the unit

will be turned off.

Cancel TIMER

Press the TIMER button several times until the TIMER mode display disappears.

According to the sequence of TIMER ON & TIMER OFF setting, you can realize

turning on unit first, then turning off unit.

This manual suits for next models

Table of contents

Other Haier Air Conditioner manuals

Haier

Haier HSU-18HEK03-R2 User manual

Haier

Haier HWF05XCJ User guide

Haier

Haier HW-07LN03 User manual

Haier

Haier HSU-12LEA13-M User manual

Haier

Haier SUPER MATCH AS50S2SF1FA-BC User manual

Haier

Haier AS09GB2HRA User manual

Haier

Haier HSU-12CR03-Y User manual

Haier

Haier HWR12XC8 Instruction Manual

Haier

Haier HSU-30HEA03(T3) User manual

Haier

Haier HSU-07HRA03 User manual

Haier

Haier HTWR10XCK Assembly instructions

Haier

Haier ESA3247 User manual

Haier

Haier HSM0912HRA03/R2 User manual

Haier

Haier HSU18XH7-G - Ductless Split Indoor Wall Mount Unit Heat... User manual

Haier

Haier AC142XCERA User manual

Haier

Haier Commercial Cool CPRD12XC7 User manual

Haier

Haier 1U68REMFRA User manual

Haier

Haier ESA3109 Instruction Manual

Haier

Haier HSU24VCK User manual

Haier

Haier HSU09XH7 User manual

Haier

Haier AC-8888-20 User manual

Haier

Haier HWR05XCM User manual

Haier

Haier HSU-07HR03 User manual

Haier

Haier HWR06XC5-T User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual