Goldstar R1402 User manual

websitehttp:Ywww,lgservice.com

e-mail http:Ywww.lgeservice.com/techsup.html

E'S UITI

Please, read the operating instructions and safety precautions

carefully and thoroughly before installing and operating your

room air conditioner.

MANUEL 'UTILIS

CLI TISE E F

Veuillez life a_entivement et en entier ce guide d'utilisation

et les mesures de securite ci-incluses avant de proceder

I'installation et au fonctionnement de votre clirnatiseur.

I N

ET E

ILIC!ONA

Por favor lea las instrucciones de operacion y las precauciones

de seguridad cuidadosa y totalmente antes de instalar y operar

su acondicionador de aire de ventana.

MODELS, MOIDELES, MODELO::

R1402, R1802, R2102, R240,2, R1803, R2103, R2403

FOR YOUR RECORDS

Staple your receipt to this page in case you ne_ it later.

Write down the.model and serial numbers here:

Model #

You can find them on a label on the side of each unit.

_aler's Name

DatePurchased

READ THIS MANUAL

Inside you will find many helpful hints on how to use and

maintain your air conditioner properly. Just a little preventive

care on your part can save you a great deal of time and

money over the life of your air conditioner.

You'll find many answers to common problems inthe chart

of troubleshooting tips If you review our chart of

Troubleshooting Tips first, you may not need to call for

service at all.

• Contact the authorized Service technician for repair or

maintenance of this unit.

• The air conditioner is not intended for use by young

children or infirm persons without supervision.

• "Youngchildren should be supewised to ensure that they

do not play with the air conditioner.

fety Pre utions

To prevent injury to the user or other p_pie and property damage, the following instructions must be

follow_.

m Incorrect operation due to ignoring of instruction will cause harm or damage+ The seriousness isclassified

by the following indications.

Z_ WARNING "This symbol indicates the possibility of death or serious injury, /

Z_ CAUTION .This symbol indicates the 13ossibiNty of injury or damage to

"properties only.

II Meanings of symbols used in this manual are as shown below.

_Be sure to follow the instruction.

r _ WARNING 1

fL J

• Otherwise, it will cause electric

shock or fire due to heat

generation.

• it will cause electric shock or fire

due to heat generation. • It willau_ electrics_ck or fire.

•Ifthepowercordis da_ged, it must

replacedbythemanufacturer

an authorizedservicecenteror a

similarlyqualifiedpersoninorderto

avoida hazard,

• It will cause electric shock or fire .Itwill cause electric shock.

due to heat generation. • This could damage your health,

, It may cause an injury,

Ic ,o.1

• Water may enter the unit and , An oxygen shortage may occur.

degrade t6e insulation. It may

cause an e]ectr[,c shock.

,Since the fan rotates at high

speed during operation, it may

cause an iniury,

.This couldinjure the pets or

plants.

. Do not use this air _ndifloner to

Feserve precision devices, food,

_ts, plants, and art objects,

It may cause deteriorat_on of

quality, etc.

• it may cause an electric shock. . It may cause a fire or deformation , It may cause imperfect

of the c_inet, combustion.

About the ntrols on the Air Conditioner

The controls will look like one,of the following.

Thermostat

Off

M_ _n

Low _n

High COol

M_ Cool

LowCool

- Turns air conditioner off.

oMed speed fan operation without cooling.

oLow speed fan operation without cooiing.

oC_ling with high speed fan operation..

- C_ling with reed speed fan operation

- C_ling with low speed fan operation.

This automatically controls the temperature of the indoor air.

Turn the knob so that arrow points to the larger marks for greater

cooling. Point the arrow to the simaller marks for more moderate

cooling.

(i.e. the higher number the greater _oling)

•FOR NORMAL COOLING

1. Turn the Operation Knob to the High Cool from the

Low Cool setting.

2. Set the Thermostat control to the desired

temperature mark i (the mid-point is a good

starting position). If the room temperature is not

satisfactory after a reasonable time, adjust the

control to a cooler or warmer setting, as

appropriate.

•Auto Swing

On : Air swing is operated while Operation knob

is set to the _1 position.

Off : Stops the operation of air swing

•FOR MAXIMUM COOLING

1. Turn the Operation Knob to the High C_I setting

2. Set the Thermostat control to the largest ,_,

temperature mark.

•FOR QUIETER OPERATION

1. Turn the Operation Knob to the Low Cool setting.

2. Set the Thermostat _ntrol as needed.

When the air conditioner has been performed

its cooling operation and is turned off or set

to the fan position, wait at least 3 minutes

before resetting to the cooling operation

again_

Additional controls and important information.

The ventilation lever must be in the CLOSE _sition in order to maintain the best cooling _nditions.

When fresh air is necessary in the room, set the ventilation lever to the OPEN position.

The damper is opened and room air isdrawn out.

NOTE: Before using the ventilation feature,

poslti,onthe lever, as shown. First, pull down

part (&}to horizontal line with part _).

Air Direction

The dir_tion of air can be controlled wherever you want to

cool by adjusting the horizontal louver and the verticai

louver.,

• HORIZONTAL AIR-DIRECTION CONTROL

To control horizontal direction of air flow, set to the ON

position the air-swing switch and the air flow will be swept

horizontally by the automatic air-swing system.

if you want to stop the air flow from moving, switch off the

air swing switch at the desired position of the vane.

. VERTICAL AIR-DIRECTION CONTROL

The vertical air direction is adjusted by moving the

horizontal louver.

How to Attach Drain Pan

The air _nditioner employs a proper drain method whereby the condensed water (moisture removed from

the air) is drained to the outside.

Invery humid weather, (and for reverse cycle mo_ls in the rever_ mode) excessive condensate water

removed from the air may cause some w_er to collect. To remove this excess water you can instaii the

drain p_ as detail_ below.

1.Take the drain pan which is located in the air di_haJge.

2. Remove the hole rubber from the base-pan (for some models).

3. Installthe drain pan to the fight _mer of the cabinet with 4 (or 2)

screws.

4. Connect the drain hose of 3/5"insi_ diameter to the outlet located

at the _ttom of the drain p_.You _n purcha_ the drain hose or

tubing locallyto saSsfy your particular needs. (Drain hose is not

supplied).

CABINET

PAN

DRAIN HOSE

Howto Connecta DrainHose

A drain hole iisprovided at the rear of the air _ndit:ioner unit. i] I Fig. 1

Select a drain method according to the foilowing ( J DRAIN PiPE

1. Remove the hole rubber from the base-pan. (for some models) ,.......................... :

2. asC°nnectadrainshownin Fig. h°se °f°/1_1. inside diameter to thedrain,, pipe __!_

3. Or connect a pipe elbow of 9/_, insidediameter to the drain

pipe, then connect a drain hose of 9/1o'inside diameter to the

pipe elbow as shown in Fig. 2. Lr---_ '&_R_I_ _0_

and Maintenance

TURN THE AiR CONDITIONER OFF AND REMOVE THE PLUG FROM THE POWER OUTLET

Air Filter Cleaning

The air filter should be checked at least twice a month to see if cleaning is necessary.

Trapped particles in the filter will build up and block the airflow. This reduces the cooling

capacity and also causes an accumulation of frost on the cooling coils.

1. Open the inlet grille upward by puffing out the bosom of the inlet grille.(a)

in another case, you can open the inlet grille downward by pulling out the top of the inlet

grille.(b)

2. Remove the air filter from the front gdlle assembly by puffing the air filter up or down

slightly.

3. Wash the filter using lukewarm water below 40 _C (104 '_).(c)

4. Gently shake the excess water from the filter completely. Replace the filter.

NOTE: Mark A of inlet grille means, opening direction.

How to Attach Front Grille to Cabinet

(b) (c)

1. Pull down front grille from the cabinet

top

2. Push front griIWs tips toward the cabinet

in order to insert front grille's tabs into

the cabinet

3. Open the inlet grille.

4. Tighten the screw through the front grille

into the plate of the evaporator,

5 Close inlet grille,

Features and In allation

Learning parts name prior to installation will he!p you understand the installation procedure.

1. CABINET

2. HORIZONTAL AIR DEFLECTOR

(VERTICAL LOUVER)

3. VERTICAL A_R DEFLECTOR

(HORIZONTAL LOUVER)

4, AIR D_SCHARGE

5, FRONT GRILLE

6, INLET GRILLE (AIR INTAKE)

7. AIR FILTER

8. CONTROL BOARD

9. POWER CORD

10. EVAPORATOR

11. CONDENSER

12. COMPRESSOR

13, BASE PAN

14. BRACE

15. COVER CONTROL

How to Install the Unit

_ ¸¸.¸4

._:._ ......

1/4 Bubble

INSIDE OUTSIDE FENCE

AWNING

FOAM ...........

COOLE_I HEAT

RADIATION

About 1/2"

Over 20"

1. To avoid vibration and noise, make sure the unit:is installed securely and firmly.

2. Install the unit where the sunlight does not shine directly on the unit.

if the unit receives direct sunlight, build an awning to shade the cabinet.

3. There should be no obstacle, like a fence, within 20" which might restrict heat radiation from the

_ndenser.

4. To prevent reducing performance, install the unit so that louvers of the cabinet are not blocked.

5. Install the unit a little obliquely outward not to,avoid leaking the condensed water into the room

(about 1/2" or 1/4 bubble with level).

6. install the unit with its bottom portion 30~60" above the floor level.

7. Stuff the foam between the top of the unit and the wa!l to prevent air and insects from getting into

the room.

8. The power cord must be connected to an independent circuit. The green wire must be grounded.

9. Connect the drain tube to the base pan hole in the rear side if you need to drain (_nsult a dealer.)

Plastic hose or equivalent may be connected to the drain tube.

How to Use the Reversible Inlet Grille

The grille is designed to clean the filter _th upward and downward.

(a}

A. Before attaching

w(b)

the front grille to the cabinet, if you want to,puff out the

1. Open the inlet grille slightly (a).

2. Turn inside out the front grille (a).

3. Disassemble the inlet grille from the front grille with separating the hinged part by inserting a

straight type _rew-driver tip (b).

4. Then, rotate the inlet grille 180 degrees and insert the hooks into bottom holes of the front grille.

5. Insert the filter and attach the front grille to the cabinet.(Refer to page 7)

B. If you want to pull out the filter downward;

The grille is already designed that way,

WindowRequirements

NOTE: Al! supporting parts should be secured to firm wood, masonry, or metal.

WINDOW REQUIREMENTS

1. This unit is designed for installation in

standard double hung windows with actual

opening widths from 26" to 41".

The top and botom window sashes must

open sufficiently to allow a clear vertical

opening of 18" from the bottom of the upper

sash to the window stool.

2. The stool offset (height between the stool

and sil0 must be less than 1 '/4".

h26" to

8" min Stool

InstallationKits Contents

Type A (14} Ty_ B (7) Type C (5) Type D (2) Carriage Bol (2) Lock Nut (4)

This manual suits for next models

Table of contents

Other Goldstar Air Conditioner manuals

Goldstar

Goldstar R1801H User manual

Goldstar

Goldstar WG5005 User manual

Goldstar

Goldstar GWHD6500R User manual

Goldstar

Goldstar WG1800R User manual

Goldstar

Goldstar R8000 User manual

Goldstar

Goldstar WG1805R User manual

Goldstar

Goldstar KG6000R User manual

Goldstar

Goldstar GWHD6500R User manual

Goldstar

Goldstar GWHD6500R User manual

Goldstar

Goldstar BG8000ER User manual

Goldstar

Goldstar BG8000ER User manual

Goldstar

Goldstar GWHD6507R User manual

Goldstar

Goldstar WG8000R User manual

Goldstar

Goldstar R7003 User manual

Goldstar

Goldstar R5050 User manual

Goldstar

Goldstar R1804H User manual

Goldstar

Goldstar M1804R User manual

Goldstar

Goldstar R1203 User manual

Goldstar

Goldstar GP120CE Instruction Manual

Goldstar

Goldstar WG8005R User manual

Goldstar

Goldstar LW-C1230XL User manual

Goldstar

Goldstar WG5005 User manual

Goldstar

Goldstar R5050 User manual

Goldstar

Goldstar LWC061JGMK1 User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual