GB2
For Your Safety
For Your Safety
Safety Instructions
1. POWER SUPPLY
• Operate this product only from the type of power supply
shown on the marking label. If you do not know the
type of power supplied to your home, contact your local
power company.
• Disconnect the power supply before you start any
maintenance or installation procedures.
2. OVERLOADING
• Make sure that the wall outlet, extension cord and
adapter have a sufficient power rating for the appliance.
If not, this can cause an electric shock or fire.
3. LIQUID
• Do not expose this product to liquids. Do not put
objects filled with liquid on the product.
4. CLEANING
• Disconnect the product from the wall outlet before you
clean it.
• Use a moist cloth to clean the product. Do not use
solvents. Wipe the surface gently with a soft cloth as it
may get scratched.
5. VENTILATION
• Make sure that the slots on top of the product are not
blocked. It is necessary to have a sufficient airflow into
the unit.
• Do not put electronic equipment on the product.
• Do not put objects on the product. This will block the
ventilation or cause damage to the surface.
• Maintain a minimum distance of 10cm around the
product for sufficient ventilation.
6. ATTACHMENTS
• Do not use any unsupported attachments as these may
be hazardous or cause damage to the product.
7. LIGHTNING, STORM OR NOT IN USE
• Unplug the product from the wall outlet and disconnect
the antenna during a thunderstorm or when left
unattended and unused for long periods of time. This
will prevent damage to the unit due to lightning and
power-surges.
8. EXTRANEOUS OBJECTS
• Do not insert anything through the openings in the
unit, where they can touch dangerous voltage points or
damage parts.
9. REPLACEMENT OF PARTS
• When replacement of parts is required, be sure the
service technician uses replacement parts specified
by the manufacturer or those that have the same
characteristics as the original part. Unauthorised
substitution may result in additional damage to the unit.
10. CONNECTION TO THE SATELLITE DISH
• Disconnect the power supply before you connect or
disconnect the cable from the satellite dish/cable TV
signal/aerial. If not, this can cause damage to the LNB/
cable TV line/aerial.
11. CONNECTION TO THE TV
• Disconnect the power supply before you connect or
disconnect the cable from the TV. If not, this can cause
damage to the TV.
12. EARTHING (satellite only)
• Earth the LNB cable to the system earth for the satellite
dish.
13. LOCATION
• Place the product indoors to avoid exposure to
lightning, rain or sun. Do not place it near a radiator or
heat register.
• Keep at least 10 cm clearance from any other appliances
susceptible to electromagnetic influences such as a TV
or a VCR.
• If you place the product on a rack or a bookcase, make
sure that there is adequate ventilation and that you have
followed the manufacturer’s instructions for mounting.
• Do not place the product on an unstable surface where
it can fall. A falling product can cause serious injury to a
personnel and serious damage to the appliance.
14. ENVIRONMENT
• Attention should be drawn to the environmental aspects
of battery disposal.
• Care is required for the use of this apparatus in tropical
and/or moderate climates.
Cautions and Warnings
1. To avoid damage of the power adaptor
• Do not modify or process the power cord or plug
arbitrarily.
• Do not bend or twist the power cord.
• Make sure to disconnect the power cord while you hold
the plug.
• Keep heating appliances as far as possible from the
power cord to prevent the cover vinyl from melting.
• The mains plug, as a disconnection device, shall remain
readily accessible by the user.
• All-pole main switch shall remain readily operable. (For
products with power switch)
2. To avoid electrical shock
• Do not open the main body.
• Do not insert metal or inflammable objects inside the
product.
• Do not touch the power plug with wet hands.
• Disconnect the power cord in case of lightning.
• Unplug the power cable before you install the antenna
cable.
3. To avoid damage of product
• Do not use the product when it is out of order. If you
continue to use the product when defective, this
may cause serious damage. Make sure to contact the
customer service centre if the product is out of order.
• Do not insert metal or alien substance into the slots for
the modules or Smartcards. It may cause damage to the
product and reduce its life span.
• Do not overly pile objects on the product. It may cause
cracks, deformation and discoloration.
