Gestetner 5499 User manual
Operating Instructions
For safety, please read this manual carefully before you use this product and keep it
handy for future reference.
Note to users in the United States of America
Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television re-
ception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio /TV technician for help.
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note to users in Canada
Note:
This Class B digital apparatus complies with Canadian ICES-003.
Remarque concernant les utilisateurs au Canada
Avertissement:
Cet appareil numérique de la classe B est conforme àla norme NMB-003 du Canada.
In accordance with IEC 60417, this machine uses the following symbols for the main switch:
a
aa
ameans POWER ON.
b
bb
bmeans POWER OFF.
Introduction
This manual describes detailed instructions on the operation and notes about the use of this machine.
To get maximum versatility from this machine all operators are requested to read this manual carefully
and follow the instructions. Please keep this manual in a handy place near the machine.
Notes:
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good print quality, Standard recommends that you use genuine Standard masters and inks.
Standard shall not be responsible for any damage or expense that might result from the use of parts
other than genuine Standard parts in your Standard office product.
Power Source
120V, 60Hz, 2.4A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
⇒p.200 “Power Connection”.
i
Safety Information
When using this machine, the following safety precautions should always be fol-
lowed.
Safety During Operation
In this manual, the following important symbols are used:
RWARNING:
R
WARNING:
Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.
R
CAUTION:
Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.
•Connect the power cord directly into a wall outlet and never use an ex-
tension cord.
•Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.
•To avoid hazardous electric shock, do not remove any covers or
screws other than those specified in this manual.
•Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following occurs:
•You spill something into the machine.
•You suspect that your machine needs service or repair.
•The external housing of your machine has been damaged.
ii
RCAUTION:
•Protect the machine from dampness or wet weather, such as rain, snow.
•Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will not
be damaged under the machine.
•When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
•Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.
•For environmental reasons, do not dispose of the machine or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer.
•Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.
•Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies avail-
able at an authorized dealer.
iii
How to Read This Manual
Symbols
In this manual, the following symbols are used:
R
WARNING:
This symbol indicates a potentially hazardous situation that might result in
death or serious injury when you misuse the machine without following the in-
structions under this symbol. Be sure to read the instructions, all of which are de-
scribed in the Safety Information section.
R
CAUTION:
This symbol indicates a potentially hazardous situation that might result in mi-
nor or moderate injury or property damage that does not involve personal injury
when you misuse the machine without following the instructions under this
symbol. Be sure to read the instructions, all of which are described in the Safety
Information section.
* The statements above are notes for your safety.
Important
If this instruction is not followed, paper might be misfed, originals might be
damaged, or data might be lost. Be sure to read this.
Preparation
This symbol indicates the prior knowledge or preparations required before op-
erating the machine.
Note
This symbol indicates precautions for operation, or actions to take after misop-
eration.
Limitation
This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.
Reference
This symbol indicates a reference.
[]
Keys that appear on the machine's display panel.
{}
Keys built into the machine's operation panel.
iv
Making Prints
Before making prints using this ma-
chine, you have to make a master by
pressing the {
{{
{Start}
}}
}key. When you
press the {
{{
{Start}
}}
}key, the machine
scans the original image and makes a
master. This procedure describes
how to make basic prints.
A
AA
APlace your originals in one of the
following two ways:
Placing originals on the exposure
glass
APlace a single page face down.
Inserting originals in the optional
document feeder
AInsert a stack of originals face
up.
Note
❒To avoid jamming, fan the
originals before placing them
in the document feeder.
B
BB
BPress the {
{{
{Start}
}}
}key.
C
CC
CPress the {
{{
{Proof}
}}
}key.
Check the print image.
Reference
For changing the image posi-
tion, see p.24 “Adjusting the Po-
sition of Printed Images”.
To increase the image density,
press the {
{{
{W
WW
W}
}}
}key. See p.25 “Ad-
justing the Image Density of
Prints”.
ZDCH110E
ZDCH120E
v
To decrease the image density,
press the {
{{
{V
VV
V}
}}
}key. See p.25 “Ad-
justing the Image Density of
Prints”.
D
DD
DEnter the desired number of
prints with the number keys.
E
EE
EPress the {
{{
{Print}
}}
}key.
When the print job has finished,
press the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key. Previously entered job set-
tings will be cleared.
vi
What You Can do with this Machine
Below is a quick summary of this ma-
chine's features and where to look in
this manual for more information.
❖
❖❖
❖Standard Printing
See p.19 “Standard Printing”.
❖
❖❖
❖Energy Saver Mode
See p.22 “Energy Saver Mode”
❖
❖❖
❖Adjusting the Print Image Position
See p.24 “Adjusting the Position of
Printed Images”.
* Paper feed direction
❖
❖❖
❖Adjusting the Print Image Density
See p.25 “Adjusting the Image
Density of Prints”.
❖
❖❖
❖Tint Mode
See p.26 “Tint Mode”.
❖
❖❖
❖Changing the Printing Speed
See p.27 “Changing the Printing
Speed”.
❖
❖❖
❖Reducing and Enlarging Using Preset
Ratios
See p.29 “Reducing and Enlarging
Using Preset Ratios”.
❖
❖❖
❖Auto Magnification
See p.31 “Auto Magnification”.
❖
❖❖
❖Zoom
See p.34 “Zoom”.
GRPOSI0E
GRTINT0E
GRRATI0E
GRAUTO0E
GRZOOM0E
vii
❖
❖❖
❖Directional Magnification (%)
See p.36 “Directional Magnifica-
tion (%)”.
❖
❖❖
❖Directional Magnification (Size)
See p.38 “Directional Magnifica-
tion (Size)”.
❖
❖❖
❖Erasing Center and Edge Margins
See p.40 “Erasing Center and Edge
Margins”.
❖
❖❖
❖Edge Erase
See p.41 “Edge Erase”.
❖
❖❖
❖Printing on Various Kinds of Paper
See p.43 “Printing onto Various
Kinds of Paper”.
❖
❖❖
❖Selecting Original Modes
See p.46 “Selecting Original
Modes”.
❖
❖❖
❖Economy Mode
See p.50 “Economy Mode”.
❖
❖❖
❖Auto Cycle
See p.51 “Auto Cycle”.
❖
❖❖
❖All Class Mode
See p.52 “All Class Mode”.
❖
❖❖
❖Auto Class Mode
See p.54 “Auto Class Mode”.
❖
❖❖
❖Manual Class Mode
See p.57 “Manual Class Mode with
One Original”.
a%
b%
CP2P01EE
13
24
CP2M01EE
GRERAS0E
AB AB
GRCLAS2E
GRCLAS2E
GRCLAS2E
Other manuals for 5499
1
Table of contents
Other Gestetner Copier manuals
Gestetner
Gestetner 1302 User manual
Gestetner
Gestetner CP6244 User manual
Gestetner
Gestetner DSc525 User manual
Gestetner
Gestetner CS213d User manual
Gestetner
Gestetner 3355 User manual
Gestetner
Gestetner 3240 User manual
Gestetner
Gestetner 10502 User manual
Gestetner
Gestetner P7245 Installation instructions
Gestetner
Gestetner DSm651 User manual
Gestetner
Gestetner 2703de User manual
Gestetner
Gestetner DSc224 Service manual
Gestetner
Gestetner 1502 Owner's manual
Gestetner
Gestetner DSc545 Service manual
Gestetner
Gestetner 5499 User manual
Gestetner
Gestetner DSm635sp Installation and maintenance instructions
Gestetner
Gestetner 10502 User manual
Gestetner
Gestetner F550 Manual
Gestetner
Gestetner 5309L Service manual
Gestetner
Gestetner CS555 User manual
Gestetner
Gestetner 6002 User instructions
