Genie SSAHD2D User manual
Quick Start Guide
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
2MP Stainless Steel AHD IR
Dome Camera with 3.6mm
Fixed Lens
SSAHD2D
Quick Start Guide 2MP Stainless Steel AHD IR Dome Camera with 3.6mm Fixed Lens
2
Features
• 1/2.8” Sony Starvis CMOS image sensor
• Full HD Mega Pixel (1080p)
• Auto compensation and long range transmission
• Stainless steel body (AISI 316L grade)
• 3.6mm megapixel lens
• 24 pcs pearl LED’s
• True day & night with ICR mechanism
• 3D DNR (Digital Noise Reduction)
• D-WDR (Digital Wide Dynamic Range)
• IP67 ingress protection
• DC12V
• Sens-Up
• 3 axis gimbal bracket
• Excellent Low illumination performance
• NDAA compliant
Specifications
Camera
Image Sensor 1/2.8” Sony Starvis CMOS sensor
Scanning System Progressive
Resolution 1080p
Minimum Illumination
Colour : 1.0 Lux, B&W : 0.5 Lux,
Colour DSS : 0.002 Lux,
B&W DSS : 0.0008 Lux
Lens 3.6mm megapixel fixed lens (ICR)
S / N Ratio More than 50dB (AGC Off)
Video Output Universal AHD, CVI, TVI: 1080p, 720p
Analogue: NTSC/ PAL CVBS
Functions
Sens-Up Off / x2 – x30
DNR Off / Low / Middle / High
Backlight Off / BLC / HSBLC
D-WDR Off / 0–8
Motion Detection Off / On
Privacy Mask 4 Masks
Others
Ingress Protection IP67
Power Supply DC12V (± 10%)
Power Consumption Max 4.0W
Working Environment Temperature: – 10°C ~ 50°C,
Humidity: 10 % ~ 85 %
Dimensions 118 × 88.5 mm
Weight 1310g
Quick Start Guide 2MP Stainless Steel AHD IR Dome Camera with 3.6mm Fixed Lens
3
Dimensions
Mode Change
CVBS Mode: Hold left on OSD key for 5 seconds
AHD Mode : Hold right on OSD key for 5 seconds
CVI Mode : Hold up on OSD key for 5 seconds
TVI Mode : Hold down on OSD key for 5 seconds
Cable
CAUTION! Please use regulated power supply DC12V 300mA
Reverse Polarity Protection
Installation
Step 1
118mm
88.5mm
Mounting Screws
Block
OSD (Option)
L-Wrench
Screws
Accessories
DC12V
VIDEO
OSD
Please tighten up 3pcs
of fixed screws with the
L-wrench after closing the
dome cover.
Step 2 Step 3
LEFTR IGHT
UP
DOWN
Other Genie Security Camera manuals
Genie
Genie IPB2AFIR Series User manual
Genie
Genie SSIP2B User manual
Genie
Genie WIPX8BVAF5 User manual
Genie
Genie GIPW4NPIR User manual
Genie
Genie WAHD2LBV User manual
Genie
Genie DN83SPX/12 Manual
Genie
Genie ZD2812WL User manual
Genie
Genie GMC3CH User manual
Genie
Genie WIP2BVLG User manual
Genie
Genie ZD5502 User manual
Genie
Genie SSIP2BVAF User manual
Genie
Genie M640 User manual
Genie
Genie SSAHD2D User manual
Genie
Genie WIP1VD User manual
Genie
Genie UMD300 Series User manual
Genie
Genie PWIPNW4B User manual
Genie
Genie ID73 User manual
Genie
Genie PWIP2BV User manual
Genie
Genie SSAHD2B User manual
Genie
Genie PWIPN2EBV User manual
