Fujitsu PRIMERGY RX600 S3 Owner's manual

PRIMERGY

PRIMERGY RX600 S3 SAS Server

Service Supplement

Joachim Pichol

Fujitsu Siemens Computers GmbH Paderborn

33094 Paderborn

e-mail: email: [email protected]

Tel.: (05251) 148 88-18

Fax: 0 700 / 372 000 01

Sprachen: En

Edition February 2007

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

Service Supplement RX600 S3 SAS

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Documentation overview . . . . . . . . . . . . . . . . . . . . 5

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.2 Environmental protection . . . . . . . . . . . . . . . . . . . 17

4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 21

4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.2 Opening/closing the server . . . . . . . . . . . . . . . . . . 22

4.3 Removing/inserting the processor cover . . . . . . . . . . . 24

4.4 Replacing the LocalView module . . . . . . . . . . . . . . . 27

4.5 Replacing the BMC board . . . . . . . . . . . . . . . . . . . 29

4.6 Replacing the control panel . . . . . . . . . . . . . . . . . . 31

4.7 Replacing the control panel board . . . . . . . . . . . . . . 32

4.8 Replacing the chassis ID module . . . . . . . . . . . . . . . 33

4.9 Replacing the SAS backplane . . . . . . . . . . . . . . . . . 35

4.10 Replacing RoMB components . . . . . . . . . . . . . . . . . 38

4.11 Replacing the system board . . . . . . . . . . . . . . . . . . 39

4.12 Replacing the power backplane . . . . . . . . . . . . . . . . 42

5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.1 Control panel board . . . . . . . . . . . . . . . . . . . . . . 43

Service Supplement RX600 S3 SAS

Contents

5.2 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . 44

5.3 BMC board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5.4 SAS backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 46

5.5 Power backplane . . . . . . . . . . . . . . . . . . . . . . . . 48

6 Cable connections . . . . . . . . . . . . . . . . . . . . . . . . 49

6.1 Cable overview . . . . . . . . . . . . . . . . . . . . . . . . . . 49

6.2 Cable plans . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Service Supplement RX600 S3 SAS 5

1 Preface

The PRIMERGY RX600 S3 SAS server is an Intel-based server for mid-size

applications in server farms. It is suitable for front-end services as well as for use

as an application, e-mail, or Internet server.

The server is used exclusively as a rack model. It offers a whole host of config-

uration options but only uses four height units (HU) in the 19-inch rack.

1.1 Documentation overview

Concept and target groups

This Service Supplement supplements the information contained in the

Operating Manual, the Options Guide and the Technical Manual for the system

board.

VATTENTION!

The activities described in this manual should only be performed by

specialist personnel with technical training.

IThe installation and removal of the hot-plug components is described in

the Operating Manual supplied with the server.

Service DVD

A service DVD is available for service partners of Fujitsu Siemens Computers.

This DVD contains the following manuals in PDF format:

– the Operating Manual for PRIMERGY RX600 S3 SAS

– the Options Guide for PRIMERGY RX600 S3 SAS

– the Technical Manual for the system board D2630

– the “D2630 BIOS Setup Utility” manual

– the “Ergonomics” manual

– the “Safety notes and other important information” manual

IThese PDF files can also be downloaded from the Internet free of

charge: At http://manuals.fujitsu-siemens.com you will find an overview

page showing the online documentation available on the Internet. You

can go to the PRIMERGY Server documentation by clicking on industry

standard servers.

6 Service Supplement RX600 S3 SAS

Documentation overview Preface

Information/Activity Manual

Features and technical data of the server Operating Manual

Installation and initial operation, such as:

– external connections to the server

– operation

– configuring the server

– installing the rack mounting kit

Troubleshooting

Installing/removing all hot-plug components:

– hot-plug power supply units

– hot-plug HDD modules

– hot-plug memory boards etc.

Extensions and conversions:

– expanding/replacing RAM modules

– installing additional processors/replacing

processors

– installing accessible drives

– installing controllers in non-hot-plug PCI

slots

– installing RemoteView components

Options Guide

Replacement routines:

– replacing the LocalView module

– replacing the BMC board

– replacing the control panel

– replacing the control panel board

– replacing a chassis ID board

– replacing the SAS backplane

– replacing RoMB components

– replacing the system board

– replacing the power backplane

Service Supplement

Settings

Cable connections

Table 1: Overview of the RX600 S3 SAS documentation (part 1 of 2)

Service Supplement RX600 S3 SAS 7

Preface Notational conventions

1.2 Notational conventions

The following notational conventions are used in this manual:

Information on the system board:

– features of the system board

– connector assignment

– jumper settings

– replacing the battery

Technical Manual

BIOS settings BIOS Setup Utility

Detailed safety information Manual “Safety notes and

other important information”

Italics indicate commands, menu items or software programs.

“quotation marks” indicate names of chapters and terms that need to be

emphasized.

Êindicates an activity that must be performed.

VATTENTION! indicates that, if you ignore the information given at this

point, your health, the correct functioning of your

system or the security of your data may be at risk.

Iindicates supplementary information, remarks and tips.

Table 2: Notational conventions

Information/Activity Manual

Table 1: Overview of the RX600 S3 SAS documentation (part 2 of 2)

Service Supplement RX600 S3 SAS 9

2Procedure

VATTENTION!

The activities described in this manual should only be performed by

engineers, service personnel or technical specialists.

ÊFirst of all please familiarize yourself with the safety instructions in the

chapter “Important notes” on page 11ff.

ÊMake sure that all the manuals you need (see service DVD) are available,

printing out the PDF files if necessary. You will definitely need the Operating

Manual for the server, the Options Guide for the server, and the Technical

Manual for the system board.

ÊShut down the server correctly, switch it off, pull out the power plugs, and

open the server as described in the chapter “Replacement routines” on

page 21ff.

ÊReplace the defective component as described in the relevant chapter.

ÊClose the server.

ÊConnect the cables to the server.1

ÊConnect the server to the mains.1

ÊStart the operating system.1

ÊIf necessary, configure the operating system as required.1

1These procedures are described in the Operating Manual.

Other manuals for PRIMERGY RX600 S3

Table of contents

Other Fujitsu Server manuals

Fujitsu

Fujitsu PRIMERGY BX620 S4 User manual

Fujitsu

Fujitsu PRIMERGY RX900 S2 User manual

Fujitsu

Fujitsu Primergy RX200 S4 User manual

Fujitsu

Fujitsu PRIMEQUEST 520A Technical manual

Fujitsu

Fujitsu Primergy RX300 S3 User manual

Fujitsu

Fujitsu FUTRO S450 User manual

Fujitsu

Fujitsu PRIMERGY RX4770 M2 User manual

Fujitsu

Fujitsu PRIMERGY TX100 S1 Owner's manual

Fujitsu

Fujitsu PRIMEQUEST 480 Guide

Fujitsu

Fujitsu Primergy RX4770 M1 User manual

Fujitsu

Fujitsu PRIMERGY BX960 S1 User manual

Fujitsu

Fujitsu PRIMERGY TX200 S5 User manual

Fujitsu

Fujitsu PRIMERGY RX2450 M1 User manual

Fujitsu

Fujitsu BS2000 SE700 User manual

Fujitsu

Fujitsu PRIMERGY RX100 S8 User manual

Fujitsu

Fujitsu Primergy BX920 S3 User manual

Fujitsu

Fujitsu Primergy RX100 S3 User manual

Fujitsu

Fujitsu Primergy BX920 S3 User manual

Fujitsu

Fujitsu PRIMERGY BX924 S2 User manual

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Assembly instructions

Fujitsu

Fujitsu PRIMERGY BX600 S3 User manual

Fujitsu

Fujitsu PRIMERGY TX150 S6 User manual

Fujitsu

Fujitsu SPARC M12-1 User manual

Fujitsu

Fujitsu SPARC Enterprise T5140 Service manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started