Fujitsu PRIMERGY RX2450 M1 User manual

FUJITSU Server PRIMERGY RX2450 M1

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

09/2021

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was

created to meet the regulations of a quality management system which complies with the

requirements of the standard DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

AMD is a registered trademark of AMD Corporation.

Welcome

Congratulations from Fujitsu on purchasing your new PRIMERGY server.

Product name: PRIMERGY RX2450 M1

Compliance model name: RX2450

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

RX2450 M1 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual RX2450 M1

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

RX2450 M1 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 03/2021 Initial release

V 2.0 09/2021 PDUAL CP100 added

Examples for cable routing SATA RAID

configurations added

Upgrade and Maintenance Manual RX2450 M1

Content

1 Introduction 15

1.1 Concept and target groups of this manual 15

1.2 Notational conventions 15

2 Before you start 17

2.1 Basic information 17

2.1.1 Proceeding 17

2.1.2 Installing optional components 17

2.1.3 Replacing a defective component 18

2.2 Classification of procedures 18

2.2.1 Assignment of unit categories 18

2.2.2 Customer Replaceable Units (CRU) 18

2.2.3 Upgrade and Repair Units (URU) 19

2.2.4 Field Replaceable Units (FRU) 20

2.3 Average task duration 21

2.4 Tools you need at hand 22

2.5 Documentation overview 22

2.5.1 Downloading manuals 22

2.5.2 List of documents 23

3 Important information 25

3.1 Introduction 25

3.2 Safety instructions 25

3.2.1 Basic safety instructions 25

3.2.2 Before starting up 26

3.2.3 Installation and operation 26

RX2450 M1 Upgrade and Maintenance Manual

3.2.4 Batteries 29

3.2.5 Modules with Electrostatic-Sensitive Devices (ESD modules) 29

3.2.6 Transporting the server 31

3.2.7 Installing the server in the rack 32

3.2.8 Other important information 32

3.3 CE conformity 33

3.4 FCC Class A Compliance Statement 33

3.5 Environmental protection 34

4 Basic hardware procedures 37

4.1 Using diagnostic information 37

4.1.1 Locating the defective server 37

4.1.2 Locating the defective component 37

4.2 Shutting down the server 37

4.3 Disconnecting the power cord 38

4.3.1 Disconnecting the power cord (AC PSU) 38

4.4 Getting access to the component 39

4.4.1 Safety notes 39

4.4.2 Extending the server out of the rack 40

4.4.3 Removing the server from the rack 41

4.4.4 Removing the top cover 43

4.5 Reassembling 44

4.5.1 Safety notes 44

4.5.2 Installing the top cover 44

4.5.3 Installing the server in the rack 45

4.5.4 Sliding the server into the rack 47

4.6 Connecting the power cord 48

4.6.1 Connecting the power cord 48

4.7 Switching on the server 49

Content

Upgrade and Maintenance Manual RX2450 M1

4.8 Handling riser modules 50

4.8.1 Positions of riser modules 50

4.8.2 Removing a riser module 50

4.8.3 Installing a riser module 54

4.9 Handling the air duct 61

4.9.1 Positions of riser modules 61

4.9.2 Removing the air ducts 62

4.9.3 Installing the air duct 63

5 Basic software procedures 67

5.1 Starting the maintenance task 67

5.1.1 Backing up the setting information of BIOS or BMC 67

5.1.2 Verifying and configuring the backup software solution 67

5.1.3 Switching on the ID indicators 67

5.2 Completing the maintenance task 68

5.2.1 Updating or recovering the BIOS and BMC 68

5.2.2 Enabling Option ROM scan 69

5.2.3 Verifying the system time settings 70

5.2.4 Viewing and clearing the System Event Log (SEL) 70

5.2.5 Updating the NIC configuration file in a Linux environment 71

5.2.6 Performing a RAID array rebuild 72

5.2.7 Looking for the MAC address of a LAN controller 73

5.2.8 Switching off the ID identicators 74

6 Power supply unit (PSU) 75

6.1 Safety notes 75

6.2 Basic information 75

6.3 Redundant power supply 76

6.3.1 Installing a hot-plug PSU 76

6.3.2 Removing a hot-plug PSU 79

6.3.3 Replacing a hot-plug PSU 80

Content

RX2450 M1 Upgrade and Maintenance Manual

7 Hard disk drive (HDD) / solid state disk (SSD) 83

7.1 Safety notes 83

7.2 Basic information 84

7.3 2.5-inch HDD/SSD configurations 84

7.3.1 Overview of configurations 84

7.3.1.1 Configuration with 24 HDD/SSD modules 84

7.3.2 Installing 2.5-inch HDD/SSD modules 85

7.3.3 Removing 2.5-inch HDD/SSD modules 91

7.3.4 Replacing a 2.5-inch HDD/SSD module 93

7.3.5 Replacing the HDD backplane 95

8 Fans 99

8.1 Safety notes 99

8.2 Basic information 99

8.3 Replacing a fan module 100

9 Expansion cards and riser cards 103

9.1 Safety notes 103

9.2 Basic information 103

9.3 Expansion cards in riser modules 105

9.3.1 Installing a RAID controller in riser module 1 105

9.3.2 Removing a RAID controller from riser module 1 107

9.3.3 Replacing a RAID controller from riser module 1 109

9.3.4 Installing an expansion card in riser module 2 110

9.3.5 Removing an expansion card from riser module 2 115

9.3.6 Replacing an expansion card from riser module 2 116

9.3.7 Examples for cable routing 118

9.3.7.1 SATA RAID configurations of 16 HDDs/SSDs 118

9.3.7.2 SATA RAID configurations of 20 HDDs/SSDs 122

Content

Upgrade and Maintenance Manual RX2450 M1

Table of contents

Other Fujitsu Server manuals

Fujitsu

Fujitsu M10 Series User manual

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Technical manual

Fujitsu

Fujitsu PRIMERGY RX2540 M1 User manual

Fujitsu

Fujitsu PRIMERGY TX2560 M2 User manual

Fujitsu

Fujitsu Primergy RX100 S3 User manual

Fujitsu

Fujitsu PRIMERGY BX900 User manual

Fujitsu

Fujitsu PRIMERGY TX140 S2 User manual

Fujitsu

Fujitsu PRIMERGY GX2560 M7 User manual

Fujitsu

Fujitsu SPARC Enterprise M3000 Service manual

Fujitsu

Fujitsu PRIMERGY BX960 S1 User manual

Fujitsu

Fujitsu Primergy BX900 S2 User manual

Fujitsu

Fujitsu SPARC Enterprise T5440 Server User manual

Fujitsu

Fujitsu PRIMERGY RX300 S6 User manual

Fujitsu

Fujitsu PRIMERGY TX100 S1 User manual

Fujitsu

Fujitsu Primergy RX100 S2 User manual

Fujitsu

Fujitsu PRIMERGY TX200 S2 Guide

Fujitsu

Fujitsu Primergy TX300 S4 User manual

Fujitsu

Fujitsu SPARC Enterprise M8000 User manual

Fujitsu

Fujitsu PRIMERGY S60 User manual

Fujitsu

Fujitsu SPARC Enterprise M8000 Service manual

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Instruction Manual

Fujitsu

Fujitsu PRIMERGY BX620 S4 User manual

Fujitsu

Fujitsu Primergy RX300 S4 User manual

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Service manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started