Fujitsu PRIMERGY RX200 S6 User manual

Options Guide - English

PRIMERGY RX200 S6 Server

Options Guide

Edition November 2011

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]ujitsu.com.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX200 S6 Options Guide

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Options Guide RX200 S6

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

RX200 S6 Options Guide

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

Options Guide RX200 S6

RX200 S6 Options Guide

Contents

1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10

1.3 Expansions and conversions . . . . . . . . . . . . . . . . . 12

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 14

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 17

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1 Pulling the server out of the rack . . . . . . . . . . . . . . . 26

4.2 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 27

4.3 Removing the air duct . . . . . . . . . . . . . . . . . . . . . 29

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.1 Memory modules . . . . . . . . . . . . . . . . . . . . . . . . 32

5.2 Expanding the main memory . . . . . . . . . . . . . . . . . 33

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6.1 Installing a second processor . . . . . . . . . . . . . . . . . 36

6.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . 39

6.3 Replacing the heat sink . . . . . . . . . . . . . . . . . . . . 42

7 Accessible drive . . . . . . . . . . . . . . . . . . . . . . . . 43

Contents

7.1 Installing a SATA DVD drive . . . . . . . . . . . . . . . . . . . 44

8 HDD modules . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.1 Installing additional HDD cage . . . . . . . . . . . . . . . . . 48

9 Expansion cards and iBBU . . . . . . . . . . . . . . . . . . . 55

9.1 Installing an expansion card . . . . . . . . . . . . . . . . . . 56

9.2 Installing a modular RAID controller . . . . . . . . . . . . . . 61

9.3 Installing an iBBU . . . . . . . . . . . . . . . . . . . . . . . . 62

10 Further options . . . . . . . . . . . . . . . . . . . . . . . . . 69

10.1 Trusted Platform Module (TPM) . . . . . . . . . . . . . . . . . 69

10.2 USB Flash Module (UFM) . . . . . . . . . . . . . . . . . . . . 71

11 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

11.1 Installing the air duct . . . . . . . . . . . . . . . . . . . . . . 73

11.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 76

12 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

12.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Options Guide RX200 S6

RX200 S6 Options Guide 9

1 Preface

The PRIMERGY RX200 S6 rack server is a universal and high-performance

platform designed for a whole range of application areas in data center and

server farm concepts. The ultra-compact rack server is ideal for web services

and solutions such as caching, gateway and firewall applications. Other

application areas include front-end solutions (tier 1) in modern multi-tier

configurations, and e-mail service and appliance solutions.

The PRIMERGY RX200 S6 offers a balanced architecture that incorporates

next generation main memory (DDR3) and I/O technologies (PCIe Gen2). The

backplane is already provided for SAS 2.0 and 6 Gbit/s SAS and the chipset

prepared for the next generation of 6-core processors. High performance,

scalability, impressive reliability and excellent extension options are combined

in a powerful design.

The Cool-safe™ cooling concept with improved air flow cooling technology

(honeycomb design) ensures the highest possible performance of the

processors at work; at the same time, the system is extremely reliable thanks to

the reduced heat dissipation.

The highly compact server occupies just one height unit (HU) in the rack.

1.1 Concept and target groups

This Options Guide shows you how to extend and upgrade your server.

VCAUTION!

The activities described in this manual may only be performed by

technical specialists.

IThe installation and removal of the hot-plug components is described in

the Operating Manual supplied with the server.

10 Options Guide RX200 S6

Preface

1.2 Documentation overview

More information on your PRIMERGY RX200 S6 can be found in the following

documents:

– "Quick Start Hardware - PRIMERGY RX200 S6" leaflet

"はじめにお読みください -PRIMERGY RX200 S6" for the Japanese market

(only included as a printed copy)

– "Quick Start Software - Quick Installation Guide" DVD booklet

(only included with the ServerView Suite as a printed copy) except for the

Japanese market

– "Safety notes and other important information" manual

"安全上の注意およびその他の重要情報 " for the Japanese market

– "Warranty" manual

"保証書 " for the Japanese market

– "ServerView Suite Local Service Concept - LSC" manual

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for the Japanese market

– "PRIMERGY RX200 S6 Server Operating Manual"

– "PRIMERGY RX200 S6 Server Options Guide"

– "System Board D3031 for PRIMERGY RX200 S6 Technical Manual"

– "D3031 BIOS Setup Utility for RX200 S6" manual

Other manuals for PRIMERGY RX200 S6

Table of contents

Other Fujitsu Server manuals

Fujitsu

Fujitsu GP 7000F User manual

Fujitsu

Fujitsu PRIMERGY RX200 S5 User manual

Fujitsu

Fujitsu PRIMERGY TX150 S4 User manual

Fujitsu

Fujitsu PRIMERGY RX300 S7 User manual

Fujitsu

Fujitsu PRIMERGY Econel 100 User manual

Fujitsu

Fujitsu PRIMERGY BX620 S4 User manual

Fujitsu

Fujitsu Primergy CX270 S2 User manual

Fujitsu

Fujitsu primergy TX150 User manual

Fujitsu

Fujitsu PRIMERGY RX800 S2 User manual

Fujitsu

Fujitsu 1FINITY L100 User manual

Fujitsu

Fujitsu SPARC Enterprise M5000 Installation guide

Fujitsu

Fujitsu PRIMERGY TX120 S2 User manual

Fujitsu

Fujitsu BS2000 SE Series User manual

Fujitsu

Fujitsu SPARC M12 User manual

Fujitsu

Fujitsu PRIMERGY DX920 S3 Manual

Fujitsu

Fujitsu PRIMERGY SX05 S1 User manual

Fujitsu

Fujitsu PRIMERGY TX100 S3 User manual

Fujitsu

Fujitsu SPARC Enterprise M3000 User manual

Fujitsu

Fujitsu PRIMERGY RX4770 M2 User manual

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 User manual

Fujitsu

Fujitsu PRIMERGY BX900 User manual

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Operating and installation instructions

Fujitsu

Fujitsu PRIMERGY CX122 S1 Owner's manual

Fujitsu

Fujitsu PRIMERGY TX300 S7 User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

Dell

Dell PowerEdge R410 Getting started

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

Dell

Dell PowerEdge XE9640 Installation and service manual

Dell

Dell PS4100 Hardware

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

Dell

Dell PowerEdge 3YPMN Getting started guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started