Fujitsu FTP-631MCL301 User manual

FTP-631MCL301/302

■OVERVIEW

This thermal printer (driven by 24 VDC) and cutter provide high

speed printing for 3-inch wide paper (85 mm). This printer is small in

size, light weight, and has low power consumption. The print head is

designed with open construction for easy maintenance.

This printer is suitable for a variety of applications, such as POS

terminals, ticket machines, label printers, measuring devices and

medical equipment.

Inadditiontotheinterfaceboard,adrivingLSI(MCU+GateArray)is

also available.

■HIGHLIGHTS

• Ultra high speed printing

It can print at 100 mm/s (800 dotlines/s) by using Fujitsu

Components' unique head drive control system.

• Auto cutter

Full or partial cutting is available by normal or reverse rotation of

the motor (command set).

• Low power consumption

The peak current for head driving is approximately 5.2 A (at 50

mm/s printing speed, 50% printing ratio).

• Easy head access

Head-open construction makes head maintenance easy,

especially for head cleaning.

• Paper auto loading function

The thermal paper can be loaded without head-up lever

operation.

• High resolution

8 dots/mm head provides clear print output.

• Selectable paper paths

Front or rear insertion types are available.

FTP-631MCL302 can print onpaperthicknessesofupto 150 µm.

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER

3” MECHANISM, WITH AVAILABLE CUTTER

FTP-631MCL301/302 shown after

assembly with FTP-631CT001cutter

FTP-621DCL012

FTP-621CU102, FTP-633GA101

FTP-631MCL301/302

■DESIGNATION

Part number

Front paper insertion type

Rear paper insertion type (supports thick paper)

FTP-631MCL301

FTP-631MCL302

FTP-631CT001

FTP-621DCL012

FTP-621CU102

FTP-633GA101

Item

Printer mechanism

Micro Controller Unit

Gate Array

LSI

Interface board

Cutter

Printing method Thermal-sensitive line dot method

Dot structure 640 dots/line

Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density

Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch

Effective printing area 80 mm

Number of columns 53 columns/line (maximum)—Alphanumeric KANA

Maximum printing speed 800 dot lines/s (100 mm/s) maximum

JIS ANK : 128 International characters : 130

Character types Semi-graphic : 63 ASCII small characters : 31

Download : 384

24 ×12 dots, (3.0 ×1.5 mm), 53 columns

32 ×16 dots, (4.0 ×2.0 mm), 40 columns

24 ×24 dots, (3.0 ×3.0 mm), 26 columns

32 ×32 dots, (4.0 ×4.0 mm), 20 columns

Interface 1) Centronics standard 2) Bus interface*1

Cutting method Guillotine method

Cutting type Full-cut or partial cut (command set)

Minimum cut length 20 mm

Paper thickness 65 to 150 µm

■GENERAL SPECIFICATIONS

SpecificationsItem

Character composition, dimensions (H×W),

Number of columns (standard)

Cutter

(Continued)

FTP-631MCL301/302

24 VDC ±5%, average:*2

0.33 (1.72) A (at 25 mm/s printing speed, 25% printing ratio)

For head 0.64 (2.58) A (at 50 mm/s printing speed, 25% printing ratio)

2.37 (4.29) A (at 100 mm/s printing speed, 25% printing ratio)

( ): Peak

For motor 24 VDC ±5%, 1.0 A maximum

For logic 5 VDC ±5%, 0.5 A maximum

Weight Mechanism with cutter: approx. 540 g. Interface board: approx. 100 g

Mechanism + cutter 132 (W) ×60 (D) ×71.0 (H) mm (excluding connector)

Interface board 140 (W) ×89 (D) ×24.0 (H) mm

Pulse durability : 1 ×108pulse/dot (using Fujitsu Takamisawa's standard

driving method)

Wear resistance: 50 km (at 25% printing ratio)

Cutter Cutting life: 3 ×105times

Operating temperature +5 to +40°C*3

Operating humidity 20 to 85% RH (no condensation)

Storage temperature –20 to +60°C (excluding paper)

Storage humidity 5 to 95% RH (no condensation)

Head temperature By thermistor (applied energy control, abnormal temperature detection)

Detection Paper out/Mark detect By photointerrupter (command set)

Head-up By microswitch

Paper width 85 mm

1 ply paper in roll : FTP-030P0020

Thicker paper in roll : FTP-030PJ102*4

SpecificationsItem

(Continued)

Power supply

Dimensions

Thermal head

Life

Environmental

conditions

–1

*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame

memory). The communication is parameter transfer.

*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.

*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.

*4: Printer mechanism FTP-631MCL302 is to be used.

*5: Please contact us for other thermal papers.

Recommended thermal sensitive

paper*5

FTP-631MCL301/302

■DIMENSIONS

Printer mechanism with cutter

Unit: mm

JAPAN

68 (At cutter open)

35.5 (Mounting hole)

40.5

7.5 (300)

(76)

<FTP-631MCL301>

<FTP-631MCL302>

Paper insertion

Y-Y SECTION

11.8

2-M3 Burring

25.4

Mounting screw

2.5 (Mounting hole)

52.1 (Center of paper & connector)

106.2 (Mounting hole)

132

21.9

14.2

315

94.8

Paper insertion

Note:

All dimensions are nominal value.

FTP-631MCL301/302

Interface board

Unit: mm

CN3 CN4 CN9 CN2

CN5 CN6 CN1 CN10

CN11

CN7

Height of devices side

Height of solder side

139.7

129.6

113.1

22.9

73.7

14.0

(5.1)

88.9

78.8

(5.1)

14.0 31.8 15.3 88.9 (5.1)

(5.1)

28.0

25.4

4—ø3.6

23.6

1.6

■INTERFACE, COMMAND, OPTIONS

Please refer to the FTP-621DCL002/012 DATA SHEET for Interface, Command, and Options.

FTP-631MCL301/302

trademarks of their respective owners. Rev. 09/2001

Japan

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku

Tokyo 141, Japan

Tel: (81-3) 5449-7010

Fax: (81-3) 5449-2626

Email: [email protected]

Web: www.fcl.fujitsu.com

North and South America

Fujitsu ComponentsAmerica, Inc.

250 E. Caribbean Drive

Sunnyvale, CA 94089 U.S.A.

Tel: (1-408) 745-4900

Fax: (1-408) 745-4970

Email: [email protected]

Web: www.fcai.fujitsu.com

Europe

Fujitsu Components Europe B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Tel: (31-23) 5560910

Fax: (31-23) 5560950

Email: [email protected]

Web: www.fceu.fujitsu.com

Asia Pacific

Fujitsu Components Asia Ltd.

102E Pasir Panjang Road

#04-01 Citilink Warehouse Complex

Singapore 118529

Tel: (65) 375-8560

Fax: (65) 273-3021

Email: [email protected]

www.fcal.fujitsu.com

Fujitsu Components

International

Headquarter

Offices

This manual suits for next models

Table of contents

Other Fujitsu Printer manuals

Fujitsu

Fujitsu DL3100 User manual

Fujitsu

Fujitsu FTP-628MCL053 User manual

Fujitsu

Fujitsu TM 14ADV User manual

Fujitsu

Fujitsu FTP-628MCL101 User manual

Fujitsu

Fujitsu FTP-628WSL210 Series User manual

Fujitsu

Fujitsu ScanSnap iX100 Instruction Manual

Fujitsu

Fujitsu DPMG9 User manual

Fujitsu

Fujitsu FTP-624DSL113 User manual

Fujitsu

Fujitsu fi-4530C Configuration guide

Fujitsu

Fujitsu DL7400Pro User manual

Fujitsu

Fujitsu FTP-608 Series User manual

Fujitsu

Fujitsu fi-4x20 SERIES Configuration guide

Fujitsu

Fujitsu DL900 User manual

Fujitsu

Fujitsu DL3400 User manual

Fujitsu

Fujitsu fi-4530C Configuration guide

Fujitsu

Fujitsu DL-3800 User manual

Fujitsu

Fujitsu fi-8190 Manual

Fujitsu

Fujitsu FTP-638WSL110 Series User manual

Fujitsu

Fujitsu SP-1120 Manual

Fujitsu

Fujitsu N7100E User manual

Fujitsu

Fujitsu ScanSnap S500 Configuration guide

Fujitsu

Fujitsu FP-1000 User manual

Fujitsu

Fujitsu FTP-627 Series User manual

Fujitsu

Fujitsu Impact 4550 PRO User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide