Frigidaire FHWC084WB1 User manual

Frigidaire.com USA 1-800-944-9044 Frigidaire.ca Canada 1-800-265-8352

use &care

Room Air Conditioner

16120300A28643 (July 2019)

Introduction...................................................... 2

Important Safety Instructions.................... 3

Operating Instructions............................... 9

Care and Cleaning........................................ 15

Energy Saving Ideas.................................... 16

Before You Call............................................. 17

Major Appliance Limited Warranty....... 19

Air Conditioner Features............................ 8

Packaging.........................................................

Normal Sounds...............................................

2INTRODUCTION

Welcome to our family

Model Number

Serial Number

Purchase Date

Thank you for bringing Frigidaire into your

home! We see your purchase as the

beginning of a long relationship together.

This manual is your resource for the use and

care of your product. Please read it before

using your appliance. Keep it handy for

quick reference. If something doesn’t seem

right, the troubleshooting section will help

you with common issues.

FAQs, helpful tips and videos, cleaning

products, and kitchen and home accessories

are available at www.frigidaire.com.

We are here for you! Visit our website, chat

with an agent, or call us if you need help. We

may be able to help you avoid a service visit.

If you do need service, we can get that

started for you.

Let’s make it ocial! Be sure to register your

product.

Keep your product info here so it’s easy to

ﬁnd.

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Do not store or use gasoline or other

ﬂammable vapors and liquids in the vicinity

of this or any other appliance. Read product

labels for ﬂammability and other warnings.

Prevent Accidents

WARNING

To reduce the risk of ﬁre, electrical shock, or

injury to persons when using your air

conditioner, follow basic precautions,

including the following:

đBe sure the electrical service is adequate

for the model you have chosen. This

information can be found on the serial

plate, which is located on the side of the

cabinet and behind the grille.

đIf the air conditioner is to be installed in a

window, you will probably want to clean

both sides of the glass ﬁrst. If the window

is a triple-track type with a screen panel

included, remove the screen completely

before installation.

đBe sure the air conditioner has been

securely and correctly installed according

to the separate installation instructions

provided with this manual. Save this

manual and the installation instructions for

possible future use in removing or

reinstalling this unit.

đWhen handling the air conditioner, be

careful to avoid cuts from sharp metal ﬁns

on front and rear coils.

WARNING

Avoid ﬁre hazard or electric shock. Do not

use an extension cord or an adaptor plug.

Do not remove any prong from the power

cord.

Electrical Information

WARNING

The complete electrical rating of your new

room air conditioner is stated on the serial

plate. Refer to the rating when checking the

electrical requirements.

đBe sure the air conditioner is properly

grounded. To minimize shock and fire

hazards, proper grounding is important.

The power cord is equipped with a

three-prong grounding plug for protection

against shock hazards.

đYour air conditioner must be used in a

properly grounded wall receptacle. If the

wall receptacle you intend to use is not

adequately grounded or protected by a

time delay fuse or circuit breaker, have a

qualified electrician install the proper

receptacle.

đDo not run air conditioner without outside

protective cover in place. This could result

in mechanical damage within the air

conditioner.

đDo not use an extension cord or an

adapter plug.

Grounding type wall receptacle

Do not, under any

circumstances, cut,

remove, or bypass the

grounding prong.

Power supply cord

with 3-prong grounding

plug and current

detection device

4IMPORTANT SAFETY INSTRUCTIONS

NOTE

The power supply cord with this air

conditioner contains a current detection

device designed to reduce the risk of ﬁre.

Please refer to the section ‘Operation of

Current Device’ for details.

In the event that the power supply cord is

damaged, it cannot be repaired. It must be

replaced with a cord from the product

manufacturer.

SAFETY PRECAUTIONS

DANGER! Avoid Serious Injury or Death

đThis air conditioner contains no

user-serviceable parts. Always call an

authorized Electrolux servicer for repairs.

đDo not insert or place ﬁngers or objects

into the air discharge area in the front of

the unit.

đDo not start or stop the air conditioner by

unplugging the power cord or turning o

the power at the electrical box.

đDo not cut or damage the power cord.

đIf the power cord is damaged, it should

only be replaced by an authorized

Electrolux servicer.

đIn the event of a malfunction (sparks,

burning smell, etc.), immediately stop the

operation, disconnect the power cord, and

call an authorized Electrolux servicer.

đDo not operate the air conditioner with

wet hands.

đDo not pull on the power cord.

đDo not drink any water that is drained

from the air conditioner.

SAFETY PRECAUTIONS

CAUTION! Avoid Injury or damage to the

unit or other property

đProvide ventilation per installation

instructions.

đDo not direct airflow at fireplaces or other

heat related sources as this could cause

flare ups or make units run excessively.

đDo not climb on or place objects on

outdoor part of the unit.

đDo not hang objects off the unit.

đDo not place containers with liquids on

the unit.

đTurn off the air conditioner at the power

source when it will not be used for an

extended period of time.

đPeriodically check the condition of the

unit’s installation accessories for any

damage.

đDo not apply heavy pressure to the

radiator fins of the unit.

đOperate the unit without air filter in place.

đDo not block or cover the intake grille,

discharge area and outlet ports.

đEnsure that any electrical/electronic

equipment is one yard away from the unit.

đDo not use or store flammable gases near

the unit.

đDo not touch the metal parts of the unit

when removing the filter. Injuries can

occur when handling sharp metal edges.

đDo not use water to clean inside the air

conditioner. Exposure to water can

destroy the insulation, leading to possible

electric shock.

đWhen cleaning the unit, first make sure

that the power and circuit breaker are

turned off.

WARNING

FOR FLAMMABLE REFRIGERANT

đƫ+ƫ*+0ƫ1/!ƫ)!*/ƫ0+ƫ!(!.0!ƫ0$!ƫ

defrosting process or to clean, other than

those recommended by the manufacturer.

đƫ+ƫ*+0ƫ,%!.!ƫ+.ƫ1.*ċ

đƫ!ƫ3.!ƫ0$0ƫ0$!ƫ.!".%#!.*0/ƫ)5ƫ*+0ƫ

contain an odour.

đƫ+),(%*!ƫ3%0$ƫ*0%+*(ƫ#/ƫ.!#1(0%+*/ƫ

shall be observed.

đƫ!!,ƫ2!*0%(0%+*ƫ+,!*%*#/ƫ(!.ƫ+"ƫ

obstruction.

5IMPORTANT SAFETY INSTRUCTIONS

đƫ$!ƫ,,(%*!ƫ/$((ƫ!ƫ/0+.! ƫ%*ƫƫ.++)ƫ

without continuously operating ignition

sources (for example: open flames, an

operating gas appliance) and ignition

sources or (for example: an operating

electric heater) close to the appliance.

đƫ$!ƫ,,(%*!ƫ/$((ƫ!ƫ/0+.! ƫ/+ƫ/ƫ0+ƫ

prevent mechanical damage from

occurring.

đƫƫ3.*%*#ƫ0$0ƫ0$!ƫ,,(%*!ƫ/$((ƫ!ƫ

stored in a well-ventilated area where the

room size corresponds to the room area

as specified for operation.

đƫ*5ƫ,!./+*ƫ3$+ƫ%/ƫ%*2+(2! ƫ3%0$ƫ3+.'%*#ƫ

on or breaking into a refrigerant circuit

should hold a current valid certificate from

an industry-accredited assessment

authority, which authorizes their

competence to handle refrigerants safely

in accordance with an industry recognized

assessment specification.

đƫ!.2%%*#ƫ/$((ƫ+*(5ƫ!ƫ,!."+.)! ƫ/ƫ

recommended by the equipment

manufacturer. Maintenance and repair

requiring the assistance of other skilled

personnel shall be carried out under the

supervision of the person competent in

the use of flammable refrigerants.

đƫƫƫ)+ %"5ƫ0$!ƫ(!*#0$ƫ+"ƫ0$!ƫ,+3!.ƫ

cord or use an extension cord to power

the unit.

đƫƫƫ/$.!ƫƫ/%*#(!ƫ+10(!0ƫ3%0$ƫ+0$!.ƫ

electrical appliances. Improper power

supply can cause fire or electrical shock.

đƫ(!/!ƫ"+((+3ƫ0$!ƫ%*/0.10%+*ƫ.!"1((5ƫ0+ƫ

handle, install, clear, service the air

conditioner to avoid any damage or

hazard. Flammable Refrigerant R32 is used

within air conditioner. When maintaining

or disposing the air conditioner, the

refrigerant (R32 or R290) shall be

recovered properly, shall not discharge to

air directly.

đƫ+ƫ*5ƫ+,!*ƫ"%.!ƫ+.ƫ !2%!ƫ(%'!ƫ/3%0$ƫ

which may generate spark/arcing shall be

around air conditioner to avoid causing

ignition of the flammable refrigerant used.

Please follow the instruction carefully to

store or maintain the air conditioner to

prevent mechanical damage from

occurring.

đƫ())(!ƫ.!".%#!.*0ƫġƫăĂƫ%/ƫ1/! ƫ%*ƫ%.ƫ

conditioner. Please follow the instruction

carefully to avoid any hazard.

đƫ$!ƫ.!".%#!.0%*#ƫ/5/0!)ƫ/$+1( ƫ*+0ƫ

receive maintenance, service, or repair by

any person.

đƫ*/1.!ƫ0$0ƫ0$!ƫ.!ƫ%/ƫ%*ƫ0$!ƫ+,!*ƫ+.ƫ0$0ƫ

it is adequately ventilated before breaking

into the system or conducting any hot

work. A degree of ventilation shall

continue during the period that the work

is carried out. The ventilation should safely

disperse any released refrigerant and

preferably expel it externally into the

atmosphere.

đƫ$!'ƫ0$0ƫ(%*#ƫ3%((ƫ*+0ƫ!ƫ/1&!0ƫ0+ƫ

wear, corrosion, excessive pressure,

vibration, sharp edges or any other

adverse environmental effects. The check

shall also take into account the effects of

aging or continual vibration from sources

such as compressors or fans.

đƫ* !.ƫ*+ƫ%.1)/0*!/ƫ/$((ƫ,+0!*0%(ƫ

sources of ignition be used in the

searching for or detection of refrigerant

leaks. A halide torch (or any other

detector using a naked flame) shall not be

used. The following leak detection

methods are deemed acceptable for all

refrigerant systems. Electronic leak

detectors may be used to detect

refrigerant leaks but, in the case of

FLAMMABLE REFRIGERANTS, the

sensitivity may not be adequate, or may

need re-calibration. (Detection equipment

shall be calibrated in a refrigerant-free

area.) Ensure that the detector is not a

potential source of ignition and is suitable

for the refrigerant used. Leak detection

equipment shall be set at a percentage of

6IMPORTANT SAFETY INSTRUCTIONS

NOTE

đƫDo not use this device to turn the unit on

or off.

đƫAlways make sure the RESET button is

pushed in for correct operation.

đƫThe power supply cord must be replaced

if it fails to reset when either the TEST

button is pushed, or it cannot be reset. A

new one can be obtained from the

product manufacturer.

đƫIf power supply cord is damaged, it

CANNOT be repaired. It MUST be replaced

by one obtained from the product

manufacturer.

Plug in & press RESET

1. Plug in the Air Conditioner.

2. The power supply cord will have TWO

buttons on the plug head. Press the TEST

button. You will notice a click as the

RESET button pops out.

3. Press the RESET button again, you will

notice a click as the button engages.

4. The power supply cord is now supplying

electricity to the unit. (This is also

indicated by a light on the plug head).

READ THIS SECTION BEFORE ATTEMPTING

TO OPERATE AIR CONDITIONER.

Unit must be upright for one hour prior to

operating.

The power supply cord contains a current

device that senses damage to the power

cord. To test your power supply cord do the

following:

Operation of Current Device

CAUTION

đƫ$%/ƫ,,(%*!ƫ%/ƫ*+0ƫ%*0!* ! ƫ"+.ƫ1/!ƫ5ƫ

persons (including children) with reduced

physical, sensory or mental capabilities or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the

appliance by a person responsible for their

safety.

đƫ$%( .!*ƫ/$+1( ƫ!ƫ/1,!.2%/! ƫ0+ƫ!*/1.!ƫ

that they do not play with the appliance.

đƫ"ƫ0$!ƫ/1,,(5ƫ+. ƫ%/ƫ )#! Čƫ%0ƫ)1/0ƫ!ƫ

replaced by the manufacturer, its service

agent or similarly qualified persons in

order to avoid a hazard.

đƫ$!ƫ,,(%*!ƫ/$((ƫ!ƫ%*/0((! ƫ%*ƫ

accordance with national wiring

regulations.

the LFL of the refrigerant and shall be

calibrated to the refrigerant employed,

and the appropriate percentage of gas (25

% maximum) is confirmed. Leak detection

fluids are also suitable for use with most

refrigerants but the use of detergents

containing chlorine shall be avoided as the

chlorine may react with the refrigerant

and corrode the copper pipe-work.

NOTE Examples of leak detection fluids

are

– bubble method,

– fluorescent method agents.

If a leak is suspected, all naked flames

shall be removed/extinguished.

If a leakage of refrigerant is found contact

local manufacture to replace unit.

7PACKAGING & NORMAL SOUNDS

Explanation of symbols displayed on the unit

WARNING

This symbol shows that this appliance used a flammable

refrigerant. If the refrigerant is leaked and exposed to an

external ignition source, there is a risk of fire.

This symbol shows that the operation manual should be read

carefully.

This symbol shows that a service personnel should be

handling this equipment with reference to the installation

manual.

This symbol shows that information is available such as the

operating manual or installation manual.

CAUTION

Packaging

Normal Sounds

Remove all packaging from inside the

carton, along with any inserts placed into

the side louvers.

PACKAGING INSERTS

3 4 5

Vibration

Unit may vibrate and make noise

because of poor wall or window

construction or incorrect installation.

Pinging or Swishing

Droplets of water hitting condenser

during normal operation may cause

“pinging or swishing” sounds.

Note: Don’t try to drill any holes on the

base pan to eliminate the normal

sounds, otherwise it will void the

warranty.

Gurgle/Hiss

“Gurgling or hissing” noise may be

heard due to refrigerant passing

through evaporator during normal

operation.

Sound of Rushing Air

At the front of the unit, you may hear

the sound of rushing air being moved

by the fan.

High pitched Chatter

Today’s high eciency compressors

may have a high pitched chatter during

the cooling cycle.

Noise when unit starts

A “da-da” sound may occur when the

unit is turned on in thirty seconds due

to the compressor starting (For Inverter

type). It is normal.

8AIR CONDITIONER FEATURES

ELECTRONIC CONTROL

Before you begin, thoroughly familiarize yourself with the control panel and remote control

and all its functions (as shown below). The unit can be controlled by the touch pad alone, or

with the remote control.

Air Conditioner Features

IJKL

ATurns Unit On Or O

BSet Mode

CAdjusts Temperature/Timer

DFan speed display

EFan speed button

FSleep button

GTimer button

HTimer icon

IPureAirTM Filter icon

JDust Filter change icon

KDisplays Temperature/Time

LChild lock icon

REMOTE CONTROL

A B E F G HDC

Battery Size: AAA

Warning: Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc),

or rechargeable (nickel-cadmium) batteries.

Caution for ingestion. Keep out of the reach

of children.

Note: Some feature can only be controlled

by control panel.

9OPERATING INSTRUCTIONS

NOTE

The following instructions represent the

touch pad. The same instructions can be

used for the remote control.

TO TURN UNIT ON:

PRESS ON/OFF BUTTON

DO THIS:

YOU WILL SEE:

NOTE: The unit will run in Eco(energy

saver) mode when powered on each time,

if last shutdown is in cool or Eco(energy

saver) mode. In this mode, the fan will

continue to run for 3 minutes after

compressor shuts o. The fan then cycles on

for 120 seconds at 10 minutes intervals until

the room temperature is above the set

temperature, at which time the compressor

turns back on.

TO CHANGE TEMPERATURE SETTING:

PRESS TO RAISE

PRESS TO LOWER

DO THIS:

YOU WILL SEE:

Note: The display will show the set

temperature during normal operation, press

either up ( + ) or down ( – ) button to adjust

the set temperature to the desired setting.

The unit will beep twice if the temperature

up ( + ) or down ( – ) button is pressed

continuously when the set temperature

reaches the upper/lower limits 90°F or

60°F.

YOU WILL SEE:

TO USE AUTO FAN FEATURE:

DO THIS:

PRESS FAN BUTTON,

CHOOSE AUTO

TO ADJUST FAN SPEEDS:

DO THIS:

PRESS TO SELECT

10 OPERATING INSTRUCTIONS

Note: Fan starts at High Speed and adjusts

to a slower speed the room temperature

dictates. For example, if the room doesn't

get too warm, it will stay at the slowest

speed. If the room temperature rises quickly,

such as a door being opened, it will

automatically go to the highest speed. The

fan speeds will re-adjust back to the slowest

speed as the room returns to the original set

temperature. Press the fan button to adjust

the fan speed manually.

YOU WILL SEE: COOL FEATURE:

DO THIS:

PRESS MODE

BUTTON

CHOOSE COOL

TO OPERATE ON FAN ONLY:

DO THIS:

PRESS MODE

BUTTON

CHOOSE FAN ONLY

Note: Use this function only when cooling is

not desired, such as for room air circulation

or to exhaust stale air on some models. You

can choose any fan speed you prefer.

(Except “Auto Fan”). During this function,

display will only show the actual room

temperature and the set temperature can

not be changed.

YOU WILL SEE:

Note: In this mode, the fan remains on all the

time with the compressor cycling on and o

when room temperature is reached.

YOU WILL SEE:

DRY FEATURE:

DO THIS:

PRESS MODE

BUTTON

CHOOSE DRY

Note: In this mode, the air conditioner will

work like a dehumidiﬁer, but it will cool the

room down meanwhile. The temperature

can be adjusted between 62 °F (17 °C) and

86 °F (30 °C) and fan speed will be held at

Auto speed.

YOU WILL SEE:

Table of contents

Other Frigidaire Air Conditioner manuals

Frigidaire

Frigidaire LRA257ST211 Owner's manual

Frigidaire

Frigidaire FAK124Q1 User manual

Frigidaire

Frigidaire Home Comfort FRA093PT1 Quick start guide

Frigidaire

Frigidaire FAH106J2T2 User manual

Frigidaire

Frigidaire FRA065AT70 Owner's manual

Frigidaire

Frigidaire FRA08PZU112 User manual

Frigidaire

Frigidaire FFRE08C3Q12 User manual

Frigidaire

Frigidaire LRA157MT1 Owner's manual

Frigidaire

Frigidaire FRA08EZT1 User manual

Frigidaire

Frigidaire FAH086N1 User manual

Frigidaire

Frigidaire FAC104P1A User manual

Frigidaire

Frigidaire FAP094P1Z - 9,000-BTU Portable Air... Quick start guide

Frigidaire

Frigidaire FAC052K7A9 User manual

Frigidaire

Frigidaire GAK085Q7V - GIBSON 8000BTU 115V 6.7A 10.0E3 SPD 4 WAY AIR... User manual

Frigidaire

Frigidaire FAM156R1A 15,100 User manual

Frigidaire

Frigidaire FAA087P7 User manual

Frigidaire

Frigidaire LRA127CT113 User manual

Frigidaire

Frigidaire FAS186N2 User manual

Frigidaire

Frigidaire Home ComfortFRA124HT2 Installation instructions

Frigidaire

Frigidaire Home Comfort FRA106HT2 Installation instructions

Frigidaire

Frigidaire FRS093LS1 Installation instructions

Frigidaire

Frigidaire FAA064N7A3 User manual

Frigidaire

Frigidaire Home ComfortFRA08EHT1 User manual

Frigidaire

Frigidaire LRA074AT7 Owner's manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Samsung

Samsung AS09HM3N user manual

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual

Webasto

Webasto Frigo Top 25 DS Instructions for use

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB operating instructions