Fresca FFT1053CH User manual

INSTALLATION

INSTRUCTIONS

Single hole faucet

Cleaning

Before use: Unscrew the Aerator and allow the water to run freely for 5 minutes. Then screw the filter back in place.

Periodically: Unscrew the Aerator and remove. Rinse it with running water until any loose debris is cleared. Then replace the Aerator

and tighten.

Aerator

FFT1053CH

●

We recommend that this product is installed by a qualified professional contractor.

●

Please check this product immediately to ensure that it has not been damaged and is complete.

●

Please flush the water system to ensure that no debris or any other impurities can enter the taps.

Turn off water supply before commencing work

●Please read these instructions carefully and keep for future reference.

Important

Installation

Dimensions

HANDLE

CARTRIDGE

COVER

CAP

GRUB

SCREW

RETAINING

NUT

CARTRIDGE

FAUCET

SUPPLY LINES

O-RING

RUBBER WASHER

PLASTIC WASHER

FEMALE SCREW

HEAD SCREW

3 7/8″

5 3/4″

3 7/8″

5″

7″

5 1/8″

3 1/4″

Unit:inches

This faucet meets or exceeds the following standards:

ASME A112.18.1/CSA B125.1/NSF61-9

This product has been tested and certified by IAPMO. IAPMO LISTED

To remove the cartridge.

First shut off the water supply to the tap.

1: Pull out the cap from the handle.

2: Loosen the grub screw in handle, but do not remove it.

3: Take off the handle, unscrew the cartridge cover.

4: Unscrew the retaining nut.

5: Pull the cartridge and wash it with clean running water.

6: Dry and lightly grease the seals (only use silicone grease)

Max 1.1″

1: Fit the o-ring into the underside of the faucet.

2: Screw the supply lines into the faucet and fully hand tighten.

3: Pass the tail of supply lines through the hole on the basin from above, and place the faucet in position on the basin, to see if any

alteration to the existing supply pipe work is necessary, make any necessary alterations to the pipe work.

4: Tighten the rubber washer, the plastic washer with the female screw from the underside of the counter.

5: Check that the faucet is correctly positioned, fully tighten the female screw.

6: Connect the water supply pipes to the tail of supply lines with the hot water and cold water.

Other Fresca Plumbing Product manuals

Fresca

Fresca SEVENA FFT3803 User manual

Fresca

Fresca FFT2602CH User manual

Fresca

Fresca FFT3206CH User manual

Fresca

Fresca FFT3801CH User manual

Fresca

Fresca FFT3001CH User manual

Fresca

Fresca FVN3318 User manual

Fresca

Fresca FFT9151CH User manual

Fresca

Fresca FFT1032CH User manual

Fresca

Fresca FFT3502CH User manual

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Viega

Viega Prevista Pure 8512 Instructions for use

Kohler

Kohler Centerset K-15240 Homeowner's guide

Viega

Viega Prevista Dry 8522.33 Instructions for use

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual