Foscam FI9928P User manual

FI9928P

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

English

3 –15

Čeština

16 –28

Slovenčina

29 –41

Magyar

42 –54

Deutsch

55 –68

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Setting Up Your Foscam Security Camera

Getting Started

Package Contents

IP Camera

Power Adapter

Quick Setup Guide

Wi-Fi Antenna

Security Tips

•Please change the camera’s password regularly, using a combination of numbers,

letters and special characters.

•We recommend that you regularly update your camera with the latest available

software and firmware to ensure the best experience with your camera.

Physical Description

Antenna

LENS

Infrared LED

LED

Audio In/Out

Power

Alarm In/Out

Warning:

The cords on this product are a potential strangulation hazard. For child safety, please

keep these cords out of reach of children.

Setting up Your Camera: Wired Connection via the Foscam App

(Recommended)

Before You Get Started

Scan the QR code below to download and install the Foscam APP.

To ensure a smoother video experience on your smart phone, it is recommended that

your smart phone meet the following specifications:

•iOS: version 8.1 or higher.

•Android 4.1 or higher, using a device with a Graphics Processing Unit (GPU).

Note: For the best experience, please update the APP tot the latest version!

SD Card

Reset Button and the Indicator

Wired Connection

1. Please tighten the antenna clockwise and make sure it is in a vertical position.

2. Connect the camera to your router with an Ethernet cable.

3. Plug the power adapter into the camera, and then wait for about 1 minute.

4. Make sure your smart phone is connected to the same WiFi network as the

camera.

Tighten clocwise

Router

Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band-most

newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID:

XXXXX_2.4G.

5. Open the foscam APP and please register a Foscam account, or sign in if you have

one already.

6. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the

upper right corner, then select “Scan the QR code” and scan the QR code that

labeled at the bottom of your camera.

7. There are two options in the following steps, please pay attention to choose the

corresponding adding method.

7.1 Please wait for a few seconds, you can tap “Configure WiFi” in “Configure WiFi”

interface, then select your WiFi network and enter your WiFi’s password. After, you can

set the camera name and tap “Save” in “Set name” interface.

Tap + icon

Select „Scan the

code“

Scan the QR code which is

located at the bottom of your

camera.

Note: It is strongly recommended that you choose to configure WiFi at this step.

7.2 Please wait for a few seconds, you can tap “Configure WiFi” in “Configure WiFi”

interface, then you tap “Skip” in the “WiFi Settings” interface. After, you can set the

camera name and tap “Save” in “Set Name” interface.

Configure WiFi

Select your WiFi Network

and enter your WiFi’s

password

Camera added

successfully and name

hase been set.

Configure WiFi

Tap „Skip“

Camera added successfully and

name has been set.

Note: If the adding process fails, please reset your camera and try adding again

according to the above method.

8. Tapping on the play button in the video box will jump to the “Camera Login”

setting interface. For security, please set a new username and password for your

camera before viewing live video.

9. After completing the above steps, you can begin using your camera.

Note: If you choose installation step 7.2, please refer to the following steps for

configuring WiFi. After setting your WiFi, you can unplug your network cable and the

camera works normally.

Reset Button

Tap

Set a new username and

password.

Configure WiFi

If you selected “Skip” in step 7, click play to enter the camera credential interface > Tap

the “ ” button > tap “WiFi Setting” > select your WiFi network and enter your WiFi’s

password. After setting up successfully, you can view live video without the Ethernal

cable.

Other Ways to Access Your Camera

Foscam VMS

Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with

Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same

time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.

You can download the “Foscam VMS” Windows version from foscam.com/vms, and can

download the “Foscam VMS” Mac version from the APP store:

https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12

Note: For the best experience, please update Foscam VMS to the latest version!

Add the IP Camera

1. Run Foscam VMS, then create a local administrator account and login.

2. Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your

camera.

Please visit foscam.com/downloads to view the user manual and for additional detailed

steps.

Tap

button

Select „WiFi Settings“

Select your WiFi Network

and enter your WiFi’s

password

Other manuals for FI9928P

Table of contents

Languages:

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications