Foscam FI9902P User manual

Security IP Camera FI9902P

User’s guide

To view this guide in other languages (e.g. Nederlands, Deutsch, Français, Español), and

for detailed manuals, tools, etc., please visit foscam.com/downloads.

The product user guide contains product features, how to use, and the operating

procedure. Read the user manual carefully to get the best experience and avoid

unnecessary damage. Keep this manual for future reference.

Strictly comply with applicable laws and regulations at the place of use. The device must

not be used in violation of applicable legislation or for illegal purposes.

The company Alza.cz a.s. bears no responsibility if the device is used in violation of

applicable legislation or for illegal purposes.

Importer: Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, www.alza.cz

Package Contents

IP Camera

Power Adapter

Ethernet Cable

Quick Setup Guide

Wi-Fi Antenna

Security Tips

•Please change the camera's password regularly, using a combination of numbers,

letters and special characters.

•We recommend that you regularly update your camera with the latest available

software and firmware to ensure the best experience with your camera.

Physical Description

Note: FI9800P does not support Micro SD card.

Warning: The cords on this product are a potential strangulation hazard. For child

safety, please keep these cords out of the reach of children.

Setting Up Your Camera: Connection via the Foscam App

(Recommended)

Scan the QR code below to download and install the Foscam APP.

To ensure a smoother video experience on your smart phone, it is recommended that

your smart phone meet the following specifications:

•iOS: version 8.1 or higher.

•Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU).

Note:

For the best experience, please update the APP to the latest version!

Infraded

Lens

Micro SD Card Slot

LAN

Audio in/out

Power

Reset button

Antenna

Wired Connection

1. Please tighten the antenna clockwise and make sure it is in a vertical position.

2. Connect the camera to your router with an Ethernet cable.

3. Plug the power adapter into the camera, and then wait for about 1 minute.

4. Make sure your smart phone is connected to the same WiFi network as the

camera.

Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band—most

newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID:

XXXXX_2.4G.

5. Open the Foscam APP and please register a Foscam account, or sign in if you

have one already.

6. After logging into Foscam APP, select “Tap to add a camera” or "+" icon on the

upper right corner, then select "Scan the QR code" and scan the QR code that

labelled at the bottom of your camera.

Tighten

clockwis

There are two options in the following steps, please pay attention to choose the

corresponding adding method.

7. Please wait for a few seconds, you can tap "Configure WiFi" in "Configure WiFi"

interface, then select your WiFi network and enter your WiFi's password. After,

you can set the camera name and tap “Save” in "Set name" interface.

Note: It is strongly recommended that you choose to configure WiFi at this step.

8. Please wait for a few seconds, you can tap "Configure WiFi" in "Configure WiFi"

interface, then you tap "Skip" in the "WiFi Settings" interface. After, you can set

the camera name and tap “Save” in "Set name" interface.

Note: If the adding process fails, please reset your camera and try adding again

according to the above method.

9. Tapping on the play button in the video box will jump to the “Camera Login”

setting interface. For your security, please set a new username and password for

your camera before viewing live video.

10. After completing the above steps, you can begin using your camera

Note: If you choose installation step 8, please refer to the following steps for configuring

WiFi. After setting your WIFi, you can unplug your network cable and the camera works

normally.

Configure WiFi

If you selected "Skip" in step 8, click play to enter the camera credentials interface > Tap

the “gear” button > tap “WiFi Settings” > select your WiFi network and enter your WiFi’s

password. After setting up successfully, you can view live video without the Ethernet

cable.

Other Ways to Access Your Camera

Foscam VMS

Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with

Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same

time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.

You can download the “Foscam VMS ” Windows version from foscam.com/vms,and can

download the "Foscam VMS" Mac version from the APP store:

https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12

Add the IP Camera

1. Run Foscam VMS, then create a local administrator account and login.

2. Tap the "+" icon on the Foscam VMS and follow the setup wizard to add your

camera.

Please visit foscam.com/downloads to view the user manual and for additional detailed

steps.

Note: For the best experience, please update Foscam VMS to the latest version!

Foscam Cloud Service

You can access the camera via the Foscam Cloud website: https://www.myfoscam.com

Some benefits of viewing your camera in the cloud:

•It’s simple and convenient to remotely access and manage all your WiFi security

cameras.

•Enjoy the latest features first through Foscam Cloud including cloud storage and

more.

•Getting started is fast—if you have already registered an account in the Foscam

App, you can directly use the same login credentials for Foscam Cloud.

Hardware Installation

Point the camera at the desired location and use the screws provided to mount it.

Please Note: Ensure that rain or water will not reach the connector ports at the end of

the pig tail wiring. These connectors are not weather-resistant.

Important Notice

Camera Username & Password

The camera username & password are used to access and manage your camera. Having

a strong password can significantly improve the security of your camera.

If you have forgotten either of them, please press the "Reset" button and hold it for

more than 10 seconds while the camera is powered on. After release the button. The

camera will automatically reboot and the default settings will be restored.

You can then reconnect the camera by following this Quick Setup Guide.

Foscam Cloud Service Account Username & Password

Your Foscam Cloud service account and password may be used to access both the

Foscam App and the Foscam Cloud service website. Therefore, you can register your

account username & password on either one.

Storage Media

Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only

supports FAT-32 format) storage formats. If you wish to record and play back large

amounts of video, we recommend using a Foscam NVR device as well.

Firmware Upgrade

You can upgrade the firmware of your camera with the Foscam App by using the new

"One-Key Online Upgrade" feature (Open the Foscam App and Login to the camera,

select Settings > Firmware Upgrade).

You also can download the latest version to upgrade your camera from our official

website foscam.com/upgrades.

Safety Tips

•Please ensure that the proper power supply is used before using the camera.

•Please install the camera securely using the screws provided.

•Please use this product within the temperature range. When the ambient

temperature is too high or too low, it may cause product failure.

•To avoid the risk of fire or electric shock, please keep your camera connectors in

a cool, dry place.

•Please keep the camera out of reach of small children.

•This product is not a toy; children should use the product under adult

supervision.

•Change your default port to a greater range to help ensure the safety of your

connection. How to change the default port: please visit foscam.com/downloads

to view the user manual.

•Check the logs of your Foscam cameras frequently. Foscam Cameras have

embedded logs reminding telling you which IP addresses are accessing the

camera.

Product Performance

WLAN frequency range: 2412MHz - 2472MHz

Maximum transmission power: < 19dBm

Wireless Standard: IEEE802.11b/g/n (2.4GHz)

Power Supply: DC 12V 1.0A 12W

Technical Support

If you have problems with your Foscam device, please contact the reseller you

purchased from, or you can e-mail the headquarter company headquarters technical

support team: support@foscam.com Your valuable comments and suggestions on

improving Foscam products are welcomed!

WARRANTY CONDITIONS

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you

need repair or other services during the warranty period, contact the product seller

directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for

which the claimed claim may not be recognized:

•Using the product for any purpose other than that for which the product is intended

or failing to follow the instructions for maintenance, operation and service of the

product.

•Damage to the product by a natural disaster, the intervention of an unauthorized

person or mechanically through the fault of the buyer (e.g. during transport, cleaning

by inappropriate means, etc.).

•Natural wear and aging of consumables or components during use (such as

batteries, etc.).

•Exposure to adverse external influences, such as sunlight and other radiation or

electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,

electrostatic discharge voltage (including lightning), faulty supply or input voltage and

inappropriate polarity of this voltage, chemical processes such as used power

supplies, etc.

•If anyone has made modifications, modifications, alterations to the design or

adaptation to change or extend the functions of the product compared to the

purchased design or use of non-original components.

Other manuals for FI9902P

Table of contents

Languages:

Other Foscam Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications