Fluke 562 User manual
PN 4456849
September 2014
©2014 Fluke Corporation. All rights reserved. Specifications are subject to change without
notice. All product names are trademarks of their respective companies.
562/563
Infrared Thermometers
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and work-
manship for two years from the date of purchase. This warranty
does not cover fuses, disposable batteries, or damage from acci-
dent, neglect, misuse, alteration, contamination, or abnormal con-
ditions of operation or handling. Resellers are not authorized to ex-
tend any other warranty on Fluke’s behalf. To obtain service dur-
ing the warranty period, contact your nearest Fluke authorized
service center to obtain return authorization information, then send
the product to that Service Center with a description of the prob-
lem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LI-
ABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CON-
SEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not al-
low the exclusion or limitation of an implied warranty or of inci-
dental or consequential damages, this limitation of liability may not
apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
i
Table of Contents
Title Page
Introduction.......................................................1
Contact Fluke ...................................................1
Safety Information ............................................2
Features ...........................................................6
Display .............................................................7
Menu Overview ................................................7
Save...............................................................8
Light ...............................................................9
Memory..........................................................9
Emissivity Menu .............................................10
°C and °F .......................................................11
Min, Max, Avg, Differential .............................11
Alarm .............................................................12
Trigger Lock ...................................................13
Laser..............................................................13
Setup .............................................................14
Language.....................................................14
Backlight ......................................................14
Time/Date ....................................................15
Delete Data ....................................................16
How the Product Works....................................16
562/563
Users Manual
ii
Product Operation............................................ 17
Temperature Measurement ........................... 17
Find a Hot or Cold Spot ................................. 18
Distance and Spot Size ................................. 18
Field of View .................................................. 19
Emissivity ...................................................... 19
HOLD ............................................................ 20
Data Storage ................................................. 20
External Contact Probe ................................. 21
Troubleshooting............................................. 22
Maintenance .................................................... 23
Battery Charge .............................................. 23
Battery Replacement ..................................... 23
Clean the Lens .............................................. 25
Clean the Case.............................................. 25
Replacement Parts ........................................ 26
Accessories ................................................... 26
Recommended Temperature Probes ............ 26
Specifications................................................... 28
General Specifications................................... 28
KTC Specifications ........................................ 31
1
Introduction
The Fluke 562/563 Infrared Thermometers (the Product) are for
non-contact temperature measurement. The Product determines
the surface temperature of an object by measuring the amount
of infrared energy radiated by the object surface. The Product
also uses a K-type thermocouple for contact temperature
measurement.
Contact Fluke
To contact Fluke, call one of the following telephone numbers:
•Technical Support USA: 1-800-44-FLUKE
(1-800-443-5853)
•Calibration/Repair USA: 1-888-99-FLUKE
(1-888-993-5853)
•Canada: 1-800-36-FLUKE (1-800-363-5853)
•Europe: +31 402-675-200
•Japan: +81-03-6714-3114
•Singapore: +65-738-5566
•Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To see, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
562/563
Users Manual
2
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the
equipment under test.
Figure 1 shows the safety label of the Product. Symbols used on
the Product and in this manual are explained in Table 1.
Warning
To prevent possible electrical shock, fire, eye
damage, and personal injury:
•Read all safety information before you use
the Product.
•Do not look directly into the laser with optical
tools (for example, binoculars, telescopes,
microscopes). Optical tools can focus the
laser and be dangerous to the eye.
•Do not look into the laser. Do not point laser
directly at persons or animals or indirectly off
reflective surfaces.
•Do not use laser viewing glasses as laser
protection glasses. Laser viewing glasses are
used only for better visibility of the laser in
bright light.
•Do not open the Product. The laser beam is
dangerous to eyes.
•Have the Product repaired only through an
approved technical site.
Infrared Thermometers
Safety Information
3
•Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
•The battery door must be closed and locked
before you operate the Product.
•Do not use the Product if it operates
incorrectly.
•Do not use the Product around explosive gas,
vapor, or in damp or wet environments.
•Do not connect the optional external probe to
live electrical circuits.
•See emissivity information for actual
temperatures. Reflective objects result in
lower than actual temperature measurements.
These objects pose a burn hazard.
•Do not leave the thermometer on or near
objects of high temperature.
•Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
laser radiation exposure.
•Use the Product only as specified, or the
protection supplied by the Product can be
compromised.
562/563
Users Manual
4
Caution
To avoid damage to the Product or the equipment
under test, protect them from:
•EMF (electro-magnetic fields) from arc
welders, induction heaters, etc.
•Static electricity
•Thermal shock (caused by large or abrupt
ambient temperature changes. For highest
accuracy, allow 30 minutes for Thermometer
to become stable before use).
Laser
Aperture
SPOT SIZE (S)@ DISTANCE (D)
1.7@60 0.7@36 0.8@12
Inch
42@1500 18@900 19@300
mm
D:S = 50:1
••••••••••
Figure 1. Laser Safety Markings
Infrared Thermometers
Safety Information
5
Table 1. Symbols
Symbol Explanation
Hazardous voltage. Risk of electrical shock.
Risk of danger. Important information. See
manual.
Warning. Laser.
Conforms to European Union directives.
°C Celsius
°F Fahrenheit
Battery
This product complies with the WEEE Directive
(2002/96/EC) marking requirements. The
affixed label indicates that you must not discard
this electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as
category 9 "Monitoring and Control
Instrumentation” product. Do not dispose of this
product as unsorted municipal waste. Go to
Fluke’s website for recycling information.
Battery
Conforms to China Metrology Certification.
562/563
Users Manual
6
Features
•Single-spot laser sighting
•Backlight display
•Current Temperature plus MAX, MIN, DIF, AVG
temperature displays
•Two AA batteries
•Hard case
•80PK-1 K-type thermocouple probe
•Adjustable emissivity and predefined emissivity table
•Infrared and thermocouple temperature display
•Celsius or Fahrenheit temperature display
•Tripod mount
•Auto off
•Standard miniature K-type thermocouple connector input
•Printed 562/563 Users Manual
•12 or 24 hour clock
•Last reading Hold (20 seconds)
•Multi-language interface
•High and low alarm
•Data storage and review
•Trigger lock
This manual suits for next models
1
Table of contents
Other Fluke Thermometer manuals
Fluke
Fluke 1504 User manual
Fluke
Fluke Comark C20 Series User manual
Fluke
Fluke 64 max User manual
Fluke
Fluke 54 Series II User manual
Fluke
Fluke Fluke-61 User manual
Fluke
Fluke 572 User manual
Fluke
Fluke 1521 User manual
Fluke
Fluke 50S User manual
Fluke
Fluke 5624 User manual
Fluke
Fluke Comark C21 User manual
Fluke
Fluke 51-54 Series II Operating and safety instructions
Fluke
Fluke 54 Series II User manual
Fluke
Fluke 568 User manual
Fluke
Fluke 561 HVACPro User manual
Fluke
Fluke 1502A User manual
Fluke
Fluke 63 User manual
Fluke
Fluke VT02 User manual
Fluke
Fluke 65 User manual
Fluke
Fluke 62 MAX User manual
Fluke
Fluke 1551A Ex Use and care manual
