Fluke 62 MAX User manual

PN 4060712

April 2012 Rev. 1, 11/12

Specifications are subject to change without notice.

All product names are trademarks of their respective companies.

62 MAX/62 MAX +

Infrared Thermometer

Users Manual

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for three

years from the date of purchase. This warranty does not cover fuses, disposable

batteries, or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to

extend any other warranty on Fluke’s behalf. To obtain service during the warranty

period, contact your nearest Fluke authorized service center to obtain return

authorization information, then send the product to that Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH

AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED.

FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the exclusion or limitation of

an implied warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

Table of Contents

Title Page

Introduction.................................................................................................................1

How to Contact Fluke .................................................................................................1

Safety Information ......................................................................................................2

Maintenance...............................................................................................................6

How to Change the Battery ....................................................................................6

How to Clean the Product ......................................................................................6

Specifications .............................................................................................................7

Standards and Agency Approval................................................................................9

The Product ................................................................................................................10

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

Introduction

The Fluke 62 MAX and 62 MAX + Infrared Thermometers (the Product) can determine the

surface temperature by measuring the amount of infrared energy radiated by the target’s

surface. Note that the Japanese models indicate Celsius only.

Warning

Read all safety information before you use the Product.

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

62 MAX/62 MAX +

Users Manual

Safety Information

A Warning identifies conditions and procedures that are dangerous to the user. A Caution

identifies conditions and procedures that can cause damage to the Product or the equipment

under test.

Table 1 tells you about symbols used on the Product and in this manual.

Warning

To prevent eye damage and personal injury:

•Read all safety Information before you use the Product.

•Do not use the Product if it operates incorrectly.

•Use the Product only as specified, or the protection supplied by the

Product can be compromised.

•Before you use the Product, inspect the case. Do not use the Product if it

appears damaged. Look for cracks or missing plastic.

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

Infrared Thermometer

Safety Information

•See emissivity information for actual temperatures. Reflective objects

result in lower than actual temperature measurements. These objects

pose a burn hazard.

•Do not look directly into the laser with optical tools (for example,

binoculars, telescopes, microscopes). Optical tools can focus the laser

and be dangerous to the eye.

•Do not look into the laser. Do not point laser directly at persons or

animals or indirectly off reflective surfaces.

•Replace the batteries when the low battery indicator shows to prevent

incorrect measurements.

•Do not use the Product around explosive gas, vapor, or in damp or wet

environments.

•Use the Product only as specified or hazardous laser radiation exposure

can occur.

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

62 MAX/62 MAX +

Users Manual

Table 1. Symbols

Symbol Meaning Symbol Meaning

Risk of danger. Important

information. See Manual. 

This product complies with the

WEEE Directive (2002/96/EC)

marking requirements. The

affixed label indicates that you

must not discard this

electrical/electronic product in

domestic household waste.

Product Category: With

reference to the equipment types

in the WEEE Directive Annex I,

this product is classed as

category 9 "Monitoring and

Control Instrumentation” product.

Do not dispose of this product as

unsorted municipal waste. Go to

Fluke’s website for recycling

information.

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

Infrared Thermometer

Safety Information

Table 1. Symbols (cont.)

Symbol Meaning Symbol Meaning

Warning. Laser. Conforms to European Union

directives.

Battery Conforms to relevant Australian

standards.

Conforms to China Metrology Certification

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

62 MAX/62 MAX +

Users Manual

Maintenance

Caution

To avoid damage to the Product, do not leave the thermometer on or near

objects of high temperature.

How to Change the Battery

To install or change the AA IEC LR06 battery, open the battery compartment and replace the

battery as shown in Figure 16.

How to Clean the Product

Use soap and water on a damp sponge or soft cloth to clean the Product case. Carefully wipe

the surface with a moist cotton swab. The swab may be moistened with water. See Figure 17.

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

Infrared Thermometer

Specifications

62 MAX 62 MAX +

Temperature Range -30 °C to 500 °C

(-22 °F to 932 °F)

-30 °C to 650 °C

(-22 °F to 1202 °F)

Accuracy

(Calibration geometry with

ambient temperature 23 °C

±2 °C)

≥0 °C: ±1.5 °C or ±1.5 % of

reading, whichever is

greater

(≥32 °F: ±3 °F or ±1.5 % of

reading, whichever is

greater)

≥-10 °C to <0 °C: ±2 °C

(≥14 °F to <32 °F: ±4 °F)

< -10 °C: ±3 °C

(<14 °F: ±6 °F)

≥0 °C: ±1 °C or ±1 % of

reading, whichever is

greater (≥32 °F: ±2 °F or

±1 % of reading, whichever

is greater)

≥-10 °C to <0 °C: ±2 °C

(≥14 °F to <32 °F: ±4 °F)

< -10 °C: ±3 °C

(<14 °F: ±6 °F)

Response Time (95 %) <500 ms (95 % of reading) <300 ms (95 % of reading)

Spectral Response 8 to 14 microns

Emissivity 0.10 to 1.00

Temperature Coefficient ±0.1 °C/°C or ±0.1 %/°C of reading (whichever is greater)

1.888.610.7664info@Fluke-Direct.com Fluke-Direct.com

Other manuals for 62 MAX

This manual suits for next models

Table of contents

Popular Thermometer manuals by other brands

Delton

Delton 981A instruction manual

Baker

Baker MM2P instruction manual

Tarmo

Tarmo 320281 manual

Citizen

Citizen CTD 504 instruction manual

TFA

TFA 14.1500 instruction manual

Vive

Vive DMD1010 user manual

Gotemp

Gotemp THB4002 user guide

GREISINGER

GREISINGER G 1202 Quick reference guide

Amprobe

Amprobe TMD-53W user manual

Trotec

Trotec BP10 operating manual

Radiance instruments

Radiance instruments RT616 Series product manual

Eurolec

Eurolec IR151 operating instructions

Scaneo

Scaneo TS42B instruction manual

Sper scientific

Sper scientific 800043 instruction manual

Microlife

Microlife NC 200 Operating instructions manual

Motorola

Motorola MBP69SN General questions

The MeatStick

The MeatStick The MeatStick quick start guide

Hama

Hama TH35-A operating instructions