Extech Instruments ET60 User manual

ET60-en-US_V1.1 03/22

User Manual

Model ET60

Voltage/Continuity Tester

Introduction

The ET60 is an AC/DC Voltage tester with continuity check, NCV

detector and a work light. The attached test leads are connected

with 24” of 18-gauge wire rated at 600V. The 6” test lead

handles include spring loaded protective tip sleeves.

AC/DC Voltage

Always test on a known live circuit before use.

To check for voltage, insert test leads into outlet or carefully touch test leads

to the electrical contacts or circuit to be tested. If voltage is present, the LED

indicators will illuminate in the correct range.

Use the highest illuminated range to determine the correct voltage. If the

readings are greater than 120VAC or 48VDC, the meter will vibrate.

Non-Contact Voltage (NCV)

Always test on a known live circuit before use.

To check for non-contact voltage, place the meter near a source of electrical

energy. Press the ON/OFF button to measure NCV voltage. Note that the tip of

the meter offers the highest sensitivity. If voltage is present, the LED

indicators will illuminate.

Continuity

WARNING: To avoid electric shock, never measure continuity on circuits

that have voltage on them.

Touch the test leads to the circuit under test. The bulb at the top of the

meter will illuminate if there is continuity.

Worklight

Press the ON/OFF button to activate the work light and to measure NCV.

WARNINGS:

•Risk of Electric Shock. Always check proper operation on a known live circuit

before using.

•Never ground yourself when making electrical measurements.

•Do not use outside of rated voltages.

•Do not use in wet weather.

CAUTION: Use extreme caution when checking electrical circuits to avoid

injury due to electrical shock. FLIR Systems, Inc. assumes basic knowledge of

electricity on the part of the user and is not responsible for any injury or

damages due to improper use of this tester.

ET60-en-US_V1.1 03/22

SPECIFICATIONS

Non-Contact Voltage Range: 90~1000 volts AC

DC Voltage Range: 7 LED indicators from 6~220 volts

AC Voltage Range: 7 LED indicators from 24~600 volts

AC Voltage Frequency: 45~66 Hz

Power: Two 1.5V AAA batteries

Operating Temp.: 32~122°F (0~50°C)

Operating Humidity: 70% RH Max

Use clean, dry cloth to clean

OVERVOLTAGE CATEGORY III

Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.

Note –Examples include switches in the fixed installation and some

equipment for industrial use with permanent connection to the fixed

installation.

Double Insulation: The meter is protected by double insulation or

reinforced insulation.

File No. 3160913

ISO-9001 Certified

www.extech.com

Table of contents

Other Extech Instruments Test Equipment manuals

Extech Instruments

Extech Instruments ET15 User manual

Extech Instruments

Extech Instruments MG325 User manual

Extech Instruments

Extech Instruments 382252 User manual

Extech Instruments

Extech Instruments 480303 User manual

Extech Instruments

Extech Instruments 381285 User manual

Extech Instruments

Extech Instruments 480400 User manual

Extech Instruments

Extech Instruments 382357 User manual

Extech Instruments

Extech Instruments VT30 User manual

Extech Instruments

Extech Instruments ExStik PH150-C User manual

Extech Instruments

Extech Instruments MG320-NIST User manual

Extech Instruments

Extech Instruments CB10 User manual

Extech Instruments

Extech Instruments 380353 User manual

Extech Instruments

Extech Instruments 407744 User manual

Extech Instruments

Extech Instruments PRC50 User manual

Extech Instruments

Extech Instruments 412300 User manual

Extech Instruments

Extech Instruments ET10 User manual

Extech Instruments

Extech Instruments MS6100 User manual

Extech Instruments

Extech Instruments ET30B User manual

Extech Instruments

Extech Instruments HDV700 User manual

Extech Instruments

Extech Instruments 412300 User manual

Extech Instruments

Extech Instruments BR90 User manual

Extech Instruments

Extech Instruments ExStik CL200 User manual

Extech Instruments

Extech Instruments PRC15 User manual

Extech Instruments

Extech Instruments TK36 User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual