Extech Instruments 480400 User manual

User's Guide

Phase Sequence Tester

Model 480400

www.ponpe.com

contact:

[email protected]

480400‐en‐EU_V3.39/14

Introduction

Congratulations on your purchase of the Extech Model 408400 Phase Sequence Tester. This

handheld instrument detects the phase sequence of three-phase systems. Color-coded test leads

are provided for connecting to the three mains phases of the system under test. This meter is

shipped fully tested and calibrated and, with proper use, will provide years of reliable service.

Safety

International Safety Symbols

!Caution ! Refer to the explanation in this Manual

Caution ! Risk of electric shock

Earth (Ground)

Double Insulation or Reinforced insulation

AC, Alternating Current or Voltage

DC, Direct Current or Voltage

Safety Procedures

To avoid possible electric shock or fire, observe the following:

Read the following information carefully before using or servicing the instrument.

Adhere to local and national safety codes.

Individual protective equipment must be used to prevent shock and injury.

Use of instrument in a manner not specified by the manufacturer may impair safety

features/protection provided by the equipment.

Avoid working alone.

Inspect the test leads for damaged insulation or exposed metal. Check test lead continuity.

Damaged leads must be replaced. Do not use the phase Rotation indicator if it appears

damaged.

Use care when working above 30V ac rms, 42V ac peak and 60V dc. Such voltages pose a

shock hazard.

When using the probes, keep fingers away from probe contacts. Keep fingers behind the finger

guards on the probes.

Measurements can be adversely affected by impedances of additional operating circuits

connected in parallel or by transient currents.

Verify operation prior to measuring hazardous voltages (voltages above 30V ac rms, 42V ac

peak and 60V dc).

Do not use the phase Rotation indicator with any of the parts removed.

Do not use the phase Rotation indicator around explosive gas, vapor, or dust.

Do not use the meter in a wet environment.

www.ponpe.com

contact:

[email protected]

480400‐en‐EU_V3.39/14

Description

Meter Description

1. Test Lead alligator clips

2. Test lead input jacks

3. L1, L2, L3 display icons

4. Clockwise Rotation LCD Indicator R (right) and L (left)

icons

5. Sequence grid

Display Description

1. Line designators (L1, L2, and L3)

2. Color codes for test leads

3. Clockwise / Counter-Clockwise indicator

4. LEFT (L) or RIGHT (R) rotation direction

5. Phase Sequence grid

www.ponpe.com

contact:

[email protected]

480400‐en‐EU_V3.39/14

Operation

Determine Phase Rotation Direction

1. Connect the supplied color-coded test leads to the meter’s test lead input jacks at the top of the

meter.

2. Connect the test probes to the three mains phases for the system under test.

3. L1, L2, and L3 indicators will illuminate one at a time on the meter’s LCD display as each phase

is connected.

4. The clockwise and counter-clockwise arrows with the left/right ‘L’ or ‘R’ icons display the phase

rotation direction of the device under test.

5. The sequence grid simply shows the three line sequences for Clockwise ‘R’ and the three line

sequences for Counter-Clockwise ‘L’.

Note: The rotational arrow indicators illuminate even if one of the test probes is connected to a

neutral or ground conductor instead of one of the mains phases.

Specifications

Nominal Voltage 40 to 600 VAC

Frequency Range (fn) 15 to 400HZ

Current pickup 1 mA

Nominal Test current (in per phase) 1 mA

Maximum Operating Voltage (Ume) 600 V

Operating Temperature 0 to 40oC (32 to 104oF)

Type of protection IP 40

Dimensions (H x W x D): 130 x69 x 32mm (5.1 x 2.7 x 1.3”)

Weight 130g (4.6 oz.)

Approvals CE (EU directives)

Safety For indoor use and in accordance with the requirements for double

insulation to IEC1010-1 (1995): EN61010-1 (1995) Overvoltage Category III

600V, Pollution Degree 2.

Allrightsreservedincludingtherightofreproductioninwholeorinpartinanyform

ISO‐9001Certified

www.extech.com

www.ponpe.com

contact:

[email protected]

Table of contents

Other Extech Instruments Test Equipment manuals

Extech Instruments

Extech Instruments HDV600 User manual

Extech Instruments

Extech Instruments 407744 User manual

Extech Instruments

Extech Instruments 480303 User manual

Extech Instruments

Extech Instruments HDV700 User manual

Extech Instruments

Extech Instruments PRC50 User manual

Extech Instruments

Extech Instruments 381285 User manual

Extech Instruments

Extech Instruments 382356 User manual

Extech Instruments

Extech Instruments RT30 User manual

Extech Instruments

Extech Instruments ET25 User manual

Extech Instruments

Extech Instruments CB10 User manual

Extech Instruments

Extech Instruments ET10 User manual

Extech Instruments

Extech Instruments 412300A User manual

Extech Instruments

Extech Instruments 7630 User manual

Extech Instruments

Extech Instruments 433201 User manual

Extech Instruments

Extech Instruments ET26B User manual

Extech Instruments

Extech Instruments ET40 User manual

Extech Instruments

Extech Instruments ET26B User manual

Extech Instruments

Extech Instruments BR146 User manual

Extech Instruments

Extech Instruments prc20 User manual

Extech Instruments

Extech Instruments 422123 User manual

Extech Instruments

Extech Instruments 412300 User manual

Extech Instruments

Extech Instruments CG304 User manual

Extech Instruments

Extech Instruments 380366 User manual

Extech Instruments

Extech Instruments ET15 User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual