EverFocus EZ350 User manual

EVERFOCUS

1/3” 560 TVL Bullet Style

Weatherproof Color Camera

Operation Instructions

Model No. EZ350

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1. Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers since the magnetic fields generate from above devices will distort the video

images.

2. Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3. Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4. Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5. Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

6. Cleaning

Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from

the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the

camera lens.

7. Do not operate the camera beyond the specified temperature, humidity or

power source ratings.

Use the camera at temperatures within -40℃~ 50℃(-40℉ to 122℉) and humidity

between 20%~ 80%. The input power source is 12VDC/24VAC.

PREFACE

This 1/3”image format color CCD camera offers brilliant performance, as it is ideal for

outdoor applications such as parking lots, gas stations or shopping malls. The sophisticated

circuit design provides a heater that turns on at 10℃for cold weather. The camera will

provide protection against the elements and provide an excellent quality picture.

FEATURES

1/3” SONY Super HAD CCD with low light sensitivity of 0.5 lux/F=1.2

Industry leading super high-res. with 560 TVL

Revolutionary integrated 10-bit Digital Signal Processor (DSP) delivers excellent picture

quality and sharp color images

Intelligent backlight compensation with On/Off switch

Camera can be operated in extreme low temperature -40℃/ -40℉

Removable sun shield

IP66 Weatherproof rated

PACKAGE CONTENTS

¾Camera Unit x 1

¾Desiccant Pack x 1

¾Mounting Bracket x 1

¾Sunshield x 1

¾Power Adaptor Cable x 1

¾Accessory pack includes:

-Screws x 3

-Expanding Screws x 3

¾Manual x 1

SPECIFICATIONS

Pickup Device 1/3'' SONY Super HAD CCD

Video Format NTSC or PAL

Scanning System NTSC: 525 TV lines, 60 fields/sec

PAL: 625 TV lines, 50 fields/sec

Picture Elements 768 x 494(NTSC) ; 752 x 582(PAL)

Horizontal Resolution 560TVL

Sensitivity 0.5Lux/F=1.2

S/N Ratio Over 48dB(AGC off)

Electronic Shutter 1/50(1/60)~1/100,000

Lens Type

Vari-focal lens, Auto Iris

f=3.8~9.5mm/F=1.2 , f=9~22mm/F=1.6

*Lens models and availability vary in different regions

Back Light Comp. ON/OFF Switch

Auto Gain Control ON/OFF Switch

Flickerless ON/OFF Switch

Auto White Balance Yes

Gamma Correction 0.45

Video Output BNC 1.0Vp-p , 75ohm

Sync. Mode Line Lock/Internal Sync

Heater Yes, built-in

Weatherproof IP66

Power Source 12VDC/24VAC

Power Consumption

24VAC: 6VA max. (Heater OFF)

24VAC: 12.5VA max. (Heater ON)

12VDC: 4W max. (Heater OFF)

12VDC: 7.5W max. (Heater ON)

Dimensions

With sun shield : 90.7 mm(W) x 70mm(H) x 172mm(L);

3.57”(W) x 2.8"(H) x 6.8"(L)

Without sun shield: 132mm(L) x 57mm(O.D);

5.2"(L) x 2.2"(O.D)

Weight 0.71 kg ; 1.6 lbs

0.91 kg ; 2 lbs (with bracket)

Operating Temperature -40°C~50°C ; -40°F~122°F (20%~80% Humidity)

Heater Activation Temp: Yes, 10°C On / 20°C Off

Certifications FCC/CE

DIMENSIONS

MAJOR PARTS NAME & THEIR FUNCTIONS

Mounting

Base

Swivel

Screw

Assembly

Screw

Sun Shield

Cover

Back Fixing Plate

Mounting

Base

Swivel

Screw

Assembly

Screw

Sun Shield

Cover

Back Fixing Plate

Fixing Screw Front

Fixing Plate

Fixing Screw Front

Fixing Plate

Mounting Bracket

O-ring Seal

Heater

Lens

Focus Zoom

IRIS ALC/Level Adjustment

Control Switch Mounting Bracket

O-ring Seal

Heater

Lens

Focus Zoom

IRIS ALC/Level Adjustment

Control Switch

INSTALLATION

1. Using the supplied screws, mount the bracket base on the desired location.

2. Connect the BNC connector of the camera to a monitor or other video device through a 75 ohm

type coaxial cable with BNC female connector at cable extension.

3. Connect the 24VAC or 12VDC regulated power source of the camera (power jack) to the

power-in jack with 2mm plug. For 12VDC power source, please make sure the power plug is

center+ outer- for heater normal operation.

4. If the factory settings are out of focus, or any other adjustment is required, follow the

procedures below.

a. Remove the fixing screw in the front, which hold the sun shield cover. Remove the sun

shield cover.

b. Twist open and carefully remove the housing cover.

(Please pay attention to prevent damage to the “O”-Ring seal.)

c. Loosen the focal lens and focus locking screws.

d. Adjust the lens to bring the subject into focus.

(Caution: Heater elements could be hot! When camera power is on, be cautious with camera

adjustment.)

e. Retighten the screws.

f. Please refer to the Settings section for the details of the other adjustments. Adjust accordingly

if necessary.

g. When all the adjustments and settings are completed, overlaying the cover gently. Be careful

not to damage to the “O”-Ring and camera components.

h. To reassemble the sun shield, match the hole on the sun shield to the back fixing plate of

camera, fix the screw on the front fixing plate. Make sure the wider side of the fixing plate

holds the edge of the camera well.

5. Attach the camera onto the mounting bracket.

6. Loosen the swivel screw and point the camera to the desired direction.

7. Tighten the swivel screw. To strengthen the fixing power of the swivel screw, tighten the

set-screw with the set-screw wrench (supplied).

Notes:

(A) Make wiring connections only when it is determined that power is in a disconnected

status.

(B) There is a desiccant pack attached to the housing base under the camera which is

designed to absorb any moisture trapped inside the housing during adjustment. To

avoid excessive moisture build up, it is recommended to avoid rainy or excessively

damp conditions during installation of camera. It is also advisable to limit the

frequency of removing the housing cover. The desiccant pack can be replaced if

condensation develops inside the housing.

SETTINGS

The camera is set up at factory and normally requires no adjustments. However, adjustments

may be necessary in some cases. Please refer to the following description for the function details.

The IRIS ALC and IRIS Level adjustments are located on the side circuit board, use a

screwdriver to adjust if it is necessary.

IRIS Level Adjustment

To adjust iris level –

Turn the IRIS Level Adjustment VR counterclockwise to get darker picture.

Turn the IRIS level adjustment VR clockwise to get brighter picture.

IRIS ALC Adjustment

To select light metering method –

Turn the IRIS ALC Adjustment VR counterclockwise for Average Metering.

Turn the IRIS ALC Adjustment VR clockwise for Peak Metering.

IRIS ALC

Adjustment

IRIS Level

Adjustment

DIP Switch

The 4 DIP switch also locate on the side circuit board, they are Flickerless, Back Light Comp,

Auto Gain Control and Line Lock accordingly.

FL(Flickerless) ON/OFF

When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electronic

shutter at 1/100(NTSC) or 1/120(PAL) automatically, and reduce the flicker immediately. The

default setting is Off.

BLC (Back Light Compensation) ON/OFF

When BLC is turned on, the AGC, ES and IRIS operating points are determined by averaging

over the center area instead of entire field-of-view, so that foreground object at center area can be

clearly distinguished from brightly backgrounds.

BLC should not be used unless it is needed to compensate for strong backlight. The default setting

is Off.

AGC (Automatic Gain Control) Off/On

AGC ON: The sensitivity increases automatically when light is low.

AGC OFF: A-low-noise picture is obtained under a low light condition.

The default setting is ON.

LL(Line-Lock) Off/On

To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on).

Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock on,

the camera’s vertical synchronization can be driven by the AC signal in the power lines.

The default setting is Off.

Note: Line-Lock sync mode operation is working only when used with an AC power source; it is

not working with a DC power source.

FL Normal On

BLC Normal On

AGC Off

LL Off

Control Switches

DIP switch

SIMPLE INSTRUCTIONS FOR THE DESICCANT PACK

Due to the camera lens blurred from the humidity inside the camera. The desiccant pack is

therefore attached to absorb the humidity. Easy instruction is as follow:

Adjust all settings first and place the desiccant pack into the gap of the machine and fix it.

Install the cover and overlaying gently.

Installation steps:

Step1.

Step2.

Desiccant pack

Install the cover and

overlaying gently

EverFocus Electronics Corp.

Head Office:

12F, No.79 Sec. 1 Shin-Tai Wu Road,

Hsi-Chih, Taipei, Taiwan

TEL: +886-2-26982334

FAX: +886-2-26982380

www.everfocus.com.tw

USA L.A. Office:

1801 Highland Ave. Unit A

Duarte, CA 91010, U.S.A.

TEL: +1-626-844-8888

FAX: +1-626-844-8838

www.everfocus.com

USA N.Y. Office:

415 Oser Avenue Unit S

Hauppauge, NY 11788

TEL: 631-436-5070

FAX: 631-436-5027

www.everfocus.com

our EverFocus product is desi

ned and

manufactured with high quality materials and

components which can be recycled and

reused.

This symbol means that electrical and

electronic equipment, at their end-of-life,

should be disposed of separately from your

household waste.

Please, dispose of this equipment at your

local community waste collection/recycling

centre.

In the European Union there are separate

collection systems for used electrical and

electronic product.

Please, help us to conserve the environment

we live in!

Ihr EverFocus Produkt wurde entwickelt und

hergestellt mit qualitativ hochwertigen

Materialien und Komponenten, die recycelt

und wieder verwendet werden können.

Dieses Symbol bedeutet, dass elektrische und

elektronische Geräte am Ende ihrer

Nutzungsdauer vom Hausmüll getrennt

entsorgt werden sollen.

Bitte entsorgen Sie dieses Gerät bei Ihrer

örtlichen kommunalen Sammelstelle oder im

Recycling Centre.

Helfen Sie uns bitte, die Umwelt zu erhalten, in

der wir leben!

P/N: MZ35G00600_Ver.C

Europe Office:

Albert-Einstein-Strasse 1

D-46446 Emmerich, Germany

TEL: 49-2822-9394-0

www.everfocus.de

China Office:

Room 609, Technology Trade Building,

Shangdi Information Industry Base, Haidian

District, Beijing,China 10085

TEL: +86-10-62973336/37/38/39

FAX: +86-10-62971423

www.everfocus.com.cn

Japan Office:

1809 WBG MARIBU East 18F,

2-6 Nakase.Mihama-ku.

Chiba city 261-7118, Japan

TEL: +81-43-212-8188

FAX: +81-43-297-0081

www.everfocus.com

Other manuals for EZ350

Table of contents

Other EverFocus Security Camera manuals

EverFocus

EverFocus EHD300N User manual

EverFocus

EverFocus ECMD100i Technical manual

EverFocus

EverFocus ED610 User manual

EverFocus

EverFocus EPTZ3600 User manual

EverFocus

EverFocus EPN4230d User manual

EverFocus

EverFocus EZA2880 eZ.HD Series User manual

EverFocus

EverFocus ED100 Series User manual

EverFocus

EverFocus ED310e User manual

EverFocus

EverFocus EBH5102 User manual

EverFocus

EverFocus ED640 Owner's manual

EverFocus

EverFocus EHD935 eZ.HD Series User manual

EverFocus

EverFocus 630 TVL User manual

EverFocus

EverFocus EZ180 User manual

EverFocus

EverFocus EXZ330e User manual

EverFocus

EverFocus EMD990F User manual

EverFocus

EverFocus EHD525EX User manual

EverFocus

EverFocus Stainless Steel Series User manual

EverFocus

EverFocus EHA1280 eZ.HD Series User manual

EverFocus

EverFocus EHH5200 User manual

EverFocus

EverFocus EBD935F eZ.HD Series User manual

EverFocus

EverFocus EPTZ2700 User manual

EverFocus

EverFocus eZ.HD EBD930F User manual

EverFocus

EverFocus ECD230/N3W User manual

EverFocus

EverFocus EMD935F User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications