Eneo VKC-900IR36 Installation instructions
Full Manual
1/3" Camera, Day&Night, 900TVL,
Infrared, 12VDC
VKC-900IR36
VKC-900IR2812
EN
1
DE
EN
Notes on safety .................................................................................................2
Overview .............................................................................................................2
Introduction ................................................................................................................................. 2
Functions and Features ............................................................................................................ 2
Hardware Connection ........................................................................................3
Power and Video Cables.......................................................................................................... 3
Function Keys ............................................................................................................................. 3
Device Dimensions ............................................................................................5
Components and Functional Description ........................................................6
Device Installation..............................................................................................7
Function Menus..................................................................................................9
OSD Main Menu......................................................................................................................... 9
Image Setting Menu .................................................................................................................. 9
Advanced Setup Menu ...........................................................................................................10
Technical Specifications..................................................................................12
Further information .........................................................................................14
2
Notes on safety
Please also pay attention to the enclosed safety instructions, and carefully read
through this instruction guide before initial operation.
Important points of advice are marked with a caution symbol.
Overview
Introduction
The product is a 900 TVL infrared bullet camera that uses a SONY 1/3“Exmor
CMOS image sensor which can capture high-quality and high-resolution images.
Functions and Features
• High sensitivity: The camera uses a SONY 1/3“Exmor CMOS image sensor
and has an illumination as low as 0.01 Lux. When infrared-ray (IR) LEDs are on,
the illumination can reach 0 Lux.
• On-screen display (OSD) menus: The camera provides OSD menus that sup-
port six languages, facilitating commissioning and setting camera parameters.
• Digital noise reduction (DNR): The camera uses 3D DNR technology that signi-
ficantly optimizes images in low-illumination environments by improving signal to
noise ratio (SNR).
• High resolution: The horizontal resolution is up to 900 TVL, which makes the
image clear and fine.
• Privacy masking: The camera allows you to define a maximum of 8 quadrilate-
ral mask areas, which meets privacy requirements.
• Built-in mobile optical filter (optional)
• Intelligent IR technology: The intelligent IR technology enables the camera to
adjust shutter, aperture, and gain depending on image brightness in black and
white mode, optimizing the infrared effect and preventing center overexposure.
• Built-in efficient IR-emitting tubes: With the built-in tubes, the camera can cap-
ture quality images even in total darkness and the nighttime.
3
DE
EN
Hardware Connection
Power and Video Cables
Figure 2-1 shows the power and video cables.
Power and video cables
Connect the BNC connector of the power or video cable to a video signal cable and
connect the other connector to a low-voltage power cable (12 V DC). After installing
the camera, directly connect the video cable and power cable.
The BNC video output interface is used to emit composite video signals. Monitors
with a resolution of higher than 800 TVL are recommended.
Function Keys
A user can call OSD main menus through multi function switch control keys, and
check and set camera parameters.
Figure 2-2 shows the camera function keys.
OSD menu control key: It is used to enter OSD menus or select menu items when
you press this key in the middle of the multi function switch.
Figure 2-1
Figure 2-2
4
UP/DOWN keys: The UP and DOWN keys are used to select menu items upwards
and downwards by prodding the multi function switch upwards and downwards.
LEFT/RIGHT keys: The LEFT and RIGHT keys are used to select menu items hori-
zontally or modify parameters by prodding the multi function switch towards the left
or the right.
When you prod the multi function switch upwards and downwards, the menu items
rapidly roll upwards and downwards accordingly; and when you prod the multi func-
tion switch towards the left or the right, the parameter values will rapidly decrease or
increase.
5
DE
EN
Device Dimensions
Figure 3-1 shows the camera dimensions.
Dimensions (unit: mm)
Figure 3-1
6
Components and Functional Description
Figure 4-1 shows the components of the camera.
Camera components
Figure 4-1
7
DE
EN
Device Installation
1. Open a package, take out the camera, and unscrew the camera shell, as
show in Figure 5-1. Unscrew the camera shell
2. Take out the positioning label delivered with the camera and drill three holes
with diameter of 5.5mm on the ceiling or wall based on the marks on the positi-
oning label, nail swell plastic buttons into drilled holes, as shown in Figure 5-2.
Stick the positioning label
3. Connect the multi-connector cable and fix the camera to the ceiling(or wall)
by use of self-tapping screws.
4. Loosen the direction focusing screw, position left-right up/down to adjust
the angle of the camera that the camera faces the monitored area, then fix the
direction focusing screw, as shown in Figure 5-3.
Adjust the camera direction.
Figure 5-1
Figure 5-2
Figure 5-3
8
5. Adjust view angle and focal length by using an adjusting tool, as shown in
Figure 5-4.
View angle and focal length adjustment
6. Fix the camera shell, as shown in Figure 5-5.
Fix the camera shell
Figure 5-4
Figure 5-5
9
DE
EN
Function Menus
OSD Main Menu
When you press the multi function switch control key downward, the OSD main
menu MAIN MENU appears, as shown in Figure 6-1. The OSD main menu provides
function options such as LANGUAGE, VIDEO SYSTEM, PICTURE ADJUST, AD-
VANCE SETUP, RESET CAMERA, VERSION NO·, SAVE &EXIT, and EXIT.
OSD main menu
The table describes the function options on the OSD main menu.
Function options on the OSD main menu
Function Option Description
LANGUAGE
Used to select a menu display language. Available language options are
CHINESE, ENGLISH, POLISH, FRANCAIS, ESPAÑOL, and ITALIAN.
VIDEO SYSTEM
Used to select a video system. Available video systems are PAL and
NTSC.
PICTURE ADJUST Used to set the image effect.
ADVANCE SETUP Used to set system parameters for the camera.
RESET CAMERA Used to initialize the setting of the OSD main menu for the camera.
VERSION NO· Used to display the camera version number.
SAVE &EXIT Used to save or exit the OSD main menu.
EXIT Used to return to the first page of the OSD main menu.
Image Setting Menu
When you select PICTURE ADJUST on the OSD main menu and press the multi
function switch control key downward, the IMAGE menu appears, as shown in Figu-
re 6-2.
This manual suits for next models
1
Table of contents
Other Eneo Security Camera manuals
Eneo
Eneo VKC-13100/IR-2810 User manual
Eneo
Eneo ISM-78F0021W0A User manual
Eneo
Eneo NXD-2012PTZ1080 B User manual
Eneo
Eneo DOME-S1 User manual
Eneo
Eneo 213021 User manual
Eneo
Eneo NXD-2012PTZ1080 B Installation instructions
Eneo
Eneo PXB-2080MIR B User manual
Eneo
Eneo INP-54M2812M0A User manual
Eneo
Eneo ITB-7SF0075M0A User manual
Eneo
Eneo VKCD-12100F2812IR User manual
Eneo
Eneo IPC-52A0030P0A User manual
Eneo
Eneo DOME-WB8 User manual
Eneo
Eneo 222184 User manual
Eneo
Eneo ICB-72M2713MAA User manual
Eneo
Eneo IEB-72M2812MCA User manual
Eneo
Eneo HDB-2080Z03IR D User manual
Eneo
Eneo 232569 User manual
Eneo
Eneo PXB-080Z03B User manual
Eneo
Eneo ICB-62M2712M0A User manual
Eneo
Eneo TPP-82A0030MIA User manual
