Eneo ICB-62M2712M0A User manual
Quick Installation Guide
1/2,8” Network Camera,
1920x1080, Day&Night, D-WDR,
2.7-12mm, Infrared, IP67
ICB-62M2712M0A
EN
IT
FR
DE
2
Table of content
Parts supplied ...............................................................................................................5
Part names .....................................................................................................................6
Installation instructions ...............................................................................................7
Using Grommet..................................................................................................................................................................7
Using RJ45 Easy Cap for Network cable....................................................................................................................7
Recommended cable length into the Junction box base ..................................................................................8
Pan & Tilt adjustments.................................................................................................................................................. 12
Sunshield Assembling.................................................................................................13
Quick Network Setup ..................................................................................................14
Web viewer description .............................................................................................................................................. 15
Player control & Display......................................................................................................................................... 15
PTZ Control.................................................................................................................................................................. 16
User Manual ............................................................................................................................................................... 17
Setup Menu Table ..................................................................................................................................................... 18
Quick Setup .................................................................................................................20
Information ...................................................................................................................................................................... 20
Users ................................................................................................................................................................................... 20
Add ................................................................................................................................................................................ 21
Edit.................................................................................................................................................................................. 21
Delete ............................................................................................................................................................................ 22
Date & Time ..................................................................................................................................................................... 22
Current Time ............................................................................................................................................................... 22
New Time...................................................................................................................................................................... 22
Time Zone.................................................................................................................................................................... 22
Day & Time Display................................................................................................................................................... 23
Network ............................................................................................................................................................................. 23
IPv4 Address ............................................................................................................................................................... 23
IPv6 Address ............................................................................................................................................................... 24
DNS ................................................................................................................................................................................ 24
Further information ....................................................................................................25
3
EN
Safety instructions
General safety instructions
•
• Keep the operating instructions in a safe place for later use.
• Installation, commissioning and maintenance of the system may only be carried out by authorised
individuals and in accordance with the installation instructions - ensuring that all applicable standards and
guidelines are followed.
• Protect the devices from water penetration and humidity, since these can cause lasting damage.
• Should moisture nevertheless enter the system, under no circumstance switch on the devices under these
conditions, instead send them for examination to an authorised specialist workshop.
•
• The device must be protected from excesses of heat, dust, humidity and vibration.
• When separating the system from the voltage supply, only ever use the plug to pull out the cable. Never
pull directly on the cable itself.
• Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or damaged
and that no humidity can penetrate into them.
• In the event of a malfunction, please inform your supplier.
• Maintenance and repairs may only be carried out by authorised specialist personnel.
• The system must be isolated from the power supply before opening the housing.
•
warranty claim.
• Connection cables should always be exchanged through Videor E. Hartig GmbH.
• Use only original spare parts and accessories from Videor E. Hartig GmbH.
• The housing should only be cleaned using a mild domestic cleaning agent. Never use solvents or petrol as
these can permanently damage the surface.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• The installer is responsible for the maintenance of the enclosure as per the technical data, e.g. by sealing
the cable outlets with silicone.
•
• The devices may only be operated in the temperature range indicated in the data sheet and within the
• The camera may never be pointed directly at the Sun with the aperture open (this will destroy the sensor).
• It is unavoidable that during manufacture and to a certain extent during later use, humidity will be present
may condense inside the housing.
• To avoid this condensation inside the very tightly sealed housing, the manufacturer has inserted silica gel
sachets in the housing of the various camera types.
• It is however a physical given, that these silica gel bags will reach saturation after a certain amount of time.
They should therefore be replaced with new silica gel sachets.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• A multipolar, easily accessible isolation device should be installed in the proximity of the IR Spotlight, in
order to disconnect the device from the power supply for service work.
• The earth connection must be made according to the low impedance requirement of DIN VDE 0100.
• Subsequent painting of the equipment surface can impair the function.
• Any warranty claim is invalidated by subsequent painting.
• A safety margin of > 1m from the spotlight must be maintained when viewing directly into the IR Spotlight
in a darkened environment.
• Do not look directly at invisible LED radiation using optical instruments (e.g. a reading glass, magnifying
glass or microscope), since this can endanger the eyes, LED Class 1M.
• Operation of the IR spotlight with a defective cover or during repair is prohibited.
4
Class A device note
This is a Class A device. This device can cause malfunctions in the living area; in such an event, the operator may
need to take appropriate measures to compensate for these.
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European Union and other European countries with separate
collection systems).
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Graphical symbols
Please pay attention to the safety instructions, and carefully read through this instruction guide before initial
operation.
Important points of warning are marked with a caution symbol.
iImportant points of advice are marked with a notice symbol.
5
EN
Parts supplied
• Network Camera
• Operating Instruction
• Mounting Template
• Plastic Anchor: 6 x 30mm (4x)
• Mounting Screw: 4 x 30mm (4x)
• Hex Wrench: 3mm (1x)
• Hinge Pin (1x)
• Cable Tie (2x)
• Grommet (2x)
•
• RJ45 Easy Cap for Grommets
6
Part names
Junction Box Base
Junction Box Top
Dual window
Bracket
Hinge Pin
Sunshield
2xWater drain
Micro SD Card slot
IP Reset
LED Control
Switch
2x Lock/Unlock Screw
Body Case
Inside of Opening Cover
Please close the cover
after s etting up and
tighten it properly.
Otherwise, moisture
can get inside the
housing.
Junction Box Base
User Network connector
Ethernet from Cam.
Network wiring Connector (LSA)
for user network
Grommet
(Default)
7
EN
Installation instructions
Using Grommet
wrap the cable properly as illustrated. If it doesn’t wrap the cable properly,it could cause
the water leakage problem.
Using RJ45 Easy Cap for Network cable
8
Recommended cable length into the Junction box base
• CABLE with RJ-45 Connector: 70mm~80mm
• CABLE for Network Wiring Connector: 20mm~30mm (excluding cable tripping
section) 8P cable stripping distance: 20mm~30mm
Install the mount onto a strong structure.
Prepare the Junction box base and the accessaries for installation.
1. Locate the mounting template at the installation position and drill the ceiling or
wall if needed.
2. Route the Power/Ethernet cables through the grommets from the wall. Insert the
grommets onto the Junction box base.
3.
mounting screws (4x30mm).
9
EN
4. Hook up the Power & I/O wires and Network cable to the connectors. Network
cable can be connected to either RJ-45 connector or LSA connectors.
TIA/EIA 568A TIA/EIA 568B
1. Green-White 1. Orange-White
2. Green 2. Orange
3. Orange-White 3. Green-White
4. Blue 4. Blue
5. Blue-White 5. Blue-White
6. Orange 6. Green
7. Brown-White 7. Brown-White
8. Brown 8. Brown
Connections to LSA connectors
10
5.
6. Assemble the Junction box top to the Junction box base using a hinge pin. Hinge
can be inserted at either side for convinience.
7. Connects the Power/Ethernet cables from camera.
8. Cover the Junction box top and tighten with assembly screws (4pcs).
Hinge pin
Junction Box Top
Other manuals for ICB-62M2712M0A
1
Table of contents
Languages:
Other Eneo Security Camera manuals
Eneo
Eneo IPD-68M3611P5A User manual
Eneo
Eneo ICB-68M3611M0A User manual
Eneo
Eneo 230800 User manual
Eneo
Eneo IPD-62M2713MAA User manual
Eneo
Eneo 232574 User manual
Eneo
Eneo ICB-62M2712M0A User manual
Eneo
Eneo HDD-2110M1080 User manual
Eneo
Eneo HDC-2080Z03 User manual
Eneo
Eneo MSM-42F0037MPA User manual
Eneo
Eneo VKCD-1311FM/VF User manual
Eneo
Eneo VKC-1416B-/PP User manual
Eneo
Eneo FASTRAX III User manual
Eneo
Eneo IPD-72A2712M5A User manual
Eneo
Eneo 213020 User manual
Eneo
Eneo 231833 User manual
Eneo
Eneo ICB-72M2713MAA User manual
Eneo
Eneo EDMC-142 User manual
Eneo
Eneo IPP-82A0030MHA User manual
Eneo
Eneo VKCD-1319SM/3.6 User manual
Eneo
Eneo VKC-1416B User manual
