Eneo IND-32F0016P0A User manual

EN
DE
Learn more about eneo IN series
on our YouTube channel.
Quick Installation Guide
IND-32F0016P0A
Network Dome Fix, 360°,
4000x3000, Day/Night,
DWDR, AI, 1,6mm, IR,
12VDC, PoE, IP66

2

3
EN
Table of Content
SAFETY INSTRUCTIONS �������������������������������������������������������������������������������������������������������� 4
General������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������4
Product specic �������������������������������������������������������������������������������������������������������������������������������������������������������������������������5
PRIOR TO USE �������������������������������������������������������������������������������������������������������������������������7
Dimensions (in mm) & Specications��������������������������������������������������������������������������������������������������������������������������������7
Parts supplied�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
CONNECTION��������������������������������������������������������������������������������������������������������������������������8
INSTALLATION������������������������������������������������������������������������������������������������������������������������ 9
CONNECTION������������������������������������������������������������������������������������������������������������������������10
QUICK NETWORK SETUP�����������������������������������������������������������������������������������������������������11
Password Requirements ������������������������������������������������������������������������������������������������������������������������������������������������������ 12
LOGIN ������������������������������������������������������������������������������������������������������������������������������������12
FURTHER INFORMATION ����������������������������������������������������������������������������������������������������13

4
Safety Instructions
General
• Before switching on and operating the system, rst read this safety advice and the operating instructions�
• Keep the operating instructions in a safe place for later use�
• Installation, commissioning and maintenance of the system may only be carried out by authorised individuals
and in accordance with the installation instructions - ensuring that all applicable standards and guidelines are
followed�
• Protect the devices from water penetration and humidity, since these can cause lasting damage�
• Should moisture nevertheless enter the system, under no circumstance switch on the devices under these
conditions, instead send them for examination to an authorised specialist workshop�
• The system must never be used outside of the technical specications, since this can destroy it�
• The device must be protected from excesses of heat, dust, humidity and vibration�
• When separating the system from the voltage supply, only ever use the plug to pull out the cable� Never pull
directly on the cable itself�
• Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or damaged and
that no humidity can penetrate into them�
• In the event of a malfunction, please inform your supplier�
• Maintenance and repairs may only be carried out by authorised specialist personnel�
• The system must be isolated from the power supply before opening the housing�
• The device may only be opened by qualied service personnel� Unauthorised access invalidates any warranty
claim�
• Connection cables should always be exchanged through Videor E� Hartig GmbH�
• Use only original spare parts and accessories from Videor E� Hartig GmbH�
• The housing should only be cleaned using a mild domestic cleaning agent� Never use solvents or petrol as these
can permanently damage the surface�
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are not
displaced during installation� Damaged seals must not be installed and will invalidate any warranty�
• The installer is responsible for the maintenance of the enclosure as per the technical data, e�g� by sealing the
cable outlets with silicone�
• Wire end ferrules should be used when shortening the exible connection cables�
• The devices may only be operated in the temperature range indicated in the data sheet and within the dened
air humidity range�

5
EN
Product specic
• The camera may never be pointed directly at the Sun with the aperture open (this will destroy the sensor)�
• It is unavoidable that during manufacture and to a certain extent during later use, humidity will be present in
the ambient air within the device’s housing� In the event of large temperature uctuations, this humidity may
condense inside the housing�
• To avoid this condensation inside the very tightly sealed housing, the manufacturer has inserted silica gel
sachets in the housing of the various camera types�
• It is however a physical given, that these silica gel bags will reach saturation after a certain amount of time� They
should therefore be replaced with new silica gel sachets�
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are not
displaced during installation� Damaged seals must not be installed and will invalidate any warranty�
• A multipolar, easily accessible isolation device should be installed in the proximity of the IR Spotlight, in order to
disconnect the device from the power supply for service work�
• The earth connection must be made according to the low impedance requirement of DIN VDE 0100�
• Subsequent painting of the equipment surface can impair the function�
• Any warranty claim is invalidated by subsequent painting�
• A safety margin of > 1m from the spotlight must be maintained when viewing directly into the IR Spotlight in a
darkened environment�
• Do not look directly at invisible LED radiation using optical instruments (e�g� a reading glass, magnifying glass or
microscope), since this can endanger the eyes, LED Class 1M�
• Operation of the IR spotlight with a defective cover or during repair is prohibited�

6
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European Union and other European countries with separate collec-
tion systems)�
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life� To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources� Household users should contact ei-
ther the retailer where they purchased this product, or their local government oce, for details of where
and how they can take this item for environmentally safe recycling� Business users should contact their
supplier and check the terms and conditions of the purchase contract� This product should not be mixed
with other commercial wastes for disposal�
Graphical Symbols
Please pay attention to the safety instructions & carefully read through this instruction guide before initial operation�
Important points of warning are marked with a caution symbol�
Important points of advice are marked with a notice symbol�
Class A device note
This is a Class A device� This device can cause malfunctions in the living area; in such an event, the operator may need to
take appropriate measures to compensate for these�

7
EN
PRIOR TO USE
• Only mount this unit in suitable locations, such as a concrete wall�
• When mounting, use the accessories supplied depending on the mounting position�
Dimensions (in mm) & Specications
Construction:
Aluminum Cast
Dimensions(mm):
55,00 x 120,00
Weight:
400,00 g (0�88 lb)
Parts supplied
Camera Screw DriverScrews & Expansion Bolts QIG

8
Connection
Attention:
There are two connection modes
• The camera is connected directly to the router� When using a router without PoE connections, the
power supply of the camera can be realised via PoE switch, PoE injector or 12VDC power supply unit�
• The camera is connected to an NVR recorder that has PoE connections�
Router
iPhone / iPad
Android Phone
Internet
DC 48V
PoE
Camera
Power + Data
Out
PoE Injector
or
PoE Switch
LAN IN
Phone PC
PoE
Camera
PoE NVR Router

9
EN
Installation
Step 1:
Remove the plastic base press the release
clip towards the camera, it will ex slightly�
Turn back anti-clockwise as illustrated above
to release�
Step 3: Re-attach the camera to the tting plate
A: Remove two screws in the cover plate; and insert the memory card to the camera
B: Push holder back to original xed position�
Step 2:
Use tting plate to mark holes for the attach-
ment pack, attach to surface�
Note:
• Memory card faces towards the camera, so that the pins contact with the contact connections in the slot�
• The reset button on the bottom is activated using a small pin, which you can press inside hole shown
as the above picture�

10
Connection
Note:
• Make sure to follow correct polarity (+/-) as marked on the power connector�
• Use DC power if no PoE is being used�
• PoE power is Class 3 for the device�
Note:
• Audio input and output is 1V line level�
• Additional amplication is required to drive speakers�
• Audio input whould not work directly with a simple microphone� Typically microphones need a
pre-amp to bring the voltage level to line level�
The camera has the following cables:
1� RJ45 Network Interface:
Connect to a router or switch on your network using RJ45 Ethernet cable (Cat5e
or better)� 100MHz connection, PoE supported (class 3 PoE switch or injector as
required)
2� Alarm Terminal Block
3� Reset Button: recessed button inside
4� DC Power input (DC12V (600mA): 12V DC power input terminal)
5� BNC Video Output: Service Video
Alarm connections and Audio are supported� If required, connect audio using standard RCA
style mono connections� Alarm connection block can be removed for convenient attachment
of alarm input�
Table of contents
Languages:
Other Eneo Security Camera manuals

Eneo
Eneo APD-7SV2812MVA User manual

Eneo
Eneo HDD-2000MIR720 User manual

Eneo
Eneo EDMC-3221/E User manual

Eneo
Eneo VKCD-1327WFM/MF User manual

Eneo
Eneo VKC-1324A/W3 User manual

Eneo
Eneo IPP-62A0020M0B User manual

Eneo
Eneo MPP-72A0020MIA User manual

Eneo
Eneo FXD?1002 IR User manual

Eneo
Eneo VKC-1341A/12-24 User manual

Eneo
Eneo MPD-62V2812P0B User manual

Eneo
Eneo IEB-72M2812MCA User manual

Eneo
Eneo IEB-62F0036P0A User manual

Eneo
Eneo MEB-62V2713P0A User manual

Eneo
Eneo VKCD-13100F2810 User manual

Eneo
Eneo MPB-72M2812M0A User manual

Eneo
Eneo 232572 User manual

Eneo
Eneo VKC-1415 User manual

Eneo
Eneo IPP-62A0012M0A User manual

Eneo
Eneo PLD-2036PTZ User manual

Eneo
Eneo VK-1322 User manual




















