Emerson Damcos KC 65 User manual

Quick Installation Guide

Version: QIG 8000-81-003 Ed 01

Release: February, 2020

Damcos™Actuators

KC 65, KC 125, KC 250, KC 325, KC 400

Quick Installation Guide

This instruction is for trained personnel only

For additional technical information please refer to:

SD 1100-3E07 Product Data Sheet for Damcos KC Hydraulic linear double-acting actuator

SD 2000-0E07 Product Data Sheet for DPI-C and DPI-E Position Indicators

SD 3000-0E06 Product Data Sheet for Damcos Block System

SD 6601-2E04 Product Data Sheet for Damcos PHP 25-05 Portable Hand Pump

SI 0001-5E05 Instruction for Flushing, Remote Valve Control System

SD 2001-2E01 Product Data Sheet for Damcos DDPI-E, E/C and -C Double Position Indicators

Installation Guide for KC 65, KC 125, KC 250 and KC 400 Actuators in English

Table of Contents Quick Installation Guide

February 2020 RM 8000-100-01 Ed 01

Table of Contents

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Normal Installation

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Parts Delivered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Before You Start the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Calculation of Preload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mounting the Actuator to the Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Test of the DPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Test of DPI-E, On/Off signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Test of DPI-C, analog signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjustment of the DPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Determine the Configured Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Additional Instructions for Modification/Repair Only

Dismounting and Disassembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Preparations before Dismounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Disassembling the Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Assembling the Actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Appendix A

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Quick Installation Guide Table of Contents

RM 8000-100-01 Ed 01 February 2020

General Information Quick Installation Guide

February 2020 QIG 8000-81-003 Ed 01

General Information

Introduction

This instruction covers dismounting, disassembling and installation of the Actuator KC 65, KC 125,

KC 250, KC 325, KC 400 when mounted to a valve with extended stem/bonnet.

Reservations

•Installation or repair must be performed by trained personnel only.

•Tools and equipment used for installation and repair must in good condition and calibrations up

to date.

•Illustrations shown in this instruction reflect actuators with control block and electrical DPI.

However, the instruction will be applicable for actuators without DPI too. Pay attention to notes

for models ‘with’ or ‘without’ DPI.

•The environment must be clean and without the risk of getting dirt into the unit when taken

apart. Make sure you have access to an indoor workshop for the actual repair.

•Any damage caused by incorrect handling of the equipment is not covered by the manufac-

turer’s warranty.

Warning, Cautions and Notes

In order to avoid any personal injuries, damage of equipment or loss of production time, please

observe and obey Warning, Cautions, and Notes made throughout this document.

The following warning levels are used in the documentation of Damcos A/S for the safety of people

and equipment.

Warning! Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

Caution! Indicates a potentially hazardous situation which, if not avoided, may result in property

damage.

Note! Indicates important information regarding the product.

Quick Installation Guide General Information

QIG 8000-81-003 Ed 01 February 2020

Quick Installation Guide

February 2020 QIG 8000-81-003 Ed 01

Normal Installation

Quick Installation Guide

QIG 8000-81-003 Ed 01 February 2020

Overview Quick Installation Guide

February 2020 QIG 8000-81-003 Ed 01

Overview

ADPI - Direct Position Indicator 1 (referred to as ‘DPI’ in this document)

BControl block 2

CFittings for hydraulic hand pump connection

DBleed valve

EVisual indicator

FScrews (4 pcs)

GValve bonnet/stem top flange

HActuator spindle

IIndicator bushing

JDPI socket

KYoke

LScrew

Parts Delivered

•Actuator with/without electrical indicator (A)

•Build-in indicator bushing (I)

•Mounting instruction (this document)

1. Some actuators are equipped with visual indicator only (E) and no electrical indicator (A). This

instruction covers actuators equipped with an electrical indicator (A). Most steps and illustrations

will however be applicable for installation of actuators without the electrical indicator (A).

2. Some models only!

Quick Installation Guide Preparations

QIG 8000-81-003 Ed 01 February 2020

Preparations

Before You Start the Installation

•Locate the valve bonnet/stem on which the

actuator is to be installed/repaired.

•If exchange/repair of existing actuator:

–Locate the name plate and identify the 'Type'

name.

–Compare the type name listed on the name

plate with the type name on the part(s) to be

replaced.

•Make sure that tools required (see below) are

available, before you start.

•If repair of existing actuator:

–Before dismounting the actuator make sure

to identify the actual cause of the error, pref-

erably by consulting ‘Trouble Shooting’ sec-

tion in this instruction.

•Advise the system operators and other relevant persons that maintenance is ongoing.

•Make sure that relevant operation systems are set to maintenance mode, and alternative means

of operation is ensured (if required).

•Read this instruction carefully before you start the actual repair or installation.

•Follow all steps carefully, and do not skip any steps unless specified how and when.

Tools Required

•Fork wrenches. Different sizes depending on actuator model

•Unbrako hex keys (according to table on page 41)

•Long T-hex keys (according to table on page 41)

•Torque wrench (according to table on page 13)

•Long pair of tweezers

•Needle nose pliers

•Hydraulic hand pump

•Multimeter

•Vernier caliper

•Loctite 542 adhesive (or similar)

Other Tools Required

Inspect the valve bonnet/stem prior to the installation/repair in order to identify if any tools, other

than those listed above, are required.

Indoor Facility

Make sure you have access to a workshop (indoor facility) for the actual repair.

This manual suits for next models

Table of contents

Other Emerson Controllers manuals

Emerson

Emerson Fisher FIELDVUE DVC6200p Configuration guide

Emerson

Emerson Dixell XT130C Wiring diagram

Emerson

Emerson Fisher 67C User manual

Emerson

Emerson Fisher 67DFSR User manual

Emerson

Emerson FieldQ Series Operational manual

Emerson

Emerson Control Link Refrigeration System Controller User manual

Emerson

Emerson EC2-552 User manual

Emerson

Emerson Powerdrive F300 User manual

Emerson

Emerson Dixell XV300K Series Wiring diagram

Emerson

Emerson EL-O-Matic F-Series User manual

Emerson

Emerson unidrive m201 User manual

Emerson

Emerson MR98 Series User manual

Emerson

Emerson M200-01200024A10101AB100 User manual

Emerson

Emerson DIXELL XR30CHC Wiring diagram

Emerson

Emerson EC1-233 User manual

Emerson

Emerson Fisher 749B User manual

Emerson

Emerson Fisher 161AY Series User manual

Emerson

Emerson PCM-22 User manual

Emerson

Emerson Bettis XTE3000 User manual

Emerson

Emerson FISHER MR108 Series User manual

Emerson

Emerson Dixell XRB Wiring diagram

Emerson

Emerson Fisher 299H User manual

Emerson

Emerson FISHER 657NS User manual

Emerson

Emerson PaCSystems VersaMax Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide