Emerson Bettis RP4AF User manual

Bettis RTS Relay Board (RP4AF)

Electric Actuator

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0

June 2021

Revision Details

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0

Revision Details

No. Date Version Type of Change

1 June 2021 0 General update

(Migration to new template)

Revision Details

Table of Contents

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0

Table of Contents

Section 1: Tools

Tools.........................................................................................................................1

Section 2: Material

Material.....................................................................................................................2

Section 3: Installation

Installation................................................................................................................3

Section 4: Programming

Programming............................................................................................................7

Notes

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0

This page is intentionally left blank

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0

1Tools

Section 1: Tools

! WARNING

Remove all power supplies before doing the exchange. Act always with caution during

the exchange!

• Needle nose pliers

• Screw driver phillips

• Screw driver at

• Allen key 5

• Socket wrench 5

Figure 1

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0 Rev. 0

2Material

Section 2: Material

• 1x relay board RP4AF (ID:15772)

• 2x steel screw M3x16 (ID:952)

• 3x plastic distance 8 mm (ID:9896)

• 1x plastic screw M3x15 (ID:9895)

• 1x plastic nut M3 (ID:7084)

• 2x lock plates M3 red (ID:13674)

Figure 2

Figure 3

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0

3Installation

Section 3: Installation

Unscrew the 4 hexagon socket screws from the cover and remove it carefully. Mind the

connection cable between display and logic board.

Figure 4

Unscrew the 4 cross recessed screws from the existing logic board and afterwards tilt it

carefully to you.

Figure 5

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0 Rev. 0

4Installation

Section 3: Installation

Remove the cable with the 10-pole connector and connect it with the relay board.

Figure 6

Insert plastic screw M3x15 in provided hole and add plastic distance on it, after connect the

relay board with the logic board on suitable connector. Add plastic nut on plastic screw to

x the board.

Figure 7

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0

5Installation

Section 3: Installation

Put two plastic distances 8 mm between logic and relay board, insert the M3x16 steel

screws through the estimated holes in logic board, plastic distances and relay board and

secure the screws with the red lock plates.

Figure 8

Install die logic + relay board back to the control (two small screws for original installation

will remain). Take care of possible damage of cables or other parts.

Figure 9

June 2021

Installation, Operation and Maintenance Manual

VCIOM-15749-EN Rev. 0 Rev. 0

6Installation

Section 3: Installation

Connect cable between display cover and logic board. Perform a Firmware update now,

before installing display cover on the unit. This update is important for the following

programming steps (use FW version display 1507, logic 219 or higher). For a detailed

description on how to perform a rmware update, please refer to separate manual.

During display cover installation, pay attention to the O-ring which must be sit correct

between cover and housing and x it with the 4 hexagon socket screws.

Figure 10

Other manuals for Bettis RP4AF

Table of contents

Other Emerson Controllers manuals

Emerson

Emerson Fisher easy-Drive 200L User manual

Emerson

Emerson Shafer ECAT User manual

Emerson

Emerson Fisher FIELDVUE DVC6005 Series Configuration guide

Emerson

Emerson Fisher 310A-32A-32A User manual

Emerson

Emerson Copeland XC643 User guide

Emerson

Emerson FISHER T208 Series User manual

Emerson

Emerson MR105 User manual

Emerson

Emerson Bettis PressureGuard Manual

Emerson

Emerson Bettis RPX Series User manual

Emerson

Emerson Bettis RTS FL Series User manual

Emerson

Emerson Fisher HSR Assembly instructions

Emerson

Emerson Fisher 585CLS User manual

Emerson

Emerson dixell XR60CX Wiring diagram

Emerson

Emerson Fisher FIELDVUE DVC6200 HW1 User manual

Emerson

Emerson Fisher 912N Series User manual

Emerson

Emerson 289A User manual

Emerson

Emerson MR98 Series User manual

Emerson

Emerson Unidrive M700 User manual

Emerson

Emerson Bettis EHO User manual

Emerson

Emerson PCM-22 User manual

Emerson

Emerson Y696 User manual

Emerson

Emerson unidrive m201 User manual

Emerson

Emerson Asco Sentronic LP 617 Series User manual

Emerson

Emerson Fincor 2330MKII Series Technical Document

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide