Emerson 818-2050 Installation guide

EMERSON CONTROL LINK CPC® P/N 818-2050 REFRIG. CONTROLLER: OVERVIEW & OPERATION

CL-RSC Operation

EMERSON CONTROL LINK CPC® P/N 818-2050 REFRIG. CONTROLLER: GENERAL PARAMETERS

General Parameters

 General parameters are used by techni-

cians and operators to set the control set-

points and defrost schedules.

Before Changing General Parameters

 Before changing parameters, clear any

active alarms by pressing the Alarm Si-

lence button.

Changing General Parameters

 Do not lightly press buttons! You MUST

use considerable force while pressing

controller buttons or your commands

will not register!

 Press (SET) and hold for five seconds.

 If general mode programming has been

password protected, you will see PASS on

the display.

 Press (SET) and use the arrow keys to in-

crement the password number until the

correct password is shown and then press

(SET).

 Note: If general parameters an not pass-

word protected, PASS will not appear on

the display.

The display will show the first programmable

parameter: CSP (Case temperature Set Point).

The arrow keys may be used to scroll through

the list of general parameters. To change the

value of any parameter follow these steps:

1. Select the parameter using the arrow keys

(until the code is shown.

2. Press (SET).

3. Current value of this parameter will display.

Use arrow keys to change values.

4. Press (SET) to accept value.

5. Repeat steps 1-4 until all set points have

been properly configured.

6. When finished, press (SET) again for five

seconds to save changes and exit. The

display will blank for one second and then

revert to normal display if the save was

successful.

7. To cancel all changes, press and hold

(SILENCE) for five seconds, or leave con-

troller idle for 60 seconds. You will lose all

setpoint changes made since you entered

General Programming Mode.

See Warning at right.

SFT

Software Version - - -

WARNING!

You MUST press and hold

(SET) after changing setpoints

for changes to be permanent.

Leaving the controller idle for

60 seconds will log you

out and cancel all your

setpoint changes.

Note! See Technical Information Sheet In This Manual For This Case’s Settings

Note! See Technical Information Sheet In

This Manual For This Case’s Settings

EMERSON CONTROL LINK CPC® P/N818-2050 CONTROLLER: ADVANCED PARAMETERS & ALARMS

Advanced Parameters

 General parameters are used to change

higher-level parameters not directly related to

system operations.

 Selecting and changing advanced parame-

ters works the same way as general parame-

ters, except that they are accessed in a dif-

ferent way and require entering a different

password.

Before Changing Advanced Parameters

 Before changing parameters, clear any ac-

tive alarms by pressing the Alarm Silence

button.

Changing Advanced Parameters

 Do not lightly press buttons! You MUST

use considerable force while pressing

controller buttons or your commands will

not register!

 Press and hold the UP and DOWN buttons

simultaneously for five seconds to enter the

Advance Programming Mode. The display

will show

APAS

 Press (SET) and use the arrow keys to select

the correct password (default is 0000), and

press (SET) to enter it.

Installation Photos

 See next page for installation photos of Emerson Control Link CPC® P/N 818-2050 Refrigeration Controller.

 Note: Exact location may vary depending upon model and features.

EMERSON CONTROL LINK CPC® P/N 818-2050 REFRIG. CONTROLLER: INSTALLATION PHOTOS

Control Link

Refrigeration System Controller

Ballast

Enlarged View of Control Link

Refrigeration System Controller

Main Power

Switch

Note: This Sheet Applicable

To “CO” Cases Only

EMERSON CONTROL LINK CPC® P/N 818-2050 REFRIG. CONTROLLER: INSTALLATION PHOTOS

View of Control Link

Refrigeration System

Controller With Housing

Cover Removed

Control Link Refrigeration

System Controller With

Housing Cover Attached

EMERSON CONTROL LINK CPC® P/N 818-2050 REFRIG. CONTROLLER: INSTALLATION LOCATION

Main Power

Switch

Controller

Box

Controller

Field Wiring

Box

Table of contents

Other Emerson Controllers manuals

Emerson

Emerson EXD-HP1/2 User manual

Emerson

Emerson El-O-Matic ELQ Series Instruction manual

Emerson

Emerson CASH A-401 Manual

Emerson

Emerson 1301G User manual

Emerson

Emerson EXD-SH2K User manual

Emerson

Emerson BETTIS E796 2000 M2CP User manual

Emerson

Emerson P159A Series Installation and operating instructions

Emerson

Emerson Unidrive M100 Use and maintenance manual

Emerson

Emerson Digistart IS1x0043B series User manual

Emerson

Emerson Bettis XTE3000 User manual

Emerson

Emerson FD113 User manual

Emerson

Emerson Fisher 67CS User manual

Emerson

Emerson Fisher 2052 User manual

Emerson

Emerson Fisher easy-Drive 200L User manual

Emerson

Emerson Fisher FIELDVUE DVC6000 User manual

Emerson

Emerson Fisher 161AY Series User manual

Emerson

Emerson unidrive m200 User manual

Emerson

Emerson Bettis CBB Series Installation instructions

Emerson

Emerson Dixell WING XW220L Wiring diagram

Emerson

Emerson Fisher FIELDVUE DVC6200 SIS User manual

Emerson

Emerson Dixell IEV12D Wiring diagram

Emerson

Emerson Fisher 785C User manual

Emerson

Emerson Hytork XL26 Guide

Emerson

Emerson Dixell XR75CX Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide