Edelbrock 5224 User manual

Edelbrock Strut Tower Brace

Catalog #5224

-2001 Mustang GT (Except Cobra)

Please study these instructions carefully before installing your new Strut Tower Brace. If you have any

questions or problems, please contact our Technical Hotline at : 1-800-416-8628 from 7 am –

through Friday, Pacific Standard Time.

ted tools needed for installation:

•9/16 wrench

•7/16 wrench

•5/32 allen wrench

•7/32 allen wrench

•7mm socket and ratchet

•Punch and Hammer

•Drill bits and Drill motor

DISASSEMBLY

1. Unbolt and move out of the way the small fuse block in front of the right side shock tower.

2. Unclip the fuse block in front of the left side shock tower and move out of the way.

3. Remove the windshield wiper arms by lifting them off the windshield and pulling outward on the retaining clip

4. Remove the hood weather strip seal, remove plastic retaining clips in the channel under the seal, gently pull

up on the plastic cowl cover at the base of the windshield, gently pull the

elbow connection on the left side of the windshield. Carefully remove the plastic cowl and set o

5. Remove 7mm screws retaining the plastic firewall cover, and remove the firewall cover.

6. Remove the bolts retaining the right side wiper arm shaft and slide to the right.

1. Carefully set the strut tower brace on to the strut towers, level the bar laterally in the vehicle, be sure to

leave enough material at both strut towers end plates to allow for drilling and bolting. Make sure the brace

the strut towers. Carefully mark the bolt holes using the punch, this will set how the bar

rilling the holes. Drill the holes in the strut towers.

2. Bolt the brace in place using the supplied 1” button head cap screws, AN washers, SAE flat washers, and

3. Using the strut brace as a guide mark the holes in the firewall with the punch. Remov

4. Slip the firewall nut plate into the cowl use the hardened washers as spacers, temporarily use the 3/8 hex

head bolts to retain the nut plate in place. Bolt the nut plate in place using the ¼ button he

SAE washers, and locking nut. Remove the 3/8 hex head bolts and install the strut tower brace use the long

tton head cap screws in the firewall brace with AN washers.

PARTS LIST

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Tech Line: (800) 416-8628

E-Mail: [email protected]

PN Qty. Description

25-4049 1Strut Tower Brace Assembly

22-5224 1Installation Kit

It may be necessary to periodically tighten the strut tower hardware. This Strut Tower Brace

can be complemented with other Edelbrock Suspension components and Edelbrock IAS

Shocks and Struts. Check with your retailer.

5. Trim the plastic firewall cover to fit with the strut tower brace and install. Slide and bolt the wiper shaft

e. Replace the plastic cowl cover be sure to reconnect the washer fluid line, install the hood

appropriate location. Fasten the fuse block in its bracket and bolt small fuse

6. Check for any interference with the wiring, throttle cable, transmission kick down cable, and hoses.

ASSEMBLY (Continued)

Table of contents

Other Edelbrock Automobile Part manuals

Edelbrock

Edelbrock Russell R09320 User manual

Edelbrock

Edelbrock 8126 User manual

Edelbrock

Edelbrock 351 User manual

Edelbrock

Edelbrock 65012 User manual

Edelbrock

Edelbrock 65732 User manual

Edelbrock

Edelbrock 65892 User manual

Edelbrock

Edelbrock 5724 User manual

Edelbrock

Edelbrock Acura Integra 6737 User manual

Edelbrock

Edelbrock Russell R09430 User manual

Edelbrock

Edelbrock Super Victor Race Manifold 2928 User manual

Edelbrock

Edelbrock 2166 User manual

Edelbrock

Edelbrock Performer-Plus 2132 Instruction manual

Edelbrock

Edelbrock 2925 User manual

Edelbrock

Edelbrock Qwikdata 91195 User manual

Edelbrock

Edelbrock 65003 User manual

Edelbrock

Edelbrock 68003 User manual

Edelbrock

Edelbrock 3821 User manual

Edelbrock

Edelbrock 70027 User manual

Edelbrock

Edelbrock 6607 User manual

Edelbrock

Edelbrock 3637 User manual

Edelbrock

Edelbrock Torker II 5081 User manual

Edelbrock

Edelbrock 5766 User manual

Edelbrock

Edelbrock 4803 User manual

Edelbrock

Edelbrock 1727 User manual

Popular Automobile Part manuals by other brands

Dakota Digital

Dakota Digital 650277 Installation

bosal

bosal 037031 Fitting instructions

Vintage Air

Vintage Air 571063 manual

GFB

GFB EX38 instruction manual

bosal

bosal 028091 Fitting instructions

Dodge

Dodge 8W-43 Wiring diagram

ICI

ICI Magnum FBM10DGN Installation

Volant Perfomance

Volant Perfomance 19435 installation instructions

BENDIX

BENDIX GEN 4 GEN 5 ABS manual

Vintage Air

Vintage Air 571065 manual

Rugged Ridge

Rugged Ridge 11503.13 installation instructions

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER instructions

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... maintenance

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G operating manual

Toshiba

Toshiba 48-1250 A instruction manual

aldes

aldes EHT2 installation instructions

Go Rhino

Go Rhino 24371T installation instructions

BBK

BBK 18950 installation instructions