Dormakaba Axessor Series User manual
2018-03
EN
Safe locks
Quick reference guide
Table of content
Package content
Operating and display elements of the input unit
External connections to / from the Axessor safe lock
Code structure and basic operation of Axessor units
Factory settings
Quick commissioning and customer-specific configu-
ration of safe locks
Axessor series
2
2
3
4
8
11
2 Safe locks: Axessor series
dormakaba Quick reference guide
2018-03
Package content
11
12
13
14
15
16
17
18
19
10
LCD 11 Menu TIME
Buzzer 12 Menu PROG
DEL key (delete / close the lock) 13 Menu DELAY
NUMERIC keys (enter codes) 14 Menu CODE
LEFT key (navigate) 15 Menu MISC
MODE key (programming access) 16 Lock open / close symbols
RIGHT key (navigate) 17 Replace battery symbol
INFO / ESC key (info / one menu up) 18 Warning symbol
ENTER key (confirm entry) 19 Time format 12h / 24h
USB port type B 20 Text lines
- Axessor safe lock
- Axessor input unit
- Connecting cable between Axessor safe lock and Axessor input unit
- Batteries (3x AA (LR6), 1.5V)
- Mounting material
- Leaflet with the dormakaba safe locks web address to USB drivers, fact sheet,
brochure, Axessor manuals, declaration of conformity, EN1300, UL, ECB-S and
VdS certifications
Operating and display elements of the input unit
https://www.dormakaba.com/gb-en/solutions/products/safe-locks/axessor/axessor-243198
2018-03 3Safe locks: Axessor series
dormakaba Quick reference guide
External connections to / from the Axessor safe lock
Note All Axessor safe lock inputs and outputs are configurable with the
AS284-USBW or AS284-NETW Axessor Programming Software.
Terminals/
Sockets
Description Unit Remarks
1 / 2 Output 2
Factory setting: lock
open (OR boolean
operation with bolt
open or motor open
or door open)
Resistive Load:
30VDC / 2A
50VAC / 0.5A
Relay with potential-free
working contact, Normally
Open (NO). Contact is open,
when lock is closed.
3 / 4 Output 1
Factory setting:
duress alarm
Resistive Load:
30VDC / 2A
50VAC / 0.5A
Relay with potential-free
working contact, NO. Contact
is closed, when duress alarm is
active.
5(-) / 6(+) Input 1
Factory setting: off
(not assigned)
12VDC /
min. 13mA,
max. 20mA
---
7 / 8 Input 2
Factory setting: off
(not assigned)
Potential-free
contact only
(do not apply
any voltage !)
Use a micro switch with gold-
plated contact 12VDC/50mA
(e.g. DB series by Cherry).
If Input 2 is assigned as "door
contact" and not inverted, an
open switch contact stands
for "door open". The bolt is
open as long as pins 7 and 8
remain electrically
disconnected.
X1 / X2 Connection for
input unit, eBox or
power supply
--- Use the connecting cable in
the package. Only use the
original Axessor power supply.
4 Safe locks: Axessor series
dormakaba Quick reference guide
2018-03
Open Lock
Note The overview shows the code structure of the Axessor series units.
Axessor USB safe locks are able to manage a maximum of 2 user groups.
Axessor CIT and Axessor IP safe locks are able to manage a maximum of
4 user groups.
Master code
0 0 x x x x x x
User group 1
(CIT & IP & USB)
Manager 1
1 0 x x x x x x
User 11
1 1 x x x x x x
:
User 19
1 9 x x x x x x
User group 2
(CIT & IP & USB)
Manager 2
2 0 x x x x x x
User 21
2 1 x x x x x x
:
User 29
2 9 x x x x x x
User group 3
(CIT & IP)
Manager 3
3 0 x x x x x x
User 31
3 1 x x x x x x
:
User 39
3 9 x x x x x x
User group 4
(CIT & IP)
Manager 4
4 0 x x x x x x
User 41
4 1 x x x x x x
:
User 49
4 9 x x x x x x
Courier code
9 0 x x x x x x
Duress code
Enter the Duress code by adding or deducting the value 1 to or from the last digit
of the User, Manager or Master code.
Code structure and basic operation of Axessor units
Note When Input 2 of the Axessor safe lock is not configured as "door contact",
the bolt will automatically close after the "Bolt open time in Bank mode"
or the "Bolt open time in One time mode (OTM)" has elapsed.
Enter a valid code
and press
Lock is closed Lock is open
Note Precondition to recognize a Duress code: Duress function must be
activated. Axessor IP and CIT units accept any value of +/- 1...9 as Duress
code.
2018-03 5Safe locks: Axessor series
dormakaba Quick reference guide
Weekly time lock
The lock is in a weekly locking period and it is not possible to
open the lock. The current time is displayed.
The battery compartment was opened
This message always appears when the battery compartment is
open or was opened. This message also serves as a dismounting
information for the input unit because the battery compartment
must also be opened to dismount the unit.
Identification of denied codes / Non-return time delay engaged
This status message appears when identifying with a denied
code. It is possible to deny codes with a higher code (Master,
Manager or with the AS284-W). The message is also shown as
long as an active Non-return time delay refuses to open the lock.
Penalty after wrong trials
A five-minute time penalty is initiated after entering 4 incorrect
codes one after another. The remaining penalty time is
displayed.
Locked
The lock is mechanically closed. The current time is displayed.
It is possible to open the lock by entering a valid code.
Status messages / Part 1
Open
The lock or the door switch is mechanically open. It is possible to
open the boltwork or safe door during the defined "Bolt open ti-
me" in Bank mode or OTM. If the boltwork was not opened, the
lock closes automatically after the "Bolt open time" has elapsed.
Depending on the selected operating mode and the currently executed operation,
the Axessor input unit offers a variety of status messages. The following examples
give an overview of important status messages. Please note: list is not complete.
Immediate time lock
The lock is blocked by the immediate time lock and it is not pos-
sible to open the lock. The current time is displayed.
Set the immediate time lock when the function is activated and
the lock is closed: press and enter a valid code to access di-
rectly to menu “PROG / IMM-TL”.
6 Safe locks: Axessor series
dormakaba Quick reference guide
2018-03
Enter
Programming mode
Press Enter a valid code
and press
Master menu,
Manager menu
or User menu
is now active.
Enter a valid code
and press
Lock is closed Lock is open
Confirmation after elapse of time delay
Once the time delay has elapsed, a code must be entered to
open the lock within a set time period. The remaining time is
displayed to enter the code.
Time delay
If activated, time delay starts counting after a valid code is
entered to open the lock. The remaining time is displayed.
Holiday time lock
The lock is in a holiday locking period and it is not possible to
open the lock. The current time is displayed.
Remote disabling
This message appears when the Remote disabling function is ac-
tivated. The remote disabling signal is activated and the lock is
closed. In this case, the opening of the lock is not possible.
Status messages / Part 2
Dual mode
If the Dual mode is activated, two codes must be entered to
open the lock. This message appears when the second code must
be entered.
Note Master code and Courier code can override the Dual mode.
Note There are three different Programming modes available in the Axessor
series. Enter the Master code, Manager code or User code to access the
desired programming level.
2018-03 7Safe locks: Axessor series
dormakaba Quick reference guide
and Select a menu or configure the currently displayed setting.
Enter the displayed menu or accept the previously configured setting.
or Leave the menu without accepting the previously configured setting.
Enter the User menu
1. Open the lock
2. Press
3. Enter a User code
4. Press
Enter the Manager menu
1. Open the lock
2. Press
3. Enter a Manager code
4. Press
Enter the Master menu
1. Open the lock
2. Press
3. Enter the Master code
4. Press
The graphic on the right
side gives an overview of
all options of the Master
menu of a CIT safe lock.
Adjustment of settings and navigation in Programming mode
DEL
8 Safe locks: Axessor series
dormakaba Quick reference guide
2018-03
Function Factory setting
USB
IP
CIT
Change with
Input
unit
AS284-USBW
AS284-NETW
(optional)
Language in display and in Info menu English ✓ ✓ ✓ ✓ ✓
All languages (English, French, German,
Dutch, Italian, Spanish, Hungarian, Polish,
Portuguese, Turkish) available in Info Menu
On ✓ ✓ ✓ ✓ ✓
Master code 0 0 1 2 3 4 5 6 ✓ ✓ ✓ ✓ ✓
Master code opens lock On ✓ ✓ ✓ ✓
Master code overrides immediate time lock
(IMM-TL) in closed state
On ✓ ✓ ✓ ✓
Master code bypasses time lock Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
Manager codes Off ✓ ✓ ✓ ✓ ✓
Settings when Manager codes are on:
· open lock
· change time delays (TD)
· change confirmation window (CONF)
· activate immediate time lock (IMM-TL)
· On (USB: fix)
· On (USB: fix)
· On (USB: fix)
· On
✓ ✓ ✓ ✓
User codes (except special User codes) Off ✓ ✓ ✓ ✓ ✓
User code can activate immediate time lock
(IMM-TL)
Off N/A ✓ ✓ ✓
User code 41 for Audit & battery code · USB: fix On
· IP: Off
· CIT: Off
✓ ✓ ✓ ✓ (IP)
✓ (CIT)
User code 42 for activation code (inclusive
Audit & battery code)
Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
User codes 45 / 46 for activation of relay
output pulse
Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
User code 47 for time code (inclusive Audit &
battery code)
· USB: fix On
· IP: Off
· CIT: Off
✓ ✓ ✓ ✓ (IP)
✓ (CIT)
User codes 48 / 49 for lock disabling /
enabling
Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
Courier code Off ✓ ✓ ✓ ✓ ✓
Settings when Courier code is on:
· bypass time delay and opens alone even in
Dual mode
· skips time delay but cannot open lock
· On
· Off
✓
N/A
✓
✓
✓
✓
✓ (IP)
✓ (CIT)
One shot code for group 4 Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
✓ (IP)
✓ (CIT)
Factory settings / Part 1
2018-03 9Safe locks: Axessor series
dormakaba Quick reference guide
0.0
Function Factory setting
USB
IP
CIT
Change with
Input
unit
AS284-USBW
AS284-NETW
(optional)
Buzzer volume High ✓ ✓ ✓ ✓ ✓
Beep each 30 seconds while lock is open On ✓ ✓ ✓ ✓ ✓
Beep each 60 seconds while (duress) time
delay counts
On ✓ ✓ ✓ ✓ ✓
Beep each 60 seconds while confirmation
window counts
On ✓ ✓ ✓ ✓ ✓
Door open beep alarm Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
✓
Number of wrong codes before penalty 4✓ ✓ ✓
Penalty upon wrong code entries 5 minutes ✓ ✓ ✓
Code denial:
· temp. lockout of Manager codes and User
groups
· temporary lockout of single users
Off ✓ ✓ ✓
✓
✓
✓
Duress code entry Off ✓ ✓ ✓ ✓ ✓
Duress code criterion (last digit) +/- 1 (USB:fix) ✓ ✓ ✓ ✓ (IP)
✓ (CIT)
Time related functions for up to 3 user
groups, partial, weekdays:
· time related time delay
· time related toggle Dual mode
· time related code disabling
Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
✓ (IP)
✓ (CIT)
Dual mode Off ✓ ✓ ✓ ✓ ✓
Settings when Dual mode is on:
· any two codes
· two codes of same group
· two codes of different groups
· two Manager codes for Programming mode
· Manager code cross accesses User codes
· On (USB: fix)
· Off
· Off
· Off
· Off
✓
N/A
N/A
N/A
N/A
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓ (IP)
✓ (CIT)
ICS operation (Single mode or Dual mode) Off N/A N/A ✓✓ (CIT with
AS280-W)
OTC operation Off N/A N/A ✓✓ (CIT with
AS280-W)
Mixed mode Off N/A N/A ✓✓ (CIT with
AS280-W)
Time delay in Bank mode 0 minutes ✓ ✓ ✓ ✓ ✓
Duress time delay in Bank mode (per group) 1 minute ✓ ✓ ✓ ✓
Factory settings / Part 2
10 Safe locks: Axessor series
dormakaba Quick reference guide
2018-03
0.0
Function Factory setting
USB
IP
CIT
Change with
Input
unit
AS284-USBW
AS284-NETW
(optional)
Time delay in One Time Mode (OTM) 0 minutes N/A N/A ✓✓ (CIT) ✓ (CIT)
Duress time delay in One Time Mode (OTM) 99 minutes N/A N/A ✓✓ (CIT) ✓ (CIT)
Time delay and duress time delay Count down ✓ ✓ ✓ ✓ (IP)
✓ (CIT)
Non-return time delay in One Time Mode
(with CIT) and Bank mode (with IP & CIT)
0 minutes N/A ✓ ✓ ✓ (IP)
✓ (CIT)
✓ (IP)
✓ (CIT)
OTM overrides non-related time delay Off N/A N/A ✓✓ (CIT) ✓ (CIT)
Bolt open time in Bank mode 6 seconds ✓ ✓ ✓ ✓ (IP)
✓ (CIT)
✓
Bolt open time in One Time Mode (OTM) 2 minutes N/A N/A ✓✓ (CIT) ✓ (CIT)
Process time 2 min. 30 sec. N/A N/A ✓✓ (CIT) ✓ (CIT)
Wake up mode CIT N/A N/A ✓✓ (CIT) ✓ (CIT)
Confirmation window (CONF) 5 minutes ✓ ✓ ✓ ✓ ✓
Immediate time lock period 0 minutes ✓ ✓ ✓ ✓ ✓
Maximum adjustable value for immediate
time lock period
144 hours ✓ ✓ ✓ ✓
Opening windows for time lock interruption Off N/A ✓ ✓ ✓ (IP)
✓ (CIT)
✓ (IP)
✓ (CIT)
Time lock functions also cover OTM Off N/A N/A ✓✓ (CIT) ✓ (CIT)
Date
Time
01.01.2017
0:00
✓ ✓ ✓ ✓ ✓
Time format ( 24hours or 12hours AM/PM ) 24 hours ✓ ✓ ✓ ✓ ✓
Change of summer / winter time (Daylight
Saving Time) and factory setting of time
zone
On to Central
European
Time
✓ ✓ ✓ ✓ ✓
Remote disabling by software Off ✓ ✓ ✓ ✓ ✓
Input 1: one function optionally assignable
(remote disabling / controlled disabl. / remote
enabling / cancel non-return time delay)
Off ✓ ✓ ✓ ✓
Input 2: one function optionally assignable
(door contact / skip time delay / time lock
interruption / remote disabling / controlled
disabling / external input event A – F / remote
enabling / cancel non-return time delay)
Off ✓ ✓ ✓ ✓
Output 1: duress alarm On ✓ ✓ ✓ ✓
Output 2: lock open (OR boolean operation
with lock open or motor open or door open)
On ✓ ✓ ✓ ✓
Factory settings / Part 3
Table of contents
Other Dormakaba Lock manuals
Dormakaba
Dormakaba ORACODE 660i User manual
Dormakaba
Dormakaba digital cylinder User manual
Dormakaba
Dormakaba 2725-K6 User manual
Dormakaba
Dormakaba RCI DE8310 V1.6 User manual
Dormakaba
Dormakaba GL10 User manual
Dormakaba
Dormakaba Confidant RFID Kit 2 User manual
Dormakaba
Dormakaba RCI DE8310 User manual
Dormakaba
Dormakaba Axessor CIT User manual
Dormakaba
Dormakaba Cobalt Single User manual
Dormakaba
Dormakaba 5715 Operating and maintenance instructions
Dormakaba
Dormakaba LA GARD 700 Series User manual
Dormakaba
Dormakaba SL30DBL Cobalt Double User manual
Dormakaba
Dormakaba LA GARD ComboGard Pro 39E Manual
Dormakaba
Dormakaba UNIQUIN User manual
Dormakaba
Dormakaba SVI 5000 Training manual
Dormakaba
Dormakaba SVI Series User manual
Dormakaba
Dormakaba 8H Series User manual
Dormakaba
Dormakaba 79 Series Assembly instructions
Dormakaba
Dormakaba Classic User manual
Dormakaba
Dormakaba M Series User manual
