Dormakaba YG80 User manual

QUICK GUIDE FOR OPTIMAL INSTALLATION AND PERFORMANCE

Wiring the lock requires at least three connections; red (Positive), black (Negative), and blue (Control).

Ensure the strike magnet is located at the correct position in the strike for the chosen installation orientation.

Ensure the power supply has the following current available to power the lock when supplied with the following,

2.0A for 24V supply with the heater on, 0.5A for 24V supply with the heater off, and 1.0A for 12V supply with the heater off.

Avoid excessively long thin wires for powering the lock.

Do not mount the lock operating upwards.

While the lid is off, ensure the internals are kept clear of any dust or moisture.

Ensure the lid is tightly and evenly attached back onto the lock body after installation to maintain sealing integrity.

Check the door sag and ensure the correct alignment with the bolt pin and strike.

WARRANTY

The product is covered by a manufacturers’ 12 month warranty against faulty or malfunctioning parts, components, or product. Installing the lock in a way

that will lower the integrity of the sealing characteristics of the lock may void the warranty. At the manufacturers’ discretion, either a replacement lock or

affected part will be supplied to remedy the fault or the lock can be returned at the customers’ expense to the manufacturer for repair. Mistreatment or ill-

use of the lock may void the warranty.

All the materials and components used in the manufacture of this lock comply with the certifications and specifications detailed in the product instructions.

The manufacturer accepts no liability for any failure of this lock as a consequence of:

a) Wear and tear of the materials and components used in the manufacture of the lock;

b) Any failure by the owner/end-user to comply with the maintenance and inspection recommendations set out in the ‘Maintenance and Inspection’

section of the product instructions; and

c) The installation of the product otherwise than in accordance with the product instructions.

MP001511.001

Table of contents

Other Dormakaba Door Lock manuals

Dormakaba

Dormakaba AUDITCON 2 Series User manual

Dormakaba

Dormakaba 143 Series User manual

Dormakaba

Dormakaba MUTO Elock MEM4400 User manual

Dormakaba

Dormakaba BEST Switch Core User manual

Dormakaba

Dormakaba STUDIO Rondo Glass/Glass User manual

Dormakaba

Dormakaba ML530 User manual

Dormakaba

Dormakaba RCI 4 Series User manual

Dormakaba

Dormakaba SAFLOK MT User manual

Dormakaba

Dormakaba PowerPlex 2000 Series User manual

Dormakaba

Dormakaba US 10 User manual

Dormakaba

Dormakaba EML 310 User manual

Dormakaba

Dormakaba 9000DE Series User manual

Dormakaba

Dormakaba SVA 4 Series Training manual

Dormakaba

Dormakaba SVP User manual

Dormakaba

Dormakaba Saffire EVO User manual

Dormakaba

Dormakaba Grange User manual

Dormakaba

Dormakaba SVA 2000 User manual

Dormakaba

Dormakaba Junior User manual

Dormakaba

Dormakaba Saflok SR Series User manual

Dormakaba

Dormakaba Saffire LX-D User manual

Dormakaba

Dormakaba Saffire LX User manual

Dormakaba

Dormakaba STV 50 Series User manual

Dormakaba

Dormakaba MUNDUS PREMIUM US 10 User guide

Dormakaba

Dormakaba Saffire LX User manual

Popular Door Lock manuals by other brands

Assa Abloy

Assa Abloy effeff 827A-IP Mounting instructions

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions