Dormakaba c-lever pro User manual
dormakaba
c-lever pro
Option: TouchGo
HAC Standard fixing - 02/2018
EN
Technical Manual
dormakaba Schweiz AG
Hofwisenstrasse 24
8153 Rümlang
Switzerland
T: +41 (0)44 818 93 11
www.dormakaba.com
dormakaba Schweiz AG
Mühlebühlstrasse 23
8620 Wetzikon
Switzerland
T: +41 (0)44 931 61 11
www.dormakaba.com
dormakaba EAD GmbH
Albertistrasse 3
78056 Villingen-Schwenningen
Germany
T: +49 7720 60 30
www.dormakaba.com
Registered in: Heiligenhaus
Copyright © dormakaba 2018
All rights reserved.
No part of this document may be reproduced or used in any form or by any means without prior written permis-
sion of dormakaba Schweiz AG.
All names and logos of third-party products and services are the property of their respective owners.
Subject to technical changes.
HAC Standard fixing - 02/2018
Technical Manual
3HAC Standard fixing - 02/2018 dormakaba c-lever pro
1 About this document 5
1.1 Validity 5
1.2 Target group 5
1.3 Contents and purpose 5
1.4 Availability of the documents 6
1.5 Supplementary documents 6
1.6 Abbreviations/definition of terms 7
1.7 Hazard categories 8
1.8 Notes 8
1.9 Symbols 8
2 Basic safety instructions 9
2.1 Designated use 9
2.2 Product changes 9
2.3 Assembly and installation 9
2.4 Service and maintenance 9
2.5 ESD prevention measures 10
2.6 Handling of lithium batteries 11
2.7 Escape doors, fire protection, mortise locks 11
3 Product description 12
3.1 Overview 12
3.2 Structure 13
3.3 Scope of delivery 14
3.4 Technical data 16
3.4.1 Dimensions 17
3.4.2 Conformity 18
4 Installation 19
4.1 Installation requirements 19
4.1.1 General 19
4.1.2 Door thickness 19
4.1.3 Mortise lock 19
4.2 Replace c-lever with c-lever pro 19
4.3 Spindle standoff 20
4.4 Drilling fixing holes 20
4.4.1 With drill jig / door side 1 21
4.4.2 With drill jig / door side 2 22
4.4.3 With drilling template / door side 1 23
4.4.4 With drilling template / door side 2 24
4.5 Installing the cylinder support 25
4.5.1 Removing the backplate, swivelling the cover out 25
4.5.2 Inserting the cylinder support 26
4.5.3 Positioning the cylinder support 27
4.5.4 Fitting the cover 27
4.6 Preparing the external fitting 29
4.7 Insert direction pin and spindle 29
4.8 Inserting and connecting the coupling unit 31
4.9 Installing the external fitting 33
4.9.1 Standard fixing 33
4.10 Determining screw length 34
4.11 Preparing the internal fitting 35
4.12 Installing the internal fitting 37
4.12.1 c-lever standard variant 37
4.13 Checking the installation 40
Technical Manual
4 HAC Standard fixing - 02/2018dormakaba c-lever pro
4.14 Dismantling 41
4.14.1 Disassembling the internal fitting 41
4.14.2 Disassembling the external fitting 43
5 Programming 44
5.1 Programming TouchGo products 44
5.2 Initial programming of MRD components 44
5.3 Master media 44
5.4 User media 44
5.5 Program structures 46
5.6 A/B and B structures 46
5.7 Programming user media with B masters 47
5.8 Deleting individual user media 48
5.9 Deleting individual Master Bs 49
5.10 Deleting all user media 50
5.11 INI reset with master media for whitelist and CardLink™ 51
6 Operation 53
6.1 Operating TouchGo products 53
6.2 Opening with user media 53
7 Maintenance 55
7.1 Maintenance table 55
7.2 Cleaning 55
8 Service 56
8.1 Serial number 56
8.2 Replacing batteries 56
8.3 Replacing the TouchGo media battery 58
8.4 Connecting the programmer 59
8.5 Configuration and traceback 60
8.6 Reset (INI reset) 60
8.6.1 Reset with programmer 1460 60
8.6.2 Reset using tweezers 62
8.7 Firmware update 64
8.8 Emergency opening 65
8.8.1 Opening with an external power supply 65
8.9 Replacing the antenna 66
9 Troubleshooting 68
9.1 Error analysis 68
9.2 TouchGo applications error analysis 70
9.2.1 Operation error analysis 70
9.2.2 Programming error analysis 71
10 Disposal / dismantling 72
10.1 Decommissioning / dismantling 72
10.2 Disposal 72
11 Packaging/return 73
11.1 Preparing a device to be returned 73
11.2 Complete devices 73
11.3 Electronic component assemblies 73
11.4 Labelling 73
About this documentTechnical Manual
5HAC Standard fixing - 02/2018 dormakaba c-lever pro
1 About this document
This section contains information for the proper use of this document.
1.1 Validity
This document describes the product:
Product designation: dormakaba c-lever pro
Types: 262...
Variant: Standard fixing
TouchGo option
Product designation: dormakaba c-lever pro
Types: 262y-K6/MRD/E310/HAC
262y-K6/TGO/E110/HAC
Variant: TouchGo
This document describes all product versions and all optional features and functions. Options
are subject to a charge and therefore only available if purchased.
1.2 Target group
This quick start guide is intended for skilled persons only.
The descriptions are intended for skilled persons trained by the manufacturer. The descrip-
tions are no replacement for product training.
For reasons of equipment safety, the installation, maintenance and service measures de-
scribed in this documentation should only be carried out by skilled persons in accordance with
EN 62368-1 (Audio/Video, Information and Communication Technology Equipment – Part 1:
Safety Requirements).
Skilled person is the designation for people who have the appropriate technical training and
experience in setting up the equipment. Skilled persons are expected to use their training and
experience to identify any risks to themselves and others that may arise while carrying out
these activities, and to minimise these risks as far as possible. It is the skilled person’s re-
sponsibility to ensure that the conditions stated by the manufacturer and the applicable regu-
lations and standards are complied with when carrying out these actions.
This documentation is also used to provide information for persons with the following tasks:
• Project planning and project implementation
• Commissioning the product within the network
• Connecting the product to user software by programming customer applications
• Customer-specific adjustments with product parametrisation
1.3 Contents and purpose
The contents of these instructions are limited to the installation, operation, maintenance and
servicing of the product.
About this document Technical Manual
6 HAC Standard fixing - 02/2018dormakaba c-lever pro
1.4 Availability of the documents
Supplementary documentation is available on the Kaba website. Technical manuals can be
found in a secured area of the website.
• Access is only granted after a valid login.
• An account must be set up before logging in for the first time.
Opening login screen:
1. Open your internet browser and go to http://www.kaba.com.
2. Choose your language in the top right-hand corner of the screen.
3. Under 'Products', choose either the 'Access Management' or 'Workforce Management'
product division.
4. In the top right-hand corner of the screen, click on the following symbol:
5. Enter your email address and password to log in or create a new account (see below).
ðThe technical manuals can be found under 'Downloads'.
Creating an account:
1. Click 'Create account'.
2. Fill in the data fields and confirm your entries.
ðA confirmation link will be sent to your email address.
3. Click on the confirmation link in your email to activate your account.
1.5 Supplementary documents
• Programmer 1460 technical manual
• Documentation for the system software used
TouchGo option
• Operating manual for dormakaba TouchGo c-lever
• dormakaba TouchGo system description
About this documentTechnical Manual
7HAC Standard fixing - 02/2018 dormakaba c-lever pro
1.6 Abbreviations/definition of terms
To make this document easier to read, the following short designations are used for the
product designations, as well as the following symbols:
Short designation Product designation
c-lever c-lever pro
Product c-lever pro
Device c-lever pro
Actuator c-lever pro
Programmer Programmer 1460
S-module S-module for c-lever pro
KEM Kaba evolo Manager
MRD Multi RFID device
HAC Handle above cylinder
HBC Handle below cylinder
Symbols
Acoustic signal
Visual signal
About this document Technical Manual
8 HAC Standard fixing - 02/2018dormakaba c-lever pro
1.7 Hazard categories
Instructions with information on what to do and not to do to prevent injury and material
damage are denoted specially.
Please follow all hazard instructions. These are intended to help prevent accidents and pre-
vent damage.
These instructions are divided into the following categories:
CAUTION
Low risk
Denotes a potentially dangerous situation that could lead to minor injury.
NOTICE
Important information on the correct use of the product.
Failure to comply with these instructions could lead to malfunctions. The product and/or ob-
jects in the local vicinity could be damaged.
1.8 Notes
Information is denoted by this symbol.
Tips on using the product are useful pieces of information.
They help to make best use of the product and its functions.
1.9 Symbols
Symbols with the following meanings are used for hazards (depending on hazard source.)
General hazard Hazard from electric shock
Risk of explosion Risk to electronic components from
electrostatic discharge
Basic safety instructionsTechnical Manual
9HAC Standard fixing - 02/2018 dormakaba c-lever pro
2 Basic safety instructions
This product has been built to state-of-the-art standards and in line with established safety
regulations. However, hazards for persons and property may arise when handling the product.
Read and observe the following safety instructions before using the product.
2.1 Designated use
This product is intended for use as specified and explained in the Product description section
only. Any other use is considered non-designated use. The manufacturer is not liable for any
damage or injury due to non-designated use. The user/facility operator is the sole person to
bear risks for non-designated use.
2.2 Product changes
NOTICE
No changes should be made to the product, unless in accordance with changes described in
the instructions.
2.3 Assembly and installation
Check the device for visible damage caused by transport or wrong storage. Do not start up
any damaged device!
Assembly and installation of the product may only be done by skilled personnel (see chapter 1
Target group).
When installing/inserting the product in end-use equipment all requirements of the men-
tioned test standards must be fulfilled.
The product should only be installed in locations which fulfil the environmental and technical
conditions specified by the manufacturer.
The manufacturer is not liable for damage arising due to improper handling or incorrect in-
stallation.
2.4 Service and maintenance
Conversions and modifications to the product may only be done skilled personnel (see chapter
1 Target group). Any conversions and modifications performed by other persons will exempt
us from any liability.
Opening the device will lead to exclusion of all liability and warranty.
This excludes replacing the batteries.
The elimination of faults and maintenance work may only be performed by skilled personnel
(see chapter 1 Target group).
Basic safety instructions Technical Manual
10 HAC Standard fixing - 02/2018dormakaba c-lever pro
2.5 ESD prevention measures
NOTICE
Risk for electronic components due to electrostatic discharge.
Incorrect handling of electronic PCBs or components can result in damage which will cause a
complete breakdown or sporadic errors.
• General ESD prevention measures must be observed when installing or repairing the
product.
• Wear an anti-static wrist strap when handling electronic components. Connect the end of
the strap to a discharge box or a non-painted, earthed metal component. This way, static
discharges are channelled away from your body safely and effectively.
• Handle a PCB along its edges only. Do not touch the PCB or connectors.
• Place dismantled components on an anti-static surface or in an anti-static shielded con-
tainer.
• Avoid contact between PCBs and clothing. The wrist strap protects PCBs against an elec-
trostatic discharge voltage from the body only. However, damage can also be caused by
an electrostatic discharge voltage from clothing.
• Transport and ship dismantled modules in conductive anti-static bags only.
Table of contents
Other Dormakaba Door Lock manuals
Dormakaba
Dormakaba RCI 6 Series User manual
Dormakaba
Dormakaba AUDITCON 2 Series User manual
Dormakaba
Dormakaba RCI 0162 User manual
Dormakaba
Dormakaba Saflok SR Series User manual
Dormakaba
Dormakaba Junior User manual
Dormakaba
Dormakaba 9000DE Series User manual
Dormakaba
Dormakaba SVP User manual
Dormakaba
Dormakaba Saffire EVO User manual
Dormakaba
Dormakaba Rose User manual
Dormakaba
Dormakaba PowerPlex 2000 Series User manual
Dormakaba
Dormakaba Saffire LX-D User manual
Dormakaba
Dormakaba Best Switch Fob User manual
Dormakaba
Dormakaba Confidant RFID User manual
Dormakaba
Dormakaba ED50LE User manual
Dormakaba
Dormakaba E7900 Series User manual
Dormakaba
Dormakaba Saffire LX User manual
Dormakaba
Dormakaba ML530 User manual
Dormakaba
Dormakaba STV 50 Series User manual
Dormakaba
Dormakaba 8300 Series User manual
Dormakaba
Dormakaba RD10 User manual
