Dimplex DFI2309 User manual

Service Manual

23” Insert

Model Numbers:

DFI2309 MOD ~ to D

DFI2310 MOD ~ to D

7400070000R02

In keeping with our policy of continuous product development, we reserve the right to make changes without notice.

Dimplex North America Limited

1367 Industrial Road Cambridge ON Canada N1R 7G8

1-888-346-7539 www.dimplex.com

Rev PCN Date

00 n/a 10.2006

01 12226 08.2010

02 13569 09.2012

Operation......................................................................3

Exploded Parts Diagram..........................................................5

Replacement Parts List...........................................................6

Wiring Diagram .................................................................7

DFI2309 MOD ~ to B.....................................................................7

DFI2309MODCtoD ....................................................................8

DFI2310MOD~ ........................................................................9

DFI2310 MOD A to D....................................................................10

UniversalReplacementProcedures ...............................................11

Partially reective glass Replacement.......................................................11

SwitchReplacement....................................................................11

HeaterAssembly/CutoutReplacement......................................................12

Heater Assembly Replacement ............................................................12

Power Cord Replacement ................................................................13

Model / MOD Specic Procedures .................................................14

LightBulbReplacement .................................................................14

FlickerMotor/FlickerRodReplacement .....................................................15

RemoteReceiverBoardReplacement......................................................16

LightHarnessReplacement ..............................................................17

Log Driver Board Replacement ............................................................18

Troubleshooting Guide ..........................................................20

Table of Contents

Operation

Electric Fireplace Manual Control

The manual controls for the unit are located in the top, right

corner, on the front of the rebox (Figure 1). A switch is in

the On position when the side with the “ I”, or “ II ” markings

on it is pushed in.

This three (3) position switch offers the following functions:

(I) Manual mode

When in the “ I ” position, the replace bypasses the built-

in remote control, the ame effect is turned on and the

electrical supply to the heater is controlled manually using

the Low Heat and High Heat Switches (Figure 1-C and D).

(II) Remote mode

The “ II ” position is for operating the unit with the provided

remote control. When in “ II ” position the unit is operated

with the ON and OFF buttons of the remote control.

!NOTE: Remote control operates main power supply. Heat

must still be controlled by switches on replace.

(O) Off position

All power to all functions are switched off.

Resetting the Temperature Cutoff Switch

Should the replace overheat, an automatic cut out will turn

the heater off and it will not come back on without being

reset. It can be reset by switching the Main Power Switch

(Figure 1-A or B) to the Off (“ O ”) position, and waiting ve

(5) minutes before switching the unit back on.

CAUTION: If you need to continuously reset the heater,

unplug the unit and call Dimplex North America Limited at

1-888-346-7539 for technical support.

Remote Controls

The following plug-in remote control (Figure 2) is included

with the models and MOD levels specied below:

Used in:

DFI2309 MODs ~ to B•

DFI2310 MOD ~•

Figure 1 ABCD CD

Heat Switches (all models, all MOD levels)

Figure 1-C - Low Heat Switch (“ I ”)

The Low Heat On/Off Switch supplies power to the heater fan

and the heater element. When the switch is in the On (“ I ”)

position the heater operates on Low.

Figure 1-D - High Heat Switch (“ II ”)

The High Heat Switch supplies power to the heater fan and

the heater element, when the switch is in the On (“ II ”)

position the heater operates on High. The C - Low Heat

Switch must also be in the On position for the high heat

setting to operate.

!NOTE: If Switches C and D are in the Off position, only

the ame effect will turn on when the power switch is

activated.

Main Power Switches (Figure 1-A & B)

A - On/Off Switch

Used in:

DFI2309 MODs ~ to B•

DFI2310 MOD ~•

The two (2) position On/Off Switch supplies power to all the

replace functions.

B - On/Off/On Switch

Used in:

DFI2309 MODs C to D•

DFI2310 MODs A to D•

Figure 2

OPEN

Receiver outlet

Battery

cover

Plug-in

receiver

On button

Off button

Frequency

Figure 3

Button

Off

Button

Battery Cover

Battery

The remote control has a range of approximately 50 feet

(15.25 m). It does not have to be pointed at the replace

and can pass through most obstacles (including walls). It is

supplied with one of 243 independent frequencies to prevent

interference with other units and the frequency designation is

indicated on the back of the remote control.

Replace battery when needed with a 9 volt battery.

Remote Control Installation

1. Plug replace power cord into the outlet located on the

side of the receiver (Figure 2).

2. Plug receiver into the wall outlet.

3. Remove the plastic tag at the battery cover, to activate the

remote control.

!NOTE: Fireplace Power On/Off Switch (Figure 1-A) must

be in the On (“ I ”) position prior to using the Remote

Control.

ON/OFF Remote Control may be used to control most

other electrical devices including TV’s, stereos and lamps.

CAUTION: For indoor use in dry areas only.

For use on electrical devices with 15 amp resistive load or

1/3 HP inductive load.

120 volt AC only.

!NOTE: The plug-in remote version may include either

the remote control as pictured on page 3 or the remote

control as shown to the right.

The following integrated remote control (Figure 3) is included

with the models and MOD levels specied below:

Used in:

DFI2309 MODs C to D•

DFI2310 MOD A2 to D•

!NOTE: Ensure that the replace’s 3 Position On/Off

Switch (Figure 1-B) is set to the remote control (“ II ”)

setting.

To operate: push ON button to turn replace on; push OFF

button to turn replace off (Figure 3).

!NOTE: Remote control operates main power supply.

Heat must still be controlled by Low Heat and High Heat

switches on replace (Figure 1-C & D).

Battery Installation/Replacement

1. Depress tab on the battery cover on the back of the

remote control and remove battery cover (Figure 3).

2. Properly orient and install one (1) 12 Volt (A23) battery

into the remote control.

3. Replace the battery cover.

Remote Initialization

1. From an power off position, place the 3-Position Switch

(Figure 1-B) into the Remote (“ II ”) position.

2. Within 10 seconds of step 1, press the ON button on the

remote control.

This will synchronize the remote control with the receiver

within the replace.

!NOTE: You will only have 10 seconds to perform the last

step. If this is not completed within 5-10 seconds, the

procedure will have to be repeated.

Exploded Parts Diagram

Replacement Parts List

DFI2309 - Part Number ..................6901470159

DFI2310 - Part Number ..................6901470259

Replacement Parts for both DFI2309, DFI2310 all MODs:

1. Power Cord . . . . . . . . . . . . . . . . . . . . . . . 4100090101RP

2. Heater Assembly . . . . . . . . . . . . . . . . . . . 2200490800RP

3. Cutout . . . . . . . . . . . . . . . . . . . . . . . . . . . 2300270200RP

4. Flicker Motor . . . . . . . . . . . . . . . . . . . . . . 2000220100RP

5. Flicker Rod........................5900340100RP

6. Lampholder . . . . . . . . . . . . . . . . . . . . . . . 4200120100RP

7. Terminal block . . . . . . . . . . . . . . . . . . . . . 4000070100RP

Non-Universal Replacement Parts

8. Log set

DFI2309 MOD ~ to C................0438200200RP

DFI2309 MOD D . . . . . . . . . . . . . . . . . . . 0438200800RP

DFI2310 MOD ~ to D................0439230200RP

9. Partially reective glass

DFI2309 all MODs . . . . . . . . . . . . . . . . . . 5900350100RP

DFI2310 all MODs . . . . . . . . . . . . . . . . . . 5900350200RP

10. 2 Piece Plug-in Remote Control

DFI2309 MOD ~ to B ................680024RPNEW

DFI2310 MOD ~ . . . . . . . . . . . . . . . . . . . 680024RPNEW

11. Integrated Remote Control

DFI2309 MOD C to D . . . . . . . . . . . . . . . 3000370500RP

DFI2310 MOD A to D ................3000370500RP

12. Integrated Remote Control Receiver

DFI2309 MOD C to D . . . . . . . . . . . . . . . 3000380200RP

DFI2310 MOD A to D ................3000380200RP

13. Main Power Switch

DFI2309 MOD ~ to A ............... 2800090100RP*

DFI2309 MOD B . . . . . . . . . . . . . . . . . . . 2800070700RP

DFI2309 MOD C to D . . . . . . . . . . . . . . . 2800071100RP

DFI2310 MOD ~ . . . . . . . . . . . . . . . . . . . 2800070700RP

DFI2310 MOD A to D ................ 2800071100RP

14. Low Heat Switch

DFI2309 MOD ~ to A ............... 2800090100RP*

DFI2309 MOD B to D................2800070900RP

DFI2310 MOD ~ . . . . . . . . . . . . . . . . . . 2800090100RP*

DFI2310 MOD A to D ................2800070900RP

15. High Heat Switch

DFI2309 MOD ~ to A ............... 2800090100RP*

DFI2309 MOD B to D................2800071000RP

DFI2310 MOD ~ . . . . . . . . . . . . . . . . . . 2800090100RP*

DFI2310 MOD A to D ................2800071000RP

16. LED Log Driver (DFI2310 only) ........3000390100RP

Wiring Diagram

DFI2309 MOD ~ to B

Flicker Motor

Lamp holders

Blower

Cutout

Power Cord

Terminal Block

Main

On/Off Switch

Low Heat Switch

High

Heat Switch

Heater Elements

Terminal Block

Wiring Diagram

DFI2309 MOD C to D

Remote

Control

Receiver

Blower

Flicker Motor

Lamp holders

Cutout

Power Cord

Terminal Block

Main On/Off/On

Switch

Low Heat Switch

High

Heat Switch

Heater Elements

Terminal Block

Wiring Diagram

DFI2310 MOD ~

Blower

Flicker Motor

Lamp holders

Cutout

Power Cord

Terminal Block

Main

On/Off Switch

Low Heat Switch

High

Heat Switch

Heater Elements

Terminal Block

LED Log Set

Driver

Wire Harness to

Log Set

Wiring Diagram

DFI2310 MOD A to D

Blower

Flicker Motor

Lamp holders

Cutout

Cord Set

Terminal Block

Main On/Off/On Switch

Low Heat Switch

High

Heat Switch

Heater Elements

Terminal Block

LED Log Set Driver

Wire Harness to

Log Set

Remote

Receiver

Board

Other manuals for DFI2309

This manual suits for next models

Table of contents

Other Dimplex Indoor Fireplace manuals

Dimplex

Dimplex MULTIFIRE DF3015 User manual

Dimplex

Dimplex Rectory REC20R User manual

Dimplex

Dimplex DF2426GB User manual

Dimplex

Dimplex CAS500 User manual

Dimplex

Dimplex BELLINI BLN15W User manual

Dimplex

Dimplex DF2624L-INT User manual

Dimplex

Dimplex Conner CNR15-AU User manual

Dimplex

Dimplex THWG XLF50 User manual

Dimplex

Dimplex Pro Series User manual

Dimplex

Dimplex Vivente VVT775 Instruction Manual

Dimplex

Dimplex BF33STP/DXP User manual

Dimplex

Dimplex DFI2310 User manual

Dimplex

Dimplex DFI2309 Quick start guide

Dimplex

Dimplex BOF4056 User manual

Dimplex

Dimplex BLF7451-EU User manual

Dimplex

Dimplex CAS1000M User manual

Dimplex

Dimplex DWF1215B User manual

Dimplex

Dimplex 690932 Series User manual

Dimplex

Dimplex XHD23L User manual

Dimplex

Dimplex DNV20AB User manual

Dimplex

Dimplex Opti-V PGF10 User manual

Dimplex

Dimplex DVF1200 User manual

Dimplex

Dimplex Indoor Fireplace User manual

Dimplex

Dimplex DWF1215 User manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual