DeLonghi Pacn120hp User manual

ENGLISH

Warnings

•This appliance is designed for home air conditioning and must not be used for other purposes.

•It is dangerous to modify or alter the characteristics of the appliance in any way.

•The appliance must be installed in conformity with legislation in force in the country concer-

ned.

•If the appliance requires repair, contact a Service Centre authorised by the manufacturer only.

Repairs carried out by unauthorised personnel may be dangerous.

•This air conditioning unit must be used by adults only. Never allow children to play with the

appliance.

•The appliance must be connected to an efficient earth system. Have your electrical circuit

checked by a qualified electrician.

•The appliance must not be used by young children or unfit persons without adequate super-

vision.

•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

•Do not use extension cables.

•Before cleaning or maintenance operations, always unplug the appliance from the mains

socket.

•Do not move the appliance by pulling the power cable.

•Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near sources

of heat.

•Do not rest heavy or hot objects on top of the appliance.

•Clean the dust filter at least once a week.

•Avoid using heating appliances near the air conditioning unit.

•Always transport the appliance upright or resting on one side, with short movements only. Befo-

re moving the appliance, empty the condensate pan in the indoor unit and the base of the

outdoor unit.

After moving the appliance, wait at least 1 hour before starting it.

•The materials used for packaging can be recycled. You are therefore recommended to dispo-

se of them in special differentiated waste collection containers.

•The refrigerant gas R410A conforms to EC regulations on the environment.

Avoid perforating the refrigerant circuit of the appliance. At the end of its working life, consi-

gn the appliance to a special collection centre.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTI-

VE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste.

It must be taken to a special local authority differentiated waste collection centre or to a dealer providing

this service.

Disposing of a household appliance separately avoids possible negative consequences for the envi-

ronment and health deriving from inappropriate disposal and enables the constituent materials to be

recovered to obtain significant savings in energy and resources.As a reminder of the need to dispo-

se of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

During the summer, you feel comfortable at a temperature of between 24 and 27°C with a

relative humidity of about 50%.

An air conditioning unit removes excess moisture and heat from the room where it is located.

Compared with installed models, portable air conditioning units have the advantage that they

can be moved from one room to another in the home or be transported from one building to

another.

Hot air from the room is passed through a coil cooled by refrigerant gas. Excess heat and moistu-

re are removed before the air is re-emitted into the room.

In packaged models, a small part of this air is used to cool the refrigerant gas and then, when hot

and damp, is discharged outside.

In split models, the circuit is cooled using air from the outside.

All air conditioners can also be used in fan-only mode.

DESCRIPTION OF THE APPLIANCE

1 Indoor unit

2 Indoor unit handle

3 Cold air outlet grille

4 Operating status indicator LED

5 Filter

6 Air intake grille

7 Power cable

8 Button for emptying the pan

9 Connection sheath

10 Castor wheels

11 Outdoor unit

12 Outdoor unit handles

13 Air outlet grille

14 Red light (Heating/dehumidifying function)

15 Yellow light (fan function)

16 Green light (air-conditioning/dehumidifying function)

17 Manual operation button

18 Remote control receiver

19 Condensate drenage connection

20 Suckers

21 Castor locks

22 Protection cover

23 Wall fixing brackets

24 Supplementary extension for quick-fit couplings

What is the Pinguino ?

ENGLISH

Preparing for use

NOTE: The appliance must be positioned at

least 20/30cm from any walls.

POSITIONING THE INDOOR UNIT

Install the appliance inside the room being air-

conditioned. In general, near a window or

door. In any case, near a perimeter wall. The

indoor unit must be positioned on an even sur-

face, where possible on a table, or other piece

of furniture (see Figures 1 and 2). There must

be no obstructions to the air intake (rear grilles

)and outlet (top outlet grille ) on the

indoor unit.

POSITIONING THE CONNECTION SHEATH

The sheath connecting the outdoor and

indoor units can be passed through the gap in a

window or door left ajar; use the suckers to

prevent them from opening further. In addition

to the methods described above, the sheath

connecting the external and internal units can

also pass through a hole with a diameter of

about 9 cm in an external wall.

The internal unit can be mounted permanently

using the bracket accessory (see mounting

instructions provided with the bracket kit).

fig. 1

fig. 2

Before passing the sheath through the hole

in the wall, you should protect the ends of

the quick-fit coupling using the caps provi-

ded or with paper tape.

The external unit can also be mounted perma-

nently by purchasing the wall bracket kit from a

De'Longhi service centre or dealer.

DISCONNECTING THE TWO UNITS

To disconnect the internal and external units,

proceed as follows:

1) Undo the two screws on the cover protec-

ting the external unit couplings. (Fig. 3)

2) Remove the protection from the electrical

connections on the external unit by

undoing the screw. (Fig. 4)

This should always be done with the

appliance unplugged from the mains.

3) Disconnect the condensate coupling by

pushing on the sleeve Aand pulling the

tube out. (Fig. 5)

fig. 5

fig. 3

fig. 4

4) Undo the right hand screw on the cable

clip. (Fig. 6)

5) Disconnect the electrical connector by

pushing the tabs B, then pulling out the

connector (fig. 7)

6) Remove the safety plug (fig. 8).

7) Open the locking lever on the quick-fit

coupling. To facilitate closing, use the

extension , fitting it onto the lever and

turning until fully open (see figure 9).

8) Disconnect the male and female cou-

plings by pushing the sleeve backwards

and pulling (Fig. 10).

To avoid damage to the couplings, before

passing the sheath through the hole in the

wall, you should protect the ends of the

quick-fit coupling using the caps provided or

with paper tape (Fig. 11).

Make sure the connecting sheath is free of

kinks.

Important

Always disconnect or connect the quick-fit

couplings in the open air or adequately ven-

tilated rooms.

Preparing for use

fig. 8

fig. 6

fig. 7

fig. 9

fig. 10

fig. 11

ENGLISH

Always lock the 2 outer wheels using the

castor locks supplied.

The manufacturer is not liable for any dama-

ge to people or things caused by the positio-

ning of the unit in a manner not compliant

with the basic standards of safety.

Preparing for use

HOW TO CONNECT THE SHEATH

To connect the sheath, follow the above pro-

cedure in reverse. When connecting the

water drain hose, make sure it is pushed in as

far as it will go.

POSITIONING THE OUTDOOR UNIT

The outdoor unit can be placed on a terrace

or balcony (Fig. 12).

The outdoor unit can also be installed on a

window sill, if this faces onto a balcony (Fig.

13)

fig. 12

fig. 13

fig. 14

The outdoor unit may be installed above or at

the same level as the indoor unit, provided

that the difference in level is not greater than

1.5m. The air intake and outlet of the outdoor

unit must be kept clear of obstacles. Leave at

least 6cm between the wall and the rear of

the appliance.

The condensate forming during operation in

air-conditioning mode (in summer) is almost

totally eliminated via evaporation from the

outdoor unit.

In particular cases, if there is excessive humi-

dity, the condensate is drained through a

hole in the base.

To drain the water that forms, use the con-

densate drain connector supplied, which

must be fitted on the base of the outdoor unit

(see Figure 14). This can then be connected

to a rubber hose

Note: If appropriate, the external unit can be

protected with the protective cover fixing

it with the screw provided. The outdoor unit

should be protected from the sun, rain, snow

and drips from the roof.

BUTTONS AND INDICATORS ON THE INDOOR UNIT

MANUAL

OPERATION

BUTTON

RED

LIGHT

SIGNAL RECEIVER

OF THE REMOTE CONTROL

INDICATOR LIGHTS

These turn on according to the function selected or indicate any operating anomalies.

ANOMALY RED LIGHT YELLOW LIGHT GREEN LIGHT

ALARM flashing flashing flashing

FUNCTION RED LIGHT YELLOW LIGHT GREEN LIGHT

OFF ---

AIR-CONDITIONING --on

DEHUMIDIFYING on -on

FAN -on -

see “troubleshooting” on page 32

MANUAL OPERATION

This operating mode is to be used only when the remote control is inoperative (broken, lost, flat

batteries).

Press the manual operation button until selecting the desired function (air-conditioning, dehumi-

difying, fan, heating, smart, off).

Refer to the indicator lights and the table above to identify the mode selected.

For each mode selected, the appliance will automatically choose the optimum values for maxi-

mum comfort.

This appliance is fitted with a safety system that prevents the compressor from starting until at least

3 minutes have elapsed since it last went off.

Buttons and indicators on the indoor unit

GREEN

LIGHT

YELLOW

LIGHT

HEATING on --

PUMP BUTTON

ENGLISH

The remote control

THE REMOTE CONTROL

Inserting the batteries

•Remove the protective cover (see figure).

•Insert two new batteries (not rechargea-

ble) making sure the (+) and (-) are in the

correct positions.

•Replace the cover.

NB: Alkaline batteries should be used (LR03).

When replacing or disposing of the remote

control, the batteries must be removed and

disposed of according to the legislation in

force, being harmful to the environment.

Warning:

Do not mix old and new batteries. Do not mix

alkaline, standard (carbon-zinc) or rechar-

geable (nickel-cadmium) batteries.

Do not dispose of batteries in fire. batteries

may explode or leak.

If the remote control is not be used for a cer-

tain length of time, remove the batteries.

CORRECT USE

•Aim the remote control at the signal recei-

ver on the air-conditioner.

•Maximum distance: around 7 metres

(without obstacles between the remote

control and the receiver).

•The remote control should be handled

with extreme care and respect: without

dropping it, without exposing it to direct

sunlight or near sources of heat.

Description of the remote control

THE REMOTE CONTROL

E D C

SWING FAN

THE DISPLAY

Signal transmission

Air-conditioning indicator

Dehumidifying indicator

Fan indicator

Heating indicator

SUPER indicator

SMART indicator

SLEEP indicator

Automatic fan speed

High fan speed

Medium fan speed

Low fan speed

Used to set the temperature in SMART

mode or the level of dehumidification.

Low

High

Low

High

Low

High

Low

High

Low

High

Low

High

A. MODE button

Selects the operating mode (air conditio-

ning, dehumidifying, fan and heating).

B. Buttons for SETTING THE ROOM TEMPERATU-

Set room temperature or program the

timer.

C. FAN button

Sets fan speed to automatic, high,

medium or low in sequence.

D. SWING button (not enabled on this model)

E. TIMER button

Sets or cancels the timer.

F. SLEEP button ( )

Sets or cancels the automatic SLEEP func-

tion.

G. SMART button ( )

When this button is pressed, the appliance

automatically establishes the most suita-

ble operating mode for maximum

comfort.

H. SUPER button ( )

Starts or stops rapid cooling (in the rapid

cooling mode, the fan operates at high

speed with the temperature automatical-

ly set to 18°C).

I. STAND-BY button

Press this button to turn the appliance on

and off. NB: the settings are displayed

even when the air conditioner is off.

Low

High

Low

High

Low

High

ENGLISH

Functions

AIR-CONDITIONING MODE

•Press the button to turn the appliance on.

•Press the MODE button a number of times until the air-conditio-

ning symbol appears on the display.

•Now set the temperature using the buttons.

•To select fan speed, press the FAN button repeatedly until the

required fan speed is selected (automatic, high, medium, low).

NB: in air-conditioning mode, the appliance automatically removes

excess moisture from the atmosphere.

DEHUMIDIFYING MODE

•Activate this function when humidity is high.

•Press the button to turn the appliance on.

•Press the MODE button a number of times until the dehumidifying

symbol appears on the display.

•Press the button to increase the level of dehumidification and

the button to reduce it.

•In dehumidifying mode, fan speed is selected by the appliance

automatically.

FAN MODE

On not particularly hot days, the fan function alone may be ade-

quate.

•Press the button.

•Press the MODE button a number of times until the fan symbol

appears on the display.

•Once fan mode has been selected, press the FAN button until

the required speed is reached (low, medium, high).

Functions

HEATING MODE

•Press the button to turn the appliance on.

•Press the MODE button a number of times until the heating sym-

bol appears on the display.

•Now set the temperature using the buttons.

•To select fan speed, press the FAN button repeatedly until the

required fan speed is selected (automatic, high, medium, low).

SMART MODE

In SMART mode, the air-conditioning unit decides the best way to

operate to guarantee maximum comfort.

•Press the button to turn the appliance on.

•Press the SMART button. The appliance functions automatically

and the symbol appears on the display.

NB: in SMART mode, the temperature is controlled automatically.

However, if the required temperature has not yet been reached, it

can be reduced or increased by a maximum of 2°C by pressing the

buttons.

The appliance automatically establishes the operating mode (air-

conditioning, fan, heating) and the optimum fan speed.

As SMART is an automatic mode, SLEEP and internal fan speed can-

not be selected even if they appear on the remote control display.

AUTOMATIC SLEEP MODE

The automatic SLEEP mode is ideal for the night-time as it enables

operation of the air-conditioning unit in any of the modes (air-con-

ditioning, dehumidifying, heating) to be gradually reduced until it

shuts down completely (after eight hours).

To select SLEEP mode, proceed as follows:

•Press the button to turn the appliance on.

•Press the MODE button a number of times until the symbol of the

function required appears on the display.

•Then select the required temperature by pressing the but-

tons.

•Now press the SLEEP button to set the night function. The sym-

bol is displayed. Press the SLEEP button again to go back to the

previous mode. In this mode, the fan operates at low speed.

The SLEEP function maintains the room temperature at the optimum level, avoiding

excessive increases or drops in the temperature, with silent operation.

The flow of air decreases, while the room temperature is varied gradually accor-

ding to the comfort requirements: increases of 1°C after 60 minutes and 2°C after 2

hours (it switches off altogether after eight hours).

This manual suits for next models

Table of contents

Other DeLonghi Air Conditioner manuals

DeLonghi

DeLonghi PAC 29ECO User manual

DeLonghi

DeLonghi CF 1130 User manual

DeLonghi

DeLonghi Arctic Whisper EL Series User manual

DeLonghi

DeLonghi C Series User manual

DeLonghi

DeLonghi PACT 40 User manual

DeLonghi

DeLonghi PACEX120SILENT User manual

DeLonghi

DeLonghi Pinguino PAC26Super User manual

DeLonghi

DeLonghi PAC N130HPE User manual

DeLonghi

DeLonghi ONE On-Off 7K Specification sheet

DeLonghi

DeLonghi AN Series User manual

DeLonghi

DeLonghi PAC N130HPE User manual

DeLonghi

DeLonghi AN Series User manual

DeLonghi

DeLonghi Pinguino PACEL110ERFWIFI User manual

DeLonghi

DeLonghi PACAN135EWSLG User manual

DeLonghi

DeLonghi PAC AN140HPECB User manual

DeLonghi

DeLonghi DD40P User manual

DeLonghi

DeLonghi Pinguino Air-to-Air PAC EX130 User manual

DeLonghi

DeLonghi W SERIES User manual

DeLonghi

DeLonghi PAC WE125 User manual

DeLonghi

DeLonghi Pinguino CT300H User manual

DeLonghi

DeLonghi PACT 90ECO User manual

DeLonghi

DeLonghi PAC 29 ECO Instruction manual

DeLonghi

DeLonghi Pinguino FX140ECO User manual

DeLonghi

DeLonghi AIR CONDITIONER User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual

DeLonghi pacn120hp User manual

Popular Air Conditioner manuals by other brands