DeLonghi PACT 40 User manual

Warnings

•This appliance is designed for home air conditioning and must not be used for other purposes.

•It is dangerous to modify or alter the characteristics of the appliance in any way.

•The appliance must be installed in conformity with legislation in force in the country concerned.

•If the appliance requires repair, contact a Service Centre authorised by the manufacturer only.

Repairs carried out by unauthorised personnel may be dangerous.

•If the power cable is damaged, it must be replaced by a qualified professional authorised by the

manufacturer only.

•The appliance is not intended for use by young children or infirm persons without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

•The appliance must be connected to an efficient earth system. Have your electrical circuit checked

by a qualified electrician.

•Do not use extension cables.

•Before cleaning or maintenance operations, always unplug the appliance from the mains socket.

•Do not move the appliance by pulling the power cable.

•Do not install the appliance in rooms containing gas, oil or sulphur. Do not install near sources of heat.

•Do not rest heavy or hot objects on top of the appliance.

•Clean the anti-microbial filters at least once a week.

•Avoid using heating appliances near the air conditioning unit.

•Always transport the appliance upright or resting on one side.

Before transporting the appliance, completely empty the internal circuit of water by turning the

function selector to the PUMP position until you hear the gurgling of the pump.

•Use the appliance as described in this instruction manual only. As with all electrical equipment, whil-

st the instructions aim to cover as many eventualities as possible, caution and common sense

should be applied when operating and installing this appliance.

•At the end of its working life, take the appliance to a special collection centre.

•The materials used for packaging can be recycled. You are therefore recommended to dispose of

them in special differentiated waste collection containers.

•When putting the appliance away, do not cover with plastic bags.

•R407 is a refrigerant gas conforming to EC environmental regulations. Avoid perforating the refrige-

rant circuit of the appliance.

•Keep the appliance at least 50 cm away from flammable substances (alcohol etc) or pressurised

containers (e.g. aerosol cans).

•If the appliance is used in rooms without adequate ventilation, take the necessary precautions to

avoid possible leaks of refrigerant gas stagnating in the atmosphere, creating a fire risk.

•This appliance must be used and kept in rooms with a volume of more than 21 m2.

•If an appliance containing flammable refrigerant is used in an unventilated room, make sure the

room is suitable and that there is no danger of gas leaks reaching a concentration which could

cause fire or explosion in the presence of other heat sources (electrical heating appliances, heaters

or similar).

DESCRIPTION

1Control panel

2Air outlet grille

3Evaporator air intake grill

4Housing for air exhaust hose

5Condenser air intake grill

6Continuous condensate drain connection

7Condensate tank

8Power cable

9Castors

10 Handles

11 Air conditioning light

12 Dehumidification light

13 Fan light

14 Function selector

15 Thermostat dial

16 Timer

17 Tank full/tank absent light

18 Alarm light

19 Power on light

20 Flange cap

21 Air exhaust hose

22 Window outlet

23 Suckers

24 Castor locks

25 Continuous drain hose with coupling

GB-5751013500 27-07-2006 18:10 Pagina 14

ENGLISH

During the summer, you feel comfortable at a tem-

perature of between 24 and 27° C with a relative

humidity of about 50%.

An air conditioning unit removes excess moistu-

re and heat from the room where it is loca-

ted.

Compared with installed models, porta-

ble air conditioning units have the

advantage that they can be moved

from one room to another in the home

or transported from one building to

another.

Hot air from the room is passed throu-

gh a coil cooled by refrigerant gas.

Excess heat and moisture are remo-

ved before the air is re-emitted into

the room.

In single unit models (Pinguino), a

small part of this air is used to cool the

refrigerant gas and then once hot

and moist, is discharged outside.

In models with case (SuperPinguino),

the circuit is cooled using air from outsi-

de.

All Pinguino and SuperPinguino models

can also be used in fan-only mode.

What are the Pinguino and SuperPinguino?

GB-5751013500 27-07-2006 18:10 Pagina 15

AIR-CONDITIONING WITHOUT INSTALLATION

Just a few simple steps and your comfort is

ensured with Pinguino:

•Fix the air discharge hose in the housing

at the back of the appliance. Insert it as

shown in figure A.

•If you have a double window, use the

suckers provided to hold the two parts of

the window together (fig. C).

•Fit the window outlet to the end of the

hose .

•Place the air conditioning unit near a win-

dow or French window.

•Make sure the air exhaust hose is unob-

structed.

•Open the window or French window sligh-

tly and position the outlet as shown in

figure B.

Preparing for use

ELECTRICAL CONNECTIONS

Before plugging the appliance into the mains socket, check that:

•the mains power supply corresponds to the value indicated on the rating plate on the back of

the appliance;

•the mains socket and electrical circuit are adequate for the appliance;

•the mains socket matches the plug. If this is not the case, have the plug replaced;

•the mains socket is adequately earthed. Failure to follow these important safety instructions

absolves the manufacturer of all liability.

The power cable must be replaced by a qualified professional only.

The instructions below will enable you to prepare your air conditioning unit for operation as effi-

ciently as possible.

Before use, make sure the air intake and outlet grilles are unobstructed.

Keep air hoses as short and free of curves as

possible to avoid constrictions.

GB-5751013500 27-07-2006 18:10 Pagina 16

ENGLISH

Preparing for use

AIR-CONDITIONING WITH INSTALLATION

If required, the Pinguino can also be installed

semi-permanently.

Proceed as follows:

•Drill a hole in an outside wall or through a

window pane. Respect the height and

dimensions of the hole given in figure E-F.

30 cm

106

MAX100 cm

MIN 35 cm

Whenever the hose is not fitted, the hole

can be closed with the flange cap .

Note:

When installing the air conditioning unit semi-

permanently, you should leave a door slightly

open (as little as 1 cm) to guarantee correct

ventilation.

DEHUMIDIFYING

Place the appliance in the room without fit-

ting the hose. The dehumidified air will thus be

released directly into the atmosphere.

Cold air will come out of the front grill and hot

air from the back grill (fig. G), thus guaran-

teeing efficient dehumidifying.

In addition to the air exhaust hose , a

second hose is available as an accessory to

take air from outside rather than inside the

room.

in the window

pane

in the wall: you are

recommended to

insulate the sec-

tion of wall using

suitable insulation.

in the woo-

den socle of

a French win-

dow

Keep air hoses as short and free of curves as

possible to avoid constrictions.

•Fit the flange accessory provided in

the hole

hot air

cold air

•Attach the hose to the special housing

in the back of the appliance (fig. Apage

16).

•Fit the end of the hose to the flange

as shown in fig. F.

GB-5751013500 27-07-2006 18:10 Pagina 17

Turning on and selecting the functions

HOW TO USE AS AN AIR CONDITIONER

When the air conditioning unit is off, the func-

tion selector is in the “●●” position. To use the

unit in air conditioning mode, proceed as fol-

lows:

1. Turn the function selector knob clockwise:

•When the large crystal symbol is lined

up with the reference mark on the

appliance, the unit will operate in air con-

ditioning mode at maximum fan speed.

•When the small crystal symbol is lined

up with the reference mark on the

appliance, the unit will operate in air con-

ditioning mode at minimum fan speed

2. Choose the required temperature by tur-

ning the room thermostat dial.

Note

The temperature is not indicated in degrees.

We therefore suggest you turn the room ther-

mostat dial to the maximum cold position.

When the temperature in the room is comfor-

table, turn the thermostat slowly anticlockwi-

se until the thermostat trips and turns the air

conditioning off.

This will programme the appliance to the

exact level of comfort which will then be

automatically maintained by the thermostat,

at the same time guaranteeing considerable

energy savings. Whenever the air conditioner

reaches the required temperature, it conti-

nues to operate in fan only mode.

THIS APPLIANCE USES AN EXCLUSIVE CON-

DENSATE RECYCLING SYSTEM TO ELIMINA-

TE EXCESS MOISTURE.

IN NORMAL CONDITIONS, CONDENSATE IS

ELIMINATED AUTOMATICALLY.

WHEN HUMIDITY IS HIGH, THERE MAY BE

EXCESS CONDENSATE IN THE TANK. INDI-

CATOR LIGHT COMES ON AND YOU

SHOULD EMPTY THE TANK.

MAKE SURE YOU PUT THE TANK BACK COR-

RECTLY OR INDICATOR LIGHT WILL

REMAIN ON.

HOW TO USE AS A FAN

If you want to use the appliance as a fan

only, turn the function selector anti-

clockwise to the symbol.

HOW TO USE AS A DEHUMIDIFIER

When the appliance is operating in air condi-

tioning mode, it automatically reduces excess

moisture in the air, while at the same time lowe-

ring room temperature.

If you want to remove excess moisture without

lowering the temperature, remove the air

exhaust hose and turn the function selector

anticlockwise to the symbol.

Note

In dehumidifying mode, the air coming out of

the air discharge grill is colder than the air in

the room while the air coming out of the hose

housing at the back of the appliance is

hotter.

GB-5751013500 27-07-2006 18:10 Pagina 18

ENGLISH

Mode selection/indicator lights

TURNING THE APPLIANCE OFF

TO TURN THE APPLIANCE OFF COMPLETELY, TURN THE FUNCTION SELECTOR TO THE "O" POSITION

AND UNPLUG FROM THE MAINS.

THERE MAY BE A SLIGHT DELAY BETWEEN TURNING THE SELECTOR AND START-UP OF THE MODE SELEC-

TED.

OPERATING INDICATOR LIGHTS

The lights indicate operation of the unit.

*The light comes on three minutes after the appliance has been turned on (when the com-

pressor starts operating). It goes off when the temperature set by the thermostat has been rea-

ched.

** The light comes on three minutes after the appliance has been turned on (when the com-

pressor starts operating).

In air conditioning mode, the appliance operates continuously. If the temperature is too low,

the frost prevention thermostat trips and turns off operation.

MODE INDICATOR

LIGHT 11

INDICATOR

LIGHT 13

OFF --

AIR CONDITIONING on* off

DEHUMIDIFYING off off

FAN -on

INDICATOR

LIGHT 12

off

on**

GB-5751013500 27-07-2006 18:10 Pagina 19

To get the best from your air conditioning unit,

follow these recommendations:

•close the windows and doors in the room to

be air conditioned. The only exception is

when the appliance is installed through a

hole in the wall.

In this case, you are recommended to

leave a slight draught through a door or

window to guarantee correct ventilation.

•Protect the room from direct exposure to

the sun by partially closing curtains and/or

blinds. This makes the appliance more

economical to run;

•Never rest objects of any kind on the air

conditioning unit;

•Never obstruct the air intake or outlet

grilles;

•Make sure there are no heat sources in the

room.

•Never use the appliance in very damp

rooms (laundries for example).

•Never use the appliance outdoors.

Tips

close doors and windows

close blinds or curtains

do not cover

•Make sure the air conditioning unit is on a

level floor. If necessary, place the two

castor locks under the front wheels

GB-5751013500 27-07-2006 18:10 Pagina 20

ENGLISH

Before cleaning or maintenance, always turn

the appliance off and unplug from the mains

socket.

CLEANING THE CABINET

You should clean the appliance with a slightly

damp cloth then dry with a dry cloth. For

safety reasons, never wash the air conditio-

ning unit with water.

Precautions

Never use petrol, alcohol or solvents to clean

the appliance. Never spray insecticide liquids

or similar.

CLEANING THE AIR FILTERS

To keep your air conditioning unit working effi-

ciently, you should:

Clean the dust filter every week of operation

The filter is housed in the intake grille.

To clean the filter, proceed as follows:

1. Remove the intake grille by rotating

outwards (fig. L).

Use a vacuum cleaner to remove dust accu-

mulations from the filter. If it is very dirty,

immerse in warm water and rinse a number of

times. The water should never be hotter than

40°C.

After washing, leave the filter to dry.

To replace, put the filters back in the intake

grille then attach the intake grille to the

appliance.

START OF SEASON CHECKS

Make sure the power cable and plug are

undamaged and the earth system is efficient.

Follow the installation instructions precisely.

END OF SEASON OPERATIONS

To empty the internal circuit completely of

water, turn the function selector to the PUMP

position until you hear the gurgling of the

pump. Do not remove the tank.

The water in the internal circuit will drain into

the tank or through the continuous drain

hose if connected.

Make sure the other end of the hose leads to

a drain.

When completely drained, disconnect the

continuous drain hose.

Clean the filters and dry thoroughly before

putting back.

2. Remove the dust filter by detaching it from

the grille (figure M).

intake grille

Cleaning

dust filter

GB-5751013500 27-07-2006 18:10 Pagina 21

Troubleshooting…

PROBLEM CAUSE RIMEDY

The air conditioning

unit is off

•no electricity

•it is not plugged into the mains

•the safety device has tripped

•wait

•plug into the mains

•contact your service centre

The air conditioning

unit works for a

short time only

•the exhaust hose has a constriction

•the exhaust hose is blocked

•there are bends in the exhaust hose

•position the exhaust hose cor-

rectly

•check there are no obstacles

obstructing air discharge

•eliminate the bends

The air conditioning

unit works, but does

not cool the room

•window open

•there are heat sources in the room (radiators,

lamp, etc)

•the exhaust hose is detached

•air filters clogged

•the air conditioning unit is not powerful enou-

gh for the conditions or size of the room

•close the window

•eliminate the heat source

•connect the exhaust hose

•clean or replace the filters

Particular odour in

the room

•air filters clogged

The air conditioning

unit does not ope-

rate for about three

minutes after turning

it on

•the safety device has tripped • wait for three minutes

The tank full light

is on

•The condensate tank is full or positioned

incorrectly

•empty the tank or position it

correctly. If the light remains

on, contact a service centre

The alarm light

flashes

18 •temperature sensor fault •Contact a Service Centre.

The alarm light

is on

18 •pump fault •Contact a Service Centre.

GB-5751013500 27-07-2006 18:10 Pagina 22

ENGLISH

Guarantee/technical specification

GUARANTEE AND TECHNICAL ASSISTANCE

The conditions of the guarantee and techni-

cal assistance are given on the certificate

supplied with your appliance.

LIMIT CONDITIONS

Room temperature 21 ÷ 35°C

Transport, filling, cleaning, recovery and disposal of refrigerant should be performed by a tech-

nical service centre appointed by the manufacturer only.

The appliance should be disposed of by a specialist centre appointed by the manufacturer only.

TECHNICAL SPECIFICATION

Power supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .see rating plate

Max. absorbed power during air conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .“

Max. absorbed power during dehumidifying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .“

Refrigerant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .“

Cooling capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .“

Dimensions internal unit:

width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .495 mm

height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .940 mm

depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .410 mm

weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 kg

ELECTRICAL CONNECTION (U.K. ONLY)

A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should

be cut off from the mains lead, and on appropriate plug fitted, as below. warning: Very carefully dispose of the cut off

plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard.

With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-

on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the

event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nea-

rest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.

B) If your appliance is not fitted with a plug, please follow the instructins provided below:

WARNING - THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with

the following code:

Green and yellow Earth

Blue Neutral

Brown Live

As the colours of the wires in the mains lead may not corre-

spond with the coloured markings identifying the terminals

in your plug, proceed as follows:

The green and yellow wire must be connected to the termi-

nal in the plug marked with the letter E or the earth symbol

or coloured green or green and yellow.

The blue wire must be connected to the terminal marked with

the letter N or coloured black.

The brown wire must be connected to the terminal marked

with the letter L or coloured red.

GB-5751013500 27-07-2006 18:10 Pagina 23

This manual suits for next models

Table of contents

Other DeLonghi Air Conditioner manuals

DeLonghi

DeLonghi PAC N Series User manual

DeLonghi

DeLonghi Pinguino K900 User manual

DeLonghi

DeLonghi Pinguino F120ECO User manual

DeLonghi

DeLonghi PAC 29ECO User manual

DeLonghi

DeLonghi Pinguino CF 210 User manual

DeLonghi

DeLonghi Pinguino CT300H User manual

DeLonghi

DeLonghi Pinguino PAC26Super User manual

DeLonghi

DeLonghi Pinguino FX140ECO User manual

DeLonghi

DeLonghi AIR CONDITIONER User manual

DeLonghi

DeLonghi Pinguino T90 User manual

DeLonghi

DeLonghi EV100 User manual

DeLonghi

DeLonghi Pinguino FX160ECO User manual

DeLonghi

DeLonghi PAC WE125 User manual

DeLonghi

DeLonghi AN125HPEK User manual

DeLonghi

DeLonghi ONE On-Off 7K Specification sheet

DeLonghi

DeLonghi Pinguino PAC 160 User manual

DeLonghi

DeLonghi Pinguino PAC L10 User manual

DeLonghi

DeLonghi DD40P User manual

DeLonghi

DeLonghi PAC N130HPE User manual

DeLonghi

DeLonghi PAC W130E User manual

DeLonghi

DeLonghi PACAN97 User manual

DeLonghi

DeLonghi EL275 Series User manual

DeLonghi

DeLonghi Pinguino F14 User manual

DeLonghi

DeLonghi AN Series User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual