Dell PowerVault NX3500 User manual

Other manuals for PowerVault NX3500

7

Table of contents

Languages:

Other Dell Server manuals

Popular Server manuals by other brands

HP

HP AlphaServer ES47 Cli reference manual

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started

Planet

Planet NAS-7410 user manual

Lenovo

Lenovo ThinkSystem SR635 V3 user guide

Fujitsu

Fujitsu PRIMERGY BX900 quick start guide

Asus

Asus RS700DA-E6 PS4 user manual

Dell PowerVault NX3500

Systems

Getting Started With

Your System

系统使用入门

Memulai Pengaktifan dengan Sistem Anda

はじめに

시스템 시작 안내서

Dell PowerVault NX3500

Systems

Getting Started With

Your System

Regulatory Model: E07S Series,

DELL500WLV, and DELL500WHV

Notes, Cautions, Warnings, and Danger

NOTE:

A NOTE indicates important information that helps you make better use of

your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage,

personal injury, or death.

DANGER:

A DANGER indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

____________________

Information in this publication is subject to change without notice.

© 2011 Dell Inc.; Eaton Corporation. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

and Eaton Corporation is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc.

Intel

®

and Xeon

®

are registered trademarks of Intel Corporation in the U.S. and other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Regulatory Model: E07S Series, DELL500WLV, and DELL500WHV

January 2011 P/N PT6XC Rev. A00

Getting Started With Your System

3

Installation and Configuration

DANGER:

Observe the following instruction to help prevent an imminently

hazardous situation which, if not avoided, will result in death or serious injury:

The backup power supply contains LETHAL VOLTAGES. All repairs and service

should be performed by AUTHORIZED SERVICE PERSONNEL ONLY. There are

NO USER SERVICEABLE PARTS inside the backup power supply.

WARNING:

Before performing the following procedure, review the safety

instructions that came with the system.

Unpacking the Solution

Unpack the solution and identify each item.

Installing the Rails, the System, and the Backup Power Supply in a Rack

Assemble the rails and install the system and backup power supply (BPS) in the

rack. Follow the safety instructions and the rack installation instructions

provided with the solution.

4

Getting Started With Your System

Connecting the Battery in the BPS Power Module

Removing the Power Module Front Cover

On the right side of the front cover, slide the latch to the left to retract the latch

hook. This hook secures the front cover to the right side of the chassis. Pull the

right side of the front cover from the chassis. Slide the front cover to the right to

disengage the hook. This hook secures the front cover to the left side of the chassis.

Getting Started With Your System

5

Removing the Battery

Pull the battery out of the power module.

Rotating the Battery

Rotate the battery 180° so the blind mate connector faces toward the back of

the power module chassis.

NOTE:

Ensure that the arrow on the yellow label is pointing up.

6

Getting Started With Your System

Reinserting the Battery

Align the battery with the power module and reinsert the battery. Ensure that

the battery is fully seated in the power module. If the battery is not fully

inserted into the power module, the battery front cover will not close properly.

NOTE:

Always connect the battery pack before connecting the power cable.

NOTE:

You will not observe the blind mate connectors as they plug into the

receptacle in the back of the power module, but a small amount of arcing may

occur when connecting the battery pack. This is normal and does not damage the

unit or present any safety concern.

Getting Started With Your System

7

Securing the Power Module Front Cover

WARNING:

For safety, always attach the power module front cover as soon as the

battery pack is inserted and connected.

WARNING:

Align the front cover carefully before securing it to the power

module. For safety, do not allow the power module front cover to come in contact

with the battery pack.

On the left side of the first front cover, insert the hook into the open slot on the

left side of the chassis. On the right side of the front cover, slide the latch to the

left to retract the latch hook. Push the right side of the front cover forward to

the chassis. Release the latch to set the hook into the open slot on the right side

of the chassis.

8

Getting Started With Your System

Inserting the Power Modules

Insert the power modules into the chassis module bay with the back panels

toward the back of the chassis.