Dell PowerEdge C6320 User manual

Other manuals for PowerEdge C6320

7

Table of contents

Languages:

Other Dell Server manuals

Popular Server manuals by other brands

HP

HP AlphaServer ES47 Cli reference manual

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started

Planet

Planet NAS-7410 user manual

Lenovo

Lenovo ThinkSystem SR635 V3 user guide

Fujitsu

Fujitsu PRIMERGY BX900 quick start guide

Asus

Asus RS700DA-E6 PS4 user manual

Dell PowerEdge C6320

Getting Started Guide

Příručka Začínáme

Guide de mise en route

Handbuch zum Einstieg

Οδηγός «Τα πρώτα βήματα»

Instrukcja uruchomienia

Руководство по началу работы

Priručnik za početak rada

Guía de introducción

Başlangıç Kılavuzu

הדובע תליחת ךירדמ

Scan to see how-to videos, documentation,

andtroubleshooting information

Dell PowerEdge C6320

Getting Started Guide

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss

of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

Dell End User License Agreement

Before using your system, read the Dell Software License Agreement that shipped with your

system. If you do not accept the terms of agreement, see Dell.com/contactdell.

Save all software media that shipped with your system. These media are backup copies of the

software installed on your system.

Copyright © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and

international copyright and intellectual property laws. Dell™and the Dell logo are trademarks of

Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned

herein may be trademarks of their respective companies.

2016 – 01

P/N CFK9F Rev. A01

Installation and configuration │5

CAUTION: Restricted Access Location

This server is intended for installation only in restricted access locations as defined in

Cl. 1.2.7.3 of IEC 60950-1: 2001 where both these conditions apply:

• Access can only be gained by service persons or by users who have been

instructed about the reasons for the restrictions applied to the location and

about any precautions that shall be taken.

• Access is through the use of a tool or lock and key, or other means of security,

and is controlled by the authority responsible for the location.

Installation and configuration

WARNING: Before performing the following procedure, read and follow the

safety instructions that came with the system.

Installing the tool-less rail solution

WARNING: Whenever you need to lift the system, get others to assist you.

To avoid injury, do not attempt to lift the system by yourself.

WARNING: To avoid a potential electrical shock hazard, a third wire safety

grounding conductor is necessary for the rack installation. The rack

equipment must provide sufficient airflow to the system to maintain proper

cooling.

CAUTION: When installing rails in a square-hole rack it is important to ensure

that the square pegs slide through the square holes.

NOTE: The rails can be used in both square-hole racks (item 1 in the following

figure) and round-hole racks (item 2 in the following figure).

6 │Installation and configuration

1. To open the rail latches, push the latch release buttons on the midpoints of the

end pieces of the rails. See

1

in figure 1.

2. Align the end pieces of the rails on the vertical rack flanges to seat the pegs in

the bottom and top holes of the desired U spaces. See

2

in figure 1.

Figure 1: Pushing the latch release buttons

3. To lock the latches in place, engage the end of the rails until they seat on the

vertical rack flanges, and release the latch release buttons. See

3

in Figure 2.

Figure 2: Releasing the latch release buttons

12

1

1

2

2Back View

Latch Release Button

Front View

3

3

Back View

Front View

Installation and configuration │7

4. Slide the system into the rack. See

4

in Figure 3.

5. Tighten the thumbscrews to secure the rack ears to the rack flanges. See

5

in

Figure 3.

Figure 3: Installing the chassis onto the rack

NOTE: To remove the rails, push the latch release button on the midpoints

of the end piece and unseat each rail.

5

5

4

Back View

Front View

8 │Installation and configuration

Installing the optional chassis stabilizer

shipping brackets

1. At the back of each vertical rack flange, put two screw bases into the two

square holes above the rail. See

6

in Figure 4.

2. Install the optional chassis stabilizer shipping brackets on the rack flanges.

See

7

in Figure 4.

3. Install and tighten the screws. See

8

in Figure 4.

NOTE: To transport systems already installed in the rack, ensure that the two

chassis stabilizer shipping brackets are in place.

Figure 4: Installing the chassis stabilizer shipping brackets

6

7

8

Back View

Installation and configuration │9

Optional — Connecting the keyboard, mouse,

and monitor

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable to

plug into each connector. Be sure to tighten the screws (if any) on the monitor’s

cable connector.

NOTE: Note that the system supports only one USB port and a micro USB port. If

you require more than one USB outlet at a time, use USB Hub or Adapter Cable.

10 │Installation and configuration

Connecting the power cable(s)

Connect the system’s power cable(s) to the system, and if a monitor is used,

connect the monitor’s power cable to the monitor. Plug the other end of the power

cables into a grounded electrical outlet or a separate power source such as an

uninterrupted power supply or a power distribution unit.

NOTE: The system supports both AC and HVDC power inputs and up to

two1400 W power supply units (200-240 VAC nominal input voltage) or up to

two 1600 W power supply units (200-240 VAC nominal input voltage).

1400 W power supply unit is supported only for China.