Dell PowerApp .cache 100 Technical manual

This manual suits for next models

1

Table of contents

Other Dell Server manuals

Dell

Dell EMU01 User manual

Dell

Dell PowerEdge 1800 Manual

Dell

Dell PowerEdge C5230 User manual

Dell

Dell POWEREDGE SC1430 User manual

Dell

Dell PowerEdge C410X User manual

Dell

Dell PowerEdge 2500 User manual

Dell

Dell PowerEdge M1000e Quick start guide

Dell

Dell PowerApp 220 User manual

Dell

Dell Wyse 7030 User manual

Dell

Dell PowerEdge R520 Quick start guide

Dell

Dell Poweredge metered User manual

Dell

Dell PowerEdge 2550 User manual

Dell

Dell PowerEdge FC830 User manual

Dell

Dell PowerEdge C6320 User manual

Dell

Dell PowerEdge C1100 User manual

Dell

Dell PowerEdge 2410 User manual

Dell

Dell 6100 Installation instructions

Dell

Dell POWER EDGE SC1430 User manual

Dell

Dell PowerEdge 2500 User manual

Dell

Dell EMC PowerEdge C4140 Manual

Dell

Dell PowerEdge R415 User manual

Dell

Dell PowerEdge R7615 Manual

Dell

Dell PowerEdge C6220 II User manual

Dell

Dell Olympus O-T400 Manual

Popular Server manuals by other brands

HP

HP AlphaServer ES47 Cli reference manual

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started

Planet

Planet NAS-7410 user manual

Lenovo

Lenovo ThinkSystem SR635 V3 user guide

Fujitsu

Fujitsu PRIMERGY BX900 quick start guide

Asus

Asus RS700DA-E6 PS4 user manual

















This document updates information contained in your Dell PowerApp™ system and service

documentation.

If you replace the PowerApp appliance’s system board, you must also restore the system configura-

tion settings using the SMBIOS program on the diskette or CD provided with the new system board.

In addition, this document provides important information for reinstalling the microprocessor and

heat sink on the new system board.

For details on replacing the system board, see “Replacing the System Board” in your Service

Manual.



To restore the system configuration settings, perform the following steps:

1. Insert the configuration diskette or CD provided with the new system board, and turn on the

computer.

The computer boots from the diskette or CD and prompts you to select the type of system you

are servicing.

2. When prompted, enter the system type and enter the service tag number, which is located on

the back of the computer.

The program notifies you when programming is complete.

3. Remove the diskette or CD and reboot the computer.

4. When the system reboots, press <F2> to enter the system setup program.

5. From the Main Menu, enter the correct time and date in the System Time and System Date

options.

6. Set the Processor Serial Number option to “Disabled.”

7. Press <F10> to save these settings, exit the system setup program, and reboot the system.



To install the microprocessor and heat sink on the new system board, perform the following steps:

1. Using the cleaning cloth supplied with the new system board, wipe the top of the microproces-

sor die to remove any previous thermal grease.

Once cleaned, the microprocessor die should have a reflective shine.

2. Insert the microprocessor into the ZIF socket on the new system board and lower the lever to

lock it into place.

3. Peel off the protective backing (if present) from the enclosed replacement heat sink to expose

the pad of thermal grease.

4. Place the heat sink on the microprocessor and ensure that the bevel on the heat sink covers the

raised portion of the ZIF socket.

5. Replace the heat sink clip onto the heat sink and secure it on the ZIF socket.

The longest side of the clip should be pointing to the front of the appliance.

____________________

Information in this document is subject to change without notice.

© 2000 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.

Trademarks used in this text: Dell, the DELL logo, and PowerApp are trademarks of Dell Computer Corporation. Other trademarks and

trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer

Corporation disclaims any proprietary interest in trademarks and trade names other than its own.