Dell D90D7 User manual

Installation Guide

Dell®Wyse D Class, Wyse X Class, and Wyse Z Class

Flash Upgrade Option Kit

Products: D90D7, D90DW, X90m7, X90mw, Z90D7, Z90S7, Z90DE7, Z90DW,

Z90SW

Issue: 031214

PN: 883884-31L Rev. C

This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit,

transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this

publication without express written permission.

End User License Agreement (“License”)

A copy of the End User License Agreement is included in the software and provided for your reference only.

The License at http://www.wyse.com/license as of the purchase date is the controlling licensing agreement. By

copying, using, or installing the software or the product, you agree to be bound by those terms.

Trademarks

The Dell and Wyse logos and Wyse are trademarks of Dell Inc. Other product names mentioned herein are for

identification purposes only and may be trademarks and/or registered trademarks of their respective

companies. Specifications subject to change without notice.

You acknowledge that the Software is of U.S. origin. You agree to comply with all applicable international and

national laws that apply to the Software, including the U.S. Export Administration Regulations, as well as

end-user, end-use and country destination restrictions issued by U.S. and other governments. For additional

information on exporting the Software, see http://www.microsoft.com/exporting.

Ordering Information

For availability, pricing, and ordering information in the United States and Canada, call 1-800-438-9973 or visit

us at Dell.com. In all other countries, contact your sales representative.

Contents

1 Introduction 1

Kit Contents 1

Kit Warranty 1

Overview 1

Dell Technical Support 2

Related Documentation and Services

Fact Sheets containing the features of hardware products are available on the Dell Web

site. Go to http://www.wyse.com/products and use the Cloud clients tab to locate and

download the Fact Sheet for your hardware product.

Administrator and other documentation for your cloud client model are available at:

http://www.wyse.com/manuals.

Dell Online Community

Dell maintains an online community where users of our products can seek and

exchange information on user forums. Visit the Online Community forums at:

http://community.wyse.com/forum.

2Installing D Class Flash

This chapter contains information for users of Wyse D class thin clients who must

install new flash.

Requirements

•Small Phillips screwdriver

WARNING: Flash modules may be susceptible to damage by Electro-Static Discharge

(ESD). All industry-standard cautions should be followed to avoid ESD. Before you

remove or install a module, touch any metal part of the chassis and keep that contact

with the chassis during the installation process.

Procedures

CAUTION: Follow all precautions listed in the Quick-Start Guide that came with your

thin client for disconnecting and reconnecting the thin client.

1. Perform a proper shutdown of the thin client by closing all files and ending your

session, and then pressing the power button to turn off the thin client.

2. Unplug the power cord and power adapter, and remove any other cables from the

thin client, and detach the vertical foot.

3. Position the thin client horizontally, where the Wyse logo-side with four flat screws

is facing downward. Using the Phillips Screwdriver, remove the three screws from

the cover along the back panel edge as shown in Figure 1.

Figure 1 Removing the cover screws

4Chapter 2

4. Place your thumbs on the top surface of the opposite end where the three screws

were removed. With a continuous motion, push firmly downward and towards the

back panel (pushing down unlatches the hooks under the cover). The cover will

shift approximate 1/4 inch to hang over the back panel. (a) Grasp the overhanging

cover edge and raise the edge about 1-1/2 inches, and then (b) pull the cover out

towards the back panel at the same angle to free the opposite end of the cover from

the remaining hooks, as shown in Figure 2.

Figure 2 Removing the cover

5. Remove the cover to expose the main-board shield.

Figure 3 Main-board shield

6. Using the Phillips Screwdriver, remove the five screws from the main-board shield

(four corner screws and one screw mid-way along the front edge). Remove the

main-board shield and unplug the speaker wire (red wire) to expose the main board

and Flash module as shown in Figure 4.

WARNING: Flash modules may be susceptible to damage by Electro-Static

Discharge (ESD). All industry-standard cautions should be followed to avoid ESD.

Before you remove or install a module, touch any metal part of the chassis and keep

that contact with the chassis during the installation process.

Installing D Class Flash 5

Figure 4 Main board and Flash module

7. Remove the existing flash module. Locate the flash module and use the Phillips

Screwdriver to remove its retaining screw as shown in Figure 5. Lift the flash module

out of the socket.

Figure 5 Removing the existing flash module

8. Install the new flash module in the reverse order of removing the original flash

module. Carefully screw down its retaining screw until it is secure.

9. Replace the speaker wire (plug in red wire) and the main-board shield (five screws).

10.Replace the cover in the reverse order as described in step 4 (align the cover screw

tabs with the screw holes and slide the cover toward the front of the thin client).

11., Attach the cover screws in the reverse order as described in step 3.

12.Connect the power cord and power adapter, attach any other cables to the thin

client, and then attach the vertical foot.

CAUTION: Do not turn on the thin client. The thin client is ready to re-image,

however the flash module does not contain an operating system. Turning on power

to your thin client without firmware will display the error message “NO OPERATING

SYSTEM FOUND.”

13.Continue with "Installing Firmware."

6Chapter 2

This page intentionally blank.

This manual suits for next models

Table of contents

Other Dell Server manuals

Dell

Dell PowerEdge 300 Reference guide

Dell

Dell PowerEdge R830 User manual

Dell

Dell Precision FX100 User manual

Dell

Dell DR4000 Restore Manager How to use

Dell

Dell IP4700 Installation and maintenance instructions

Dell

Dell EMC ScaleIO Ready Node 14G Manual

Dell

Dell PowerVault DL4000 User manual

Dell

Dell Wyse 5060 User manual

Dell

Dell POWER EDGE SC1430 User manual

Dell

Dell PowerEdge 4600 User manual

Dell

Dell PowerEdge 6400 User manual

Dell

Dell POWEREDGE DL385 User manual

Dell

Dell DSS 2500 User manual

Dell

Dell OptiPlex 9020 User manual

Dell

Dell POWEREDGE R515 Instructions for use

Dell

Dell PowerEdge T610 User manual

Dell

Dell PowerEdge 1650 Technical manual

Dell

Dell PowerEdge R220 Quick start guide

Dell

Dell PowerEdge 6450 Technical manual

Dell

Dell PowerEdge T105 Systems User manual

Dell

Dell PowerEdge E02B User manual

Dell

Dell Wyse Latitude 3480 User manual

Dell

Dell PowerEdge R760xs Manual

Dell

Dell PowerEdge T110 II User manual

Popular Server manuals by other brands

HP AlphaServer ES47 Cli reference manual

PowerNAS

PowerNAS CMA quick start guide

Supero

Supero FatTwin F617R3-FT user manual

MSI

MSI P1-109N-L70 user manual

EtroVISION

EtroVISION EV3151 user manual

NEC

NEC Express5800/T110j System configuration guide

HP ProLiant Gen9 user guide

Compaq

Compaq ProLiant 3000 Maintenance and service guide

iRobo

iRobo IPC2U user manual

Nortel

Nortel 1000 Con?guration guide user manual

Asus

Asus AP7500 Hardware reference guide

Avid Technology

Avid Technology AirSpeed 5000 manual

HP Integrity rx2600 overview

Milestone

Milestone Husky IVO 350T Getting started

Planet

Planet NAS-7410 user manual

Lenovo

Lenovo ThinkSystem SR635 V3 user guide

Fujitsu

Fujitsu PRIMERGY BX900 quick start guide

Asus

Asus RS700DA-E6 PS4 user manual