11. Wipe the seal opening and surroundings clean using iso-
propyl alcohol and a lint free cloth.
INSTALLING THE CLEARSEAL™ADHESIVE
12. Make sure that the new seal is being placed in its proper
position (shown) before applying.
NOTE: Optional UniNet Clear Seal™universal adhesive for use
in Dell C 5100 OEM BK/C/M/Y toner cartridges (UniNet part
#10353).
13. Remove the adhesive backing of the Clearseal™and care-
fully place over the opening as shown. Apply pressure using
your fingers to ensure a tight seal.
14. gently wrap the seal flap around the toner fill opening (as
shown) while you prepare to insert the cartridge. This will
ensure that the seal flap properly exits the opposite end of the
container.
UNINET IMAGING INC. •BROTHER 1240/1650 •ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. •BROTHER 1240/1650 •DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. •DELL C 5100 CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Summit Technologies is a division of UniNet Imaging Inc.
www.uninetimaging.com
USA •UK •EUROPE •AFRICA •JAPAN •CHINA •BRAZIL •MEXICO •COLOMBIA •ARGENTINA •VENEZUELA
11
12
4
Washingt
on
Blvd.,
Culver
City
,
CA
,
U.S.A.
90232
•Ph
+1
3
10
280
9620
•Fx +1 310 838 7294 •techsuppor[email protected]
