Danfoss Devireg 535 User instructions

Setting up your Devireg 535 programmable thermostat with

your devimat system

Devireg 535

Selection of sensor type

Power on the thermostat

With the front oﬀ, with

a small screwdriver

or pencil press the

installation button.

Select the ﬂoor sensor

To change the default setting, press

land use the arrow buttons  to

select your choices. Press lto accept

your choice.

Press for the next setting.

Maximum ﬂoor temperature.

- Tiles on timber based ﬂoor = 29°C

- Tiles on concrete based ﬂoor = 40°C

- Timber covered ﬂoors = 27°C

(parquet etc. - Please check with

ﬂoor supplier).

To change this setting, press land

use the arrow buttons  to select

your choice. Press lto accept your

choice.

Press for the next setting.

Scale

When selecting Celsius, the display

will show the actual temperature at

the ﬂoor sensor.

To change this setting, press land

use the arrow buttons  to select

your choice.

Press lto accept your choice.

The installation procedure is now ﬁnished.

You can use the  for going back or forward through

the settings, otherwise:

Press the installation pinhole to exit

installation mode.

Put the frame and front back on.

You enter the settings by pressing the

pinhole with a small screw driver,

pencil, the display now changes from

temperature to time display.

By pressing the l, the hours starts

ﬂashing - you can now change them

with the .

Press the lagain to change the

minutes with the .

To ﬁnish, press lthen 

Setting the time

Setting the weekday

Mon Tue Wed Thu Fri Sat Sun

By pressing the l, the weekday starts

ﬂashing - you can now change them

with the .

Press the lto accept.

To ﬁnish press 

Setting the timer periods

The ﬁrst period bar ﬂashes

indicating this is the morning period.

By pressing the l, the start time of

the period starts ﬂashing. You can

change it with the arrow buttons

 in increments of 15 minutes.

Press the lto accept.

The second (day), third (evening) and

fourth (night) period bars are set as

mentioned above.

Setting the comfort temperature

By pressing the l, the preset comfort

temperature starts ﬂashing.

You can change it with the arrow

buttons 

Press lto accept, then press 

Setting the set back temperature

(second and fourth period)

By pressing the l, the preset comfort

temperature starts ﬂashing, normally

this is set to OFF.

You can change it with the arrow

buttons 

Press lto accept.

Then press the pinhole with a

small screwdriver or pencil.

Changing timer program

To change the program:

Keep the lbutton pressed for 2

seconds.

The actual program starts to flash.

It is now possible to change the

program by using the buttons 

Press the lto accept.

P1 - Manual mode

On constantly 24 hours 7 days a week

at set temperature.

Set temperature - twice a day.

Set temperature all day.

Set temperature Monday - Friday

twice a day.

Saturday - Sunday all day.

Part no.: 001v01 28.06.10

Other Danfoss Thermostat manuals

Danfoss

Danfoss 088U0212 User manual

Danfoss

Danfoss WP75-RF User manual

Danfoss

Danfoss DEVIreg Touch User manual

Danfoss

Danfoss MBC 8000 User manual

Danfoss

Danfoss RT 106 User manual

Danfoss

Danfoss DEVIreg Touch User manual

Danfoss

Danfoss ECL Comfort 310 User manual

Danfoss

Danfoss Icon Master User manual

Danfoss

Danfoss living connect User manual

Danfoss

Danfoss HC75-3 Operating manual

Danfoss

Danfoss LX205T User manual

Danfoss

Danfoss FH-CWD User manual

Danfoss

Danfoss REPI Series User manual

Danfoss

Danfoss TP7000 Series User manual

Danfoss

Danfoss RTW-RA User manual

Danfoss

Danfoss TP5000 RF Si User manual

Danfoss

Danfoss HC75-1 Operating manual

Danfoss

Danfoss Icon Master User manual

Danfoss

Danfoss ECtemp 531 User manual

Danfoss

Danfoss Eco User manual

Danfoss

Danfoss RET2001RF User manual

Danfoss

Danfoss RA 2000 valve User manual

Danfoss

Danfoss TPOne-M User manual

Danfoss

Danfoss ECtemp Next Plus User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide