Danfoss EKA 183A User manual

520H10102

Installation Guide

EKA 183A with Adaptor for ERC21x Controllers

Programming guide

DKRCC.EI.RL0.I2.02 / 520H10102 | 1© Danfoss | DCS (az) | 2015.05 Installation guide | EKA 183A

Components:

ERC 21x Controller EKA 183A Adaptor with cable assembly

Ordering Number: 080G9740

Pack Contents: EKA 183A, Adaptor with cable assembly

PC settings:

Refer to the specic documentation (DKRCC.PD.R1.06.02) for further details.

Instruction for connecting to controller:

Step 1 Step 2

Connect EKA 183A to Adaptor Connect Adaptor cable with the controller

2 |DKRCC.EI.RL0.I2.02 / 520H10102 © Danfoss | DCS (az) | 2015.05Installation guide | EKA 183A

Programming the controller:

EKA 183A is used to copy settings to an ERC21X controller.

It can also be used to copy settings from one ERC controller to another ERC controller of the same type, eg. the same

software version.

Programming steps:

EKA 183A is inserted into the controller.

The controller is connected to the electricity mains.

Steps Illustration Observations and actions

1- ashes

(checking) YELLOW

The LED will ash YELLOW when the programming is

inserted into the controller. Here it is checked whether the

data can be transferred

2 - light up constant

(await press) YELLOW

Shortly afterwards, the LED constant light up YELLOW and

the data transfer can start

3 - to write to the

controller or

to write to the

programming key

GREEN

RED

~ 1 sec

~ 4 sec

- Pressing the button on the top of EKA (1 sec) will transfer

data from the programming key to the controller

(GREEN LED ashes)

- Pressing the button on the top of EKA (4 sec) will transfer

data from the controller to the programming key

(RED LED ashes)

4 - light up constant

(transfer nished) CONSTANT

GREEN

The transfer has nished when the LED light up constant

green

Flashing red-green-red-green-red-green....... = fault.

If there is a fault indication, please check code no.,

SW version and Error code.

Refer to Technical brochure (DKRCC.PD.R1.06.02) for

more details

Note: refer to the speciﬁc documentation (DKRCC.PD.R1.06.02) for further details

Data Transfer:

Two methods (Mode A or Mode B) can be selected for transferring data. Modes may vary based on product and

connected device as in below table.

The default mode is set as ”Mode B”, which can be used for ERC 21X series only.Refer to specic documentation

(DKRCC.PD.R1.06.02) for step by step process to change the Mode for ERC 10X and ERC 11X Series.

Product Type Mode Setting for Programming Key

Plugged in Doking Station Connected to ERC product directly

ERC 10X Series Mode A Not applicable

ERC 11X Series Mode A Not applicable

ERC 21X Series Not applicable Mode B

Other Danfoss Controllers manuals

Danfoss

Danfoss AME 55QM User manual

Danfoss

Danfoss AME 110 NL User manual

Danfoss

Danfoss VLT HVAC Basic Drive FC 101 User manual

Danfoss

Danfoss 51 Series User manual

Danfoss

Danfoss CF-MC User manual

Danfoss

Danfoss ECL Comfort C31 User manual

Danfoss

Danfoss AME 110 NL User manual

Danfoss

Danfoss MCD 201 Guide

Danfoss

Danfoss VLT FC Series Spare Brake IGBT User manual

Danfoss

Danfoss VLT Compact Starter MCD 201 User manual

Danfoss

Danfoss AK-PC 560 User manual

Danfoss

Danfoss ECL Comfort 300 User manual

Danfoss

Danfoss EIM 365 User manual

Danfoss

Danfoss PVED-CLS User guide

Danfoss

Danfoss ECL Comfort 300 User manual

Danfoss

Danfoss ERC 112D VSC User manual

Danfoss

Danfoss AMD 610 AS User manual

Danfoss

Danfoss 101N0715 User manual

Danfoss

Danfoss ERC 214 User manual

Danfoss

Danfoss Old ICAD 600 series User manual

Danfoss

Danfoss EKC 414A User manual

Danfoss

Danfoss PVE 4 Series User manual

Danfoss

Danfoss AME 55QM User manual

Danfoss

Danfoss AK-CC 550B User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual