Danfoss AMV 25 User manual

ED.95.R9.02 © Danfoss 03/2014

DEN-SMT/SI

Actuators for three point control

AMV 25, AMV 35

Data sheet

Description

AMV electric actuators are used with, VRB, VRG,

VF, VL valves with additional adapter

(Code No.

065Z0311, not supplied) and VFS 2 valves up to

DN 50 diameter.

The actuator automatically adapts its

stroke to valve end positions which reduces

commissioning time. Optional auxiliary switches,

feedback potentiometer and valve stem heater

are available.

The actuator has some special features:

• Theadvanceddesignincorporatesload

related ‘switch-oﬀ’ to ensure that actuators

and valves are not exposed to overload;

• Digitalefeedbackendpositionindication

signal for valve end position is available by

terminal 4 or 5;

• Lowweightandrobust;

Main data:

• Nominalvoltage:

- 24 VAC, 50 Hz/60 Hz

- 230 VAC, 50 Hz/60 Hz

• Controlinputsignal:

3 point

• Force:450N

• Stroke:15mm

• Speed:15 s/mm

•Max. medium temperature: 150 °C

•End-position signals

Ordering Actuators

Type Supply voltage Code No.

(VAC)

AMV 25 230 082G3024

AMV 25 24 082G3023

AMV 35 230 082G3021

AMV 35 24 082G3020

Accessories

Type Code No.

Additional switch (2×) 082H7015

Additional switch (2×)

and potentiometer (10 kΩ) 082H7016

Additional switch (2×)

and potentiometer (1 kΩ) 082H7017

Adapter for VFS 2 valves DN 15-50

(for media temp. over 150 °C) 065Z7548

Stem heater (for valves DN 15-50) 065B2171

Adapter for valves VRB/VRG/VF/VL (2009)

DN 15-50 065Z0311*

* Need to be ordered separately.

Technical data

Type AMV 25 AMV 35

Power supply V 24 AC, 230 AC; +10 to –15 %

Power consumption VA 2 7

Frequency Hz 50/60

Control input 3-point

Closing force N1000 600

Max. stroke mm 15

Speed by 50 Hz (60 Hz) s/mm 11 (8, 8) 3 (2,4)

Max. medium temperature

°C

150 (200 - with adapter or mounted horizontally)

Ambient temperature 0 … 55

Storage and transport temperature –40 … 70

Grade of enclosure IP 54

Weight kg 1,55

- marking in accordance with standards Low Voltage Directive 73/23/EEC,

EMC-Directive 2006/95/EEC: EN 60730-1, EN 60730-2-14

2ED.95.R9.02 © Danfoss 03/2014 DEN-SMT/SI

Tmax≤150°C for AMV 25, 35

and VFS

Adapter for VFS

(Code No.065Z7548)

≈5o≈5o

Tmax = 200°C for AMV 25, 35

and VFS

Tmax≤150°C for AMV 25, 35

and VRB, VRG, VF and VL

Data sheet Actuators for three point control AMV 25, AMV 35

Installation

Mechanical

Use 4 mm Allan key (not part of actuator

delivery) to mount actuator on the valve.

Installation of the valve with the actuator is

allowed in horizontal position or upwards.

Installation downwards is not allowed.

The actuator must not be installed in an

explosive atmosphere, at ambient temperature

lower than 0 °C or at ambient temperature higher

than 55 °C. It must not be subject to steam jets,

water jets or dripping liquid as well.

Note: the actuator may be rotated up to 360° with

respect to the valve stem by loosening the retaining

ﬁxture. Once the actuator is placed, retighten the

ﬁxture.

Electrical

Electrical connections can be accessed by

removing the actuator cover. Two cable gland

entries with thread (M20 x 1.5 and M16 x 1.5) are

prepared for cable glands.

Note: Cable and cable gland used must not

compromise the actuator’s IP rating, and must

ensure the connectors are fully strain relieved.

Please observe local rules and regulations as well.

Disposal The actuator must be dismantled and the

elements sorted into various material groups

before disposal.

ED.95.R9.02 © Danfoss 03/2014

DEN-SMT/SI

230V

Data sheet Actuators for three point control AMV 25, AMV 35

Wiring

230 Vac version:

Do not touch anything on

the PCB! Lethal voltage!

Terminals 1, 3:

Control voltage input from the controller.

Power supply 24 V~, 230 V~ (dependent on type)

Terminals 4, 5:

Output used for position indication or

monitoring.

Neutral/Common (0 V)

Additional switches (2×)

Additional switches (2×) and potentiometer

Accessories

Commissioning Complete the mechanical and electrical

installation and perform the necessary checks

and tests:

- Turn on the power.

- Set the appropriate control signal and

check that the valve stem direction is correct

for the application.

The unit is now fully commissioned.

Manual override The manual override is achieved by turning the

manual knob to the required position.

Observe the direction of rotation symbol.

• Disconnectcontrolsignals

• Pressrubberbutton

• Adjustvalvepositionusingthecontrolknob

• Setvalvetoclosedposition

• Restorecontrolsignals.

4ED.95.R9.02 Produced by Danfoss A/S © 03/2014

Actuator - valve

combinations

AMV 25, AMV 35 +

Adapter (065Z0311)

VF 2, VF 3 (DN 15-50)

VL 2, VL 3 (DN 15-50)

AMV 25, AMV 35 +

Adapter (065Z0311)

VRB 2, VRB 3 ext. thread (DN 15-50)

VRG 2, VRG 3 ext. thread (DN 15-50)

AMV 25, AMV 35 +

Adapter (065Z0311)

VRB 2, VRB 3 Int. thread

(DN 15-50)

AMV 25, AMV 35 +

VFS 2 (DN 15-50)

Adapter 065Z0311

for VRG, VRB, VF, VL (DN 15-50)

Dimensions

Adapter 065Z7548

for VFS (DN 15-50)

for media temperatures over 150 oC

Data sheet Actuators for three point control AMV 25, AMV 35

This manual suits for next models

Other Danfoss Controllers manuals

Danfoss

Danfoss VLT AQUA Drive FC 202 User manual

Danfoss

Danfoss AK-CC 550B User manual

Danfoss

Danfoss ERC 214 User manual

Danfoss

Danfoss ADAP-KOOL Drive User manual

Danfoss

Danfoss VLT 6000 series User manual

Danfoss

Danfoss EKC 102B User manual

Danfoss

Danfoss EKC 361 User manual

Danfoss

Danfoss VLT AutomationDrive FC 300 Guide

Danfoss

Danfoss EKC 368 User manual

Danfoss

Danfoss EKC 319A User manual

Danfoss

Danfoss NovoCon S 003Z8504 User manual

Danfoss

Danfoss EKC 331T User manual

Danfoss

Danfoss ERC 213 User manual

Danfoss

Danfoss ERC 112D User manual

Danfoss

Danfoss FC 300 User manual

Danfoss

Danfoss FP975 User manual

Danfoss

Danfoss AK-PC 781A User manual

Danfoss

Danfoss VLT 5000 User manual

Danfoss

Danfoss VLT AQUA Drive FC 202 User manual

Danfoss

Danfoss AME 55QM User manual

Danfoss

Danfoss VLT Micro Drive User manual

Danfoss

Danfoss ThermoControl-3 Installation instructions manual

Danfoss

Danfoss AME 140X User manual

Danfoss

Danfoss VLT AutomationDrive FC 360 Operating instructions

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual