Danby DPA120UB1WDB Assembly instructions

2014.12.04

Danby Products Limited, Guelph, ON, Canada N1H 6Z9

Danby Products Inc., Findlay, Ohio, USA 45840

MODEL • MODÈLE

DPA120CB1WDB / DPA120UB1WDB

DPA140CB1WDB / DPA140UB1WDB

PORTABLE AIR CONDITIONER

CLIMATISEUR PORTATIF

• OWNER’S USE AND CARE GUIDE

• GUIDE D’UTILISATION ET D’ENTRETIEN

DO NOT RETURN THIS UNIT TO THE RETAILER

WITHOUT FURTHER INSTRUCTIONS

Dear valued customer, we hope your Danby product purchase fulfills all

your requirements. Your satisfaction is our priority!

Please contact us at our toll free consumer service number for any inquiries

you may have about your new unit.

NE PAS RETOURNER CET APPAREIL CHEZ LE

DÉTAILLANT SANS CONSIGNES SUPPLÉMENTAIRES

Cher(ère) client(e) important(e), nous espérons que votre produit Danby

répond à tous vos besoins. Votre satisfaction est notre priorité!

Veuillez nous contacter au numéro gratuit de service après-vente, si

vous avez des questions quelconques à propos de votre nouvel appareil.

NO DEVUELVA ESTA UNIDAD A LA TIENDA SIN

INSTRUCCIONES ADICIONALES

Estimado cliente, esperamos que el producto Danby que ha comprado

satisfaga completamente sus necesidades. Su satisfacción

es nuestra prioridad!

Por favor, contáctenos gratuitamente a nuestro número de Servicio al

Cliente para cualquier pregunta que tenga sobre su nuevo electrodoméstico.

1-800-263-2629

(1-800-26-DANBY)

Danby 28.08.2014

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must

be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and

applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to exchange the existing receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. The third ground prong should not,

under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been checked and test-

ed by a qualiﬁed electrician or electrical supplier.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il doit être

branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code national de l’électricité

et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la

responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code

national de l’électricité et aux codes et règles locaux applicables. La ﬁche de mise à la terre ne doit pas, en

aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le

cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été

vériﬁée et testée par un électricien qualiﬁé ou un fournisseur de matériel électrique.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide ................................1-16

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR PORTATIF

Guide d’utilisation et d’entretien............................17-32

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

CONTENTS

CAUTION:

Read and follow all safety rules and operating

instructions before ﬁrst use of this product.

AVERTISSEMENT :

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

TABLE DES MATIÈRES

WARNING

Improper connection of the grounding plug can

result in risk of ﬁre, electric shock and/or injury to

persons associated with the appliance. Check with

a qualiﬁed service representative if in doubt that

the appliance is properly grounded.

Model • Modèle

DPA120CB1WDB / DPA120UB1WDB / DPA140CB1WDB / DPA140UB1WDB

AVERTISSEMENT

Une ﬁche de mise à la terre mal branchée peut

entraîner un risque d’incendie, de choc électrique

ou de blessures aux personnes qui utilisent

l’appareil. Si vous n’êtes pas certain que l’appareil

est correctement mis à la terre, consultez un

préposé du service qualiﬁé.

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

find in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best

of all, you will experience these values each and every time you use your Danby appliance. That is important, because

your new appliance will be a part of your family for a long time.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Serial Number:

Date of Purchase:

NEED HELP?

Before you call for service, here are a few things you can do to help

us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before call-

ing. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone

call away.

1-800-26-

(1-800-263-2629)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

SAFETY

PRECAUTIONS ALWAYS DO THIS

Your air conditioner should be used in such a way that it is protected from

moisture. e.g. condensation, splashed water, etc. Do not place or store

your air conditioner where it can fall or be pulled into water or any other

liquid. Unplug unit immediately if this occurs.

Always transport your air conditioner in a vertical position and place on a

stable, level surface during use. If the unit is transported laying on its side it

should be stood up and left unplugged for 4 hours.

Turn off the unit when not in use.

Always contact a qualiﬁed person to perform repairs. If the power cord is

damaged it must be repaired by a qualiﬁed technician.

Keep the unit away from walls, furniture and curtains with a clearance of at

least 30 cm all around.

If the air conditioner is knocked over during use, turn off the unit and

unplug it immediately.

Always use the switch on the control panel to turn the unit on or off.

Portable air conditioners exhaust large amounts of room air.Always ensure

an adequate supply of make-up air to operate efﬁciently.

NEVER DO THIS

Do not operate your air conditioner in a wet room such as a bathroom or

laundry room.

Do not touch the unit with wet or damp hands.

Do not press the buttons on the control panel with anything other than your

ﬁngers.

Do not remove any ﬁxed components. Never use this appliance if it is not

working properly, or if it has been dropped or damaged.

Never use the plug to start and stop the unit.

Do not cover or obstruct the inlet or outlet grilles.

Do not use hazardous chemicals to clean or come into contact with the unit.

Do not use the unit in the presence of inﬂammable substances or vapour

such as alcohol, insecticides, gasoline, etc.

Do not allow children to operate the unit unsupervised.

Do not use this product for functions other than those described in this

instruction manual.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

ENERGY SAVING

TIPS

OPERATING

CONDITIONS

TOOLS FOR

WINDOW KIT

INSTALLATION

• Use the unit in the recommended room size.

• Locate the unit where furniture cannot obstruct the air ﬂow.

• Keep blinds/curtains closed during the sunniest part of the day.

• Keep the ﬁlters clean.

• Keep doors and windows closed to keep cool air in and warm air out

(cooling mode)

MODE ROOM TEMPERTURE

COOL 17°C (62°F) ~ 35°C (95°F)

DRY 13°C (55°F) ~ 35°C (95°F)

The air conditioner must be operated within the temperature range

indicated below:

Note: Performance may be reduced outside of these operating tempera-

tures.

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide

Identifying Parts

WARNING

• Do not store or use gasoline or other ﬂammable vapours and liquids in the vicinity of this or any other

appliance.

• Avoid ﬁre hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any

prong from the power cord.

ELECTRICAL INFORMATION

WARNING

• Be sure the electrical supply is adequate for the model you have chosen. This information can be found

on the serial plate, which is located on the side of the cabinet and behind the grille.

• Be sure the air conditioner is properly grounded. To minimize shock and ﬁre hazards, proper grounding

is important. The power cord is equipped with a three-prong grounding plug for protection against

shock hazards.

• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you

intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a

qualiﬁed electrician install the proper receptacle.

• Ensure the receptacle remains accessible after the unit is installed.

Identifying Parts

ACCESSORIES

PARTS PART NAME QUANTITY

• Exhaust hose and adaptor

(round mouth)

• Window slider kit and

screws

1 set

Foam seal 6/pc

Remote controller and battery

(for remote control models only) 1 set

Drain hose 1 pc

Note: Optional parts (*), some models do not include.

• Ensure that all the accessories are included in the package and refer to the installation instructions for their

usage.

Note: All the illustrations in this manual are for explanatory purposes only. Your air conditioner may be slightly

different.

UNIT STRUCTURE

FRONT

Control Panel

Horizontal louver blade

(adjusts automatically)

Caster

Carrying handle

(both sides)

Fig.1

EDOM FDE

IWS

REMI

NOCE

FORE

RESE TLOC K

RUT

Identifying Parts

Features

ELECTRONIC CONTROL

INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote control and all its functions. Select the

functions you desire based on the associated symbol.

The unit can be controlled by the control panel alone or with the remote control.

Note: This manual does not include Remote control Operation. See the Remote control Instructions packed with the unit

for this information.

567

Fig.3

REAR

Upper air filter (Behind the

Upper air intake

Air outlet

Power cord outlet

Power cord buckle (used only when storing

the unit)

Bottom tray drain outlet

Power plug socket (use only when storing

the unit)

Lower air filter (behind the grill)

Lower air intake

Drain outlet

Fig.2

910 11

grill)(behind the

Features

ELECTRONIC CONTROL

INSTRUCTIONS

POWER button

Turns power on/off.

SLEEP button

Used to initiate the SLEEP operation.

FAN button

Controls the fan speed. Press to toggle between three fan

speeds: LOW (press 1 time), MEDIUM (press 2 times) and

HIGH (press 3 times). The fan speed indicator light indicates

the corresponding fan setting. Press the button a fourth time to

initiate AUTO-FAN mode. In this mode, all three indicator lights

will light up.

UP and DOWN buttons

Used to adjust (increase / decrease) temperature settings

(1°C/1°F increments) in a range of 17°C(62°F) to 30°C(86°F)

or the TIMER setting in a range of 0~24hrs. The control is

capable of displaying temperature in degrees Fahrenheit or

degrees Celsius. To convert from one to the other, press and

hold the Up and Down buttons at the same time for 3 seconds.

MODE select button

Selects the appropriate operating mode. Each time you press

the button, a mode is selected in a sequence that goes from

AUTO, COOL, DRY, and FAN. The mode indicator light

illuminates depending on the mode settings.

TIMER button

Used to initiate the AUTO ON start time andAUTO OFF stop time program,

in conjunction with the up & down buttons.

SWING button

(select models only) Used to initiate the Auto swing feature. When

operating press the SWING button to stop the louver at the desired angle.

LED DISPLAY

Shows the set temperature in °C or °F and the Auto-timer settings.

While on DRY and FAN modes, it shows the room temperature.

Error codes:

E1 - Room temperature sensor error -Unplug the unit and plug

it back in. If error repeats, call for service.

E2 - Evaporator temperature sensor error- Unplug the unit and

plug it back in. If error repeats, call for service.

E3 - Condenser temperature error - Unplug the unit and plug it

back in. If error repeats call for service.

E4 - Display panel communication error - Unplug the unit and

plug it back in. If error repeats call for service.

P1 - Bottom tray is full - Connect the drain hose and drain the

collected water away. If error repeats, call for service.

This manual suits for next models

Table of contents

Languages:

Other Danby Air Conditioner manuals

Danby

Danby Diplomat DAC7037M User manual

Danby

Danby DAC5020 User manual

Danby

Danby Designer DPA100A1GD User manual

Danby

Danby DAC10000 Assembly instructions

Danby

Danby DPAC 7099 Assembly instructions

Danby

Danby DAC6020 User manual

Danby

Danby DPAC120010 Assembly instructions

Danby

Danby DPAC5009 Assembly instructions

Danby

Danby DAC060EB4WDB User manual

Danby

Danby DAC080EE2WDB User manual

Danby

Danby DAC5020 User manual

Danby

Danby DAC060BEUWDB Assembly instructions

Danby

Danby DAC080B5WDB User manual

Danby

Danby DAS120GBHWDB User manual

Danby

Danby DAC150EB1GDB Assembly instructions

Danby

Danby DPA140HEAUBDB Assembly instructions

Danby

Danby DAC10059 User manual

Danby

Danby DAC080B8IWDB-6 User manual

Danby

Danby DAS120GAHWDB User manual

Danby

Danby DAC060BHUWDB User manual

Danby

Danby DPA140E1BDB-6 User manual

Danby

Danby DPA100D1MDD User manual

Danby

Danby Silhouette DAC7024DE User manual

Danby

Danby DAC050BACWDB Assembly instructions

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual