Danby DPA140HEAUBDB Assembly instructions

2016.11.18

DPA140HEAUBDB

DPA140HEAUWDB

PORTABLE AIR CONDITIONER

CLIMATISEUR PORTATIF

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET D'ENTRETIEN

GUÍA DE UTILIZACIÓN Y CUIDADO PARA EL PROPIETARIO

MODEL • MODÈLE • MODELO

DANBY PRODUCTS LIMITED, ONTARIO, CANADAN1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA45840

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must

be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and

applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to exchange the existing receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. The third ground prong should not,

under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been checked and test-

ed by a qualiﬁed electrician or electrical supplier.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il doit être

branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code national de l’électricité

et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la

responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code

national de l’électricité et aux codes et règles locaux applicables. La ﬁche de mise à la terre ne doit pas, en

aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le

cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été

vériﬁée et testée par un électricien qualiﬁé ou un fournisseur de matériel électrique.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide ................................1-19

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR PORTATIF

Guide d’utilisation et d’entretien............................20-38

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

CONTENTS / TABLE DES MATIÈRES

CAUTION:

Read and follow all safety rules and operating

instructions before ﬁrst use of this product.

AVERTISSEMENT :

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

WARNING

Improper connection of the grounding plug can

result in risk of ﬁre, electric shock and/or injury to

persons associated with the appliance. Check with

a qualiﬁed service representative if in doubt that

the appliance is properly grounded.

Model • Modèle

DPA140HEAUBDB / DPA140HEAUWDB

AVERTISSEMENT

Une ﬁche de mise à la terre mal branchée peut

entraîner un risque d’incendie, de choc électrique

ou de blessures aux personnes qui utilisent

l’appareil. Si vous n’êtes pas certain que l’appareil

est correctement mis à la terre, consultez un

préposé du service qualiﬁé.

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

find in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best

of all, you will experience these values each and every time you use your Danby appliance. That is important, because

your new appliance will be a part of your family for a long time.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Model Number:

Serial Number:

Date of Purchase:

NEED HELP?

Before you call for service, here are a few things you can do to help

us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before call-

ing. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone

call away.

1-800-26-

(1-800-263-2629)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

SAFETY PRECAUTIONS

ALWAYS DO THIS

Your air conditioner should be used in such a way that it is protected from moisture, e.g. condensation,

splashed water, etc. Do not place or store your air conditioner where it can fall or be pulled into water or

any other liquid. Unplug unit immediately if this occurs.

Always transport your air conditioner in a vertical position and place on a stable, level surface during use.

If the unit is transported laying on its side it should be stood up and left unplugged for 6 hours.

Turn off the unit when not in use.

Always contact a qualiﬁed person to perform repairs. If the power cord is damaged it must be repaired by

a qualiﬁed technician.

Keep the unit away from walls, furniture and curtains with a clearance of at least 30 cm all around.

If the air conditioner is knocked over during use, turn off the unit and unplug it immediately.

Always use the switch on the control panel to turn the unit on or off.

NEVER DO THIS

Do not operate your air conditioner in a wet room such as a bathroom or laundry room.

Do not touch the unit with wet or damp hands.

Do not press the buttons on the control panel with anything other than your ﬁngers.

Do not remove any ﬁxed components. Never use this appliance if it is not working properly, or if it has

been dropped or damaged.

Never use the plug to start and stop the unit.

Do not cover or obstruct the inlet or outlet grilles.

Do not use hazardous chemicals to clean or come into contact with the unit.

Do not use the unit in the presence of inﬂammable substances or vapour such as alcohol, insecticides,

gasoline, etc.

Do not allow children to operate the unit unsupervised.

Do not use this product for functions other than those described in this instruction manual.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

ENERGY SAVING TIPS

OPERATING CONDITIONS

TOOLS FOR WINDOW KIT

INSTALLATION

• Use the unit in the recommended room size.

• Locate the unit where furniture cannot obstruct the air ﬂow.

• Keep blinds/curtains closed during the sunniest part of the day.

• Keep the ﬁlters clean.

• Keep doors and windows closed to keep cool air in and warm air out

(cooling mode)

MODE ROOM TEMPERTURE

COOL 18°C (64°F) ~ 35°C (95°F)

DRY 18°C (64°F) ~ 35°C (95°F)

HEAT 13°C (55°F) ~ 27°C (81°F)

The air conditioner must be operated within the temperature range

indicated below:

Note: Performance may be reduced outside of these operating temperatures.

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide

Identifying Parts

WARNING

• Do not store or use gasoline or other ﬂammable vapours and liquids in the vicinity of this or any other

appliance.

• Avoid ﬁre hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any

prong from the power cord.

ELECTRICAL INFORMATION

WARNING

• Be sure the electrical supply is adequate for the model you have chosen. This information can be found

on the serial plate, which is located on the side of the cabinet and behind the grille.

• Be sure the air conditioner is properly grounded. To minimize shock and ﬁre hazards, proper grounding

is important. The power cord is equipped with a three-prong grounding plug for protection against

shock hazards.

• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you

intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a

qualiﬁed electrician install the proper receptacle.

• Ensure the receptacle remains accessible after the unit is installed.

Identifying Parts

ACCESSORIES

PARTS PART NAME QUANTITY

• Exhaust hose and adaptor

• Window kit

• Screws

• Foam Seal Type 1

• Foam Seal Type 2

1 set

• Castor lock 1 set

• Remote control

• Battery 1 set

• Drainage Hose

• Drain Pan 1 set

• Ensure that all the accessories are included in the package and refer to the installation instructions for their usage.

Note: All the illustrations in this manual are for explanatory purposes only. Your air conditioner may be slightly different.

UNIT STRUCTURE

1. Air outlet grill

2. Handle (both sides)

3. LED Display

4. Castor

5. Air intake grill

6. Control Panel

7. Air intake grill

8. Air outlet

9. Drainage outlet

10. Power cord

Features

ELECTRONIC CONTROL INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote control and all its functions. Select the

functions you desire based on the associated symbol.

The unit can be controlled by the control panel alone or with the remote control.

POWER button

Turns power on/off.

FAN button

Controls the fan speed. Press to toggle between three fan speeds,

Maximum, Medium and Low

UP and DOWN buttons

Used to adjust (increase / decrease) temperature settings (1°C/1°F increments)

or the TIMER setting in a range of 1~24hrs.

The control is capable of displaying temperature in degrees Fahrenheit or

degrees Celsius. *Converting from °C to °F can be done using the remote control

by pressing the °C/°F button.

MODE select button

Selects the appropriate operating mode. Each time you press

the button, a mode is selected in a sequence that goes from

COOL, DRY, HEAT and FAN. The mode indicator light illuminates

depending on the mode settings.

LED DISPLAY

Shows the set temperature in °C or °F (to toggle between °C and °F

press the °C/°F button on the remote control).

Error codes:

Lt - Low Temperature. The unit will defrost. The appliance will

start again once defrosting is complete.

PF - Probe failure, call for service.

Ft- Tank is full - Connect the drain hose and drain the

collected water away. If error repeats, call for service.

REMOTE CONTROL SPECIFICATIONS

Model Danby.00-UYKQ-46e (White) / Danby.01-UYKQ-46e(B) (Black)

Rated Voltage 3V

Signal Receiving Range 7m

Environment -5°C to 60°C (-41°F to 140°F)

Operating Instructions

1. Operating Mode: COOL, DRY, HEAT and FAN.

2. Timer Setting Function in 24 hours.

3. Indoor Setting Temperature Range COOL: 18°C~32°C (64°F~90°F).

4. Indoor Setting Temperature Range HEAT: 13°C~27°C (55°F~81°F)

CAUTION

• The air conditioner will not respond if curtains, doors or other materials block the signal from the

remote control to the unit.

• Prevent any liquid from contact with the remote control. Do not expose the remote control to direct

sunlight or heat.

• If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner

may not function properly. Use curtains to prevent the sunlight from falling on the receiver.

• If other electrical appliances react to the remote control, either move these appliances to another

location or consult your local dealer.

• Do not mix old and new batteries or batteries of different types (if applicable).

• Do not leave the batteries in the remote control if it is not going to be used for more than 2

months.

• Dispose of the old batteries in special containers such as those found in sales outlets that sell

batteries.

REMOTE CONTROL INSTRUCTIONS

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de-

vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

1. Reorient or relocate the receiving antenna

2. Increase the separation between the equipment and receiver

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

4. Consult the dealer or an experienced radio/TV technician for help

Changes or modiﬁcations not approved by the party responsible for FCC compliance could void the

user’s authority to operate the equipment.

This appliance complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

This device complies with Canadian CAN ICES-3 (B) / NMB-3 (B)

Operating Instructions

REMOTE CONTROL INSTRUCTIONS

Operating Instructions

1. TEMP DOWN Button: Push this button to decrease

the indoor temperature setting by 1°C (1°F) increments.

2. TEMP UP Button: Push this button to increase the

indoor temperature setting by 1°C (1°F) increments.

3. M (Mode) Button: Each time the button is pressed, the

operation mode changes in the following sequence:

COOL DRY FAN HEAT

4. Button: Used to stop or start louver movement and

move the airﬂow direction up/down as desired.

5. Button: Unit operation starts when this button is

pressed and stops when the button is pressed again.

6. Button: Used to select the fan speed in 3 steps:

Maximum

Medium

Low

7. Button: Activates the Auto-on or Auto-off feature. See

page 10 for details.

8. Button: Select this function if you want the unit to

maintain a comfortable setting and save energy while you

sleep. This function is available on COOL and HEAT mode.

9. Button: Press this button to change from °C to °F.

• With the unit in stand-by, press the “M” button for 20 sec-

onds to change from °C to °F.

• Use the remote control within a distance of 7 m (23 ft.) from the appliance, pointing it towards the

receiver. Reception is conﬁrmed by a beep.

TIMER Display: This display area

shows the TIMER settings.

MODE Display: Displays the

current selected mode, including

COOL or HEAT.

Temp./Timer Display: The temperature setting in

Celcius or Farhenheit, or the timer setting from 0 to 24

hours.

Temperature Symbol: Indicates if

temperature is in °C or °F

FAN SPEED Display: Displays

the selected fan speed: Maximum,

Medium and Low.

DRY Mode: Dry mode will

display as dh.

This manual suits for next models

Table of contents

Languages:

Other Danby Air Conditioner manuals

Danby

Danby DAC060ECB4GDB Assembly instructions

Danby

Danby DAC100ECB4GDB Assembly instructions

Danby

Danby DPA072B8WDB-6 User manual

Danby

Danby DVAC10038E User manual

Danby

Danby DPA085CB1GDB Assembly instructions

Danby

Danby DAC080EB7WDB-RF User manual

Danby

Danby DPA120B3WDB Assembly instructions

Danby

Danby DPA100B9IWDB-6 User manual

Danby

Danby DPAC9008 User manual

Danby

Danby DPA120CB5BP Assembly instructions

Danby

Danby DAC060BHUWDB User manual

Danby

Danby DAS090BAHWDB User manual

Danby

Danby Premiere DPAC13012H Assembly instructions

Danby

Danby Designer DPA100A1GD Assembly instructions

Danby

Danby DPAC8399 User manual

Danby

Danby DAC18002 User manual

Danby

Danby DPA080C2SDB Assembly instructions

Danby

Danby DPAC8098 User manual

Danby

Danby Designer DPAC11012 Assembly instructions

Danby

Danby Simplicity SAC5000EE User manual

Danby

Danby DAC120EB3WDB User manual

Danby

Danby Premiere DPAC12012P Assembly instructions

Danby

Danby DPA058B6WDB User manual

Danby

Danby DAC080EB6WDB User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual