Daewoo DWA-182R User manual

Please observe the following instructions.

1. Operate the Power button to run or stop the unit.

- Do not operate Main Power Switch or Auxiliary Power Switch to do it.

2. Do not stick anything into the air outlet or inlet.

- It is a danger and it can cause trouble.

3. You must frequently open doors or windows for in taking fresh air from outdoors.

4. Avoid exposing your body directly to a continuous cool air - flow for long periods.

- It is not good for your health.

5. Do not pour water on the unit to clean it.

- It is dangerous and can cause trouble.

Never use solvents or harsh chemicals when cleaning the unit.

When the air inlet grill and cabinet are dirty, wipe with luke - warm water (below 40˚C)

6. Avoid placing any obstacles near the inlet or outlet.

- If the inlet or outlet is blocked with any obstacle, it may cause trouble with the unit.

7. Do not frequently run or stop the unit.

- If you run or stop the unit more then 4-5 times an hour, it can cause trouble with the unit.

8. When running the unit again after once having stopped it or in the case of power failure during running,

please wait for over 3 minutes.

- If you turn on the unit in 3 minutes, it can cause trouble with the unit.

9. If the air conditioner is operated without an air filter, dust is not removed from the air, and resultant

accumulation in the unit may lead to a failure.

- Do not forget to install the air filter.

10. The air filter cleaned at least once every two weeks.

11. When the unit is cleaned, set the Selector Switch at off position.

- And then unplug the power plug.

12. Never use store gasoline or other flammable vaper or liquid near the air conditioner.

- It is very dangerous.

13. Do not force the unit too much.

- It can cause trouble and damage.

14. Set a comfortable temperature.

- Very low temperature setting considerably increase power consumption.

15. Be careful to keep room temperature comfortable.

- Avoid continuous direct air flow on to the occupant, especially in case of those sleeping or a patient.

16. Do not pull out the power cord.

- Damage to the cord may result in serious electrical shocks.

17. The appliance is not intended for use by young children or infirm persons without supervision.

18. Young children should be supervised to ensure that they do not play with the appliance.

PRECAUTIONS FOR PROPER USE OF AIR CONDITIONER

1. GENERAL SPECIFICATIONS ..................................................2

2. NAMES OF MAJOR COMPONENTS ...........................................3

3. OPERATION INSTRUCTIONS ..................................................4

• DISPLAY

• REMOTE CONTROL

• HOW TO INSERT BATTERIES

4. GENERAL INFORMATION ....................................................10

• AIR FLOW AROUND UNIT

• DRAIN HOLE AND WATER DRIPPING OUTSIDE

• DOOR VENT

5. CARE AND MAINTENANCE ..................................................11

• AIR FILTER

• CLEANING THE AIR CONDITIONER

6. ELECTRICAL REQUIREMENTS...............................................12

• ELECTRICAL GROUNDING INSTRUCTIONS.

• USE OF EXTENSION CORDS

7. INSTALLATION INSTRUCTION ...............................................13

8. BEFORE CALLING FOR SERVICE............................................17

TABLE OF CONTENTS

GENERAL SPECIFICATIONS

ITEM

POWER SOURCE

COOLING CAPACITY

POWER INPUT

ENERGY EFFICIENCY RATIO

RUNNING CURRENT

DIMENSIONS

REFRIGERANT (R-22)

WEIGHT (NET)

DWA-182R

AC 220V, 60Hz

18 000 BTU/h

2 040W

8,8 BTU/Wh

9,4A

26,0(W) x 16,0(H) x 27,8(D) inch

660(W) x 430(H) x 705(D) mm

970 g

51,5 Kg (113,5 lbs)

NAMES OF MAJOR COMPONENTS

NO PART NAME

1 AIR FILTER

2 GRILLE FRONT

3 CABINET

4 BLADE VERTICAL

NO PART NAME

5 PANEL CONTROL

6 REMOTE CONTROLLER

7 BLADE HORIZONTAL

8 AIR VENT

• DWA-182R

OPERATION INSTRUCTIONS

Room Air-conditioner

FAN

TURBO

COOLING

ROOMTEMP

TEMP

DESIREDTEMP

TIMER

SENSOR

MODE POWER

FAN

SPEED AUTO

SWING

TEMP./TIMER DISPLAY

•It displays the temperature and the timer.

MODE DISPLAY

•It displays the operating mode.

REMOCON SIGNAL RECEIVER

TEMPERATURE SET

•It is the button to set the desired

room temperature.

The temperature can be set

within a range from 16°C (60°F)

to 32°C (90°F) by 1°C (1°F)

POWER ON/OFF SWITCH

•To turn the unit ON, push this button.

To turn the unit OFF, push this

button again.

MODE SELECT

•Everytime you push this button, It is selected as

follow. (COOLING→TURBO→FAN→COOLING)

FAN SPEED

•Everytime you push this button, It is selected as

follow. (High→Mid→Low→High)

AUTO SWING

•Everytime you push this button, the auto swing mode is toggled.

•DISPLAY

OPERATION INSTRUCTIONS (CONTINUED)

✽ Do not use the REMOTE CONTROLLER before the lamp lights. If use, the “°F”temperature

display can change to “°C”temperature display (only “°F”temperature display model).

REMOCON SIGNAL TRANSMITTER

TIMER/CANCEL

•Everytime you push this button,

timer is set as follow.

(1Hr→2Hr→3Hr→4Hr→5Hr→6Hr

→8Hr→10Hr→12Hr→16Hr→20Hr

→24Hr→CANCEL).

After the unit is timed, if this

button is pushed, timer is

canceled.

SLEEP

•SLEEP mode is selected as

follow. (L1→L2→Cancel)

MODE

•Everytime you push this

button, it is selected as

follow.

(COOLING→TURBO→FAN

→COOLING)

AUTO SWING

•Everytime you push this

button, the auto swing

mode is toggled.

TEMPERATURE

•It is the button to set the room

in the desired room temp.

The temp. can be set within a

range from 16°C (60°F) to

32°C (90°F) by 1°C (1°F)

POWER ON/OFF

•To turn the unit ON, push this

button. To turn the unit OFF,

push this button, again.

FAN SPEED

•Everytime you push this

button, it is selected as follow.

(High→Mid→Low→High)

TIMER/

CANCEL

FAN SPEED

TEMP

SLEEP

MODE

AUTO

SWING

OPERATION INSTRUCTION(CONTINUED)

FUNCTION

POWER ON

Push POWER button

COOLING MODE

Push the ‘MODE’button until

‘COOLING’lamp lights.

Change desired room

temperature

Push the ‘TEMP▲▼’button.

Change ‘FAN SPEED’

Push the ‘FAN SPEED’

button.

OPERATION

1. The unit starts working.

(It is delayed 3 minutes after

main power source is supplied.)

2. Default mode is ‘COOLING’

mode.

3. Default desired room

temperature is ‘26°C’(79°F).

And fan speed is ‘HIGH’.

1. Operating modes are changed

as follows by pushing “MODE”

button.

(COOLING→TURBO→FAN→

COOLING)

2. The compressor and fan work.

3. In this mode you can change

fan speed and desired

temperature at any time.

4. SLEEP mode and ON/OFF

TIMER can be selected.

(By remocon button only)

1. The desired room temperature

is changed within a range from

16°C (60°F) to 32°C (90°F) by

1°C.

1. FAN SPEED is changed as

follows by pushing “FAN

SPEED”button.

(HIGH→MID→LOW→HIGH)

DISPLAY

1. Current room temperature is

displayed.

2. ‘COOLING’lamp lights.

3. ‘ROOM TEMP’lamp lights.

1. Current room temperature is

displayed.

2. ‘COOLING’lamp lights.

3. ‘ROOM TEMP’lamp lights.

1. It display desired room

temperature when ‘TEMP’

button is pushed.

2. ‘DESIRED TEMP’lamp lights.

3. After a few seconds, display is

changed to current room

temperature and ‘ROOM TEMP’

lamp lights.

1. It displays as follows.

2. After a few seconds, display is

changed to current room

temperature.

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

HIGH MID LOW

POWER

MODE

TEMP

MODE

TEMP

FAN

SPEED

FAN SPEED

OPERATION INSTRUCTIONS (CONTINUED)

FUNCTION

FAN MODE

Push the ‘MODE’button until

‘FAN’lamp lights.

ON/OFF AUTO SWING

Push the ‘AUTO SWING’

button.

TURBO MODE

Push the ‘MODE’button until

‘TURBO’lamp lights.

OFF TIMER

Push the ‘TIMER/CANCEL’

button when unit is working.

(REMOCON ONLY)

OPERATION

1. The Fan works only.

2. In this mode, the unit circulate

room air.

3. Fan speed can be changed.

1. Auto swing function is toggled.

2. Air out-flow direction is changed

automatically. (left/right

direction)

1. Fan speed is set to ‘HIGH’and

desired temperature to 18°C

(64°F).

1. Timer is set to as follows by

pushing “TIMER/CANCEL”

button.

(1hr→2hr→3hr→4hr→5hr→6hr→

8hr→10hr→12hr→16hr→20hr→

24hr→cancel)

2. Unit is off after timer is over.

3. If you want to cancel timer, push

this button again at any time.

DISPLAY

1. Current room temperature is

displayed.

2. ‘FAN’lamp lights.

3. ‘ROOM TEMP’lamp lights.

There is no change in display.

1. Current room temperature is

displayed.

2. ‘TURBO’lamp lights.

3. ‘ROOM TEMP’lamp lights.

1. ‘TIMER’lamp lights.

2. Set time is displayed.

3. After a few seconds, display is

changed to current room

temprature. and ‘ROOM TEMP’

lamp lights.

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

AUTO

SWING

AUTO

SWING

MODE

TIMER/

CANCEL

MODE

OPERATION INSTRUCTIONS (CONTINUED)

FUNCTION

ON TIMER

Push the ‘TIMER/CANCEL’

button when unit is off.

(REMOCON ONLY)

SLEEP MODE

Push the ‘SLEEP’button in

‘COOLING’mode.

(REMOCON ONLY)

OPERATION

1. Timer is changed to as follows

by pushing “TIMER/CANCEL”

button.

(1hr→2hr→3hr→4hr→5hr→6hr→

8hr→10hr→12hr→16hr→20hr→

24hr→cancel)

2. The unit starts working after set

time is over in cooling mode with

last temperature set.

3. If you want to cancel timer, push

this button again at any time.

1. SLEEP MODE is changed as

follows by pushing “SLEEP”

button. (L1→L2→cancel)

* L1 Mode

–The unit is off after 4 hours.

–The desired Temp is in

creased 3°C (5.4°F) for 4

hours.

–Auto swing is selected.

–Fan speed is set to ‘LOW’.

* L2 MODE

–The unit works as follow.

–Auto swing is selected.

–Fan speed is set to ‘LOW’.

2. Set proper desired room

temperature, fan speed and

auto-swing mode.

3. This mode can be selected in

‘COOLING’mode only.

DISPLAY

1. ‘TIMER’lamp lights.

2. Setting time is displayed.

3. After a few seconds, display is

changed to current room

temperature. and ‘ROOM

TEMP’lamp lights.

1. ‘L1’or ‘L2’is displayed.

2. ‘ROOM TEMP’and ‘DESIRED

TEMP’lamp is off.

FAN

TURBO

COOLING

ROOM TEMP

DESIRED TEMP

TIMER

TIMER/

CANCEL

SLEEP

OFF 2hr 2hr 2hr 2hr 2hr

+1°C+1°C

•ROOM TEMPERATURE DISPLAY.

Over 45°C or 100°F

5°C~45°C or 41°F~99°F

Below 5°C (41°F)

DISPLAY TEMPERATURE

OPERATION INSTRUCTIONS (CONTINUED)

•HOW TO INSERT BATTERIES

Remove the COVER from

the back of the remote

controller.

•Slide the Cover according

to the arrow direction

Insert two battaries.

•Be sure that the (+) and (–)

directions are correct

•Be sure that both batteries

are new

Re-attach the cover.

•Slide it back into position

•Do not use rechargeable batteries such batteries differ from standard dry cells in shape,

dimensions, and performance.

•Remove the batteries from the remote controller if the air conditioner is not going to be used for

an extended length of time.

1 2 3

–+

•AIR FLOW AROUND UNIT

Check in door grill and outdoor louvers for air flow obstructions. Do not block air flow to and from unit. The

outdoor coil should be checked and periodically cleaned for debris that may collect and block unit air flow.

If air flow is obstructed or deflected back into unit, the compressor may cycle on and off rapidly, causing

early compressor failure.

•DRAIN HOLE AND WATER DRIPPING OUTSIDE

Locate drain hole at the rear or on the bottom of unit. Water in base pan is picked up by the fan blade and

thrown onto the warm outdoor coil where it evaporates. The air conditioner must be installed level or tilted

slightly to the outside for proper water disposal. On exceptionally hot and humid days the air conditioner

may permit excess water to pass thru rear drain hole or overflow. This should be considered normal.

•DOOR VENT

The door vent for the room air ventilation is lever type.

If the door vent lever moves to the left, then close the

vent and moves to the rght, then open the vent.

GENERAL INFORMATION

Close Vent → Open

→

Door Vent

Other manuals for DWA-182R

Table of contents

Other Daewoo Air Conditioner manuals

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual