Daewoo COL1317 User manual

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should

always be followed. These instructions should be saved for future

reference:

• Read and familiarise yourself with all operating instructions before

using this Air Conditioner.

• Before plugging your unit into the mains, visually check that the unit

is intact and has not su󰀨ered any transit damage.

• Check that the voltage indicated on the data plate corresponds with

that of the local network before connecting the appliance to the

mains power supply.

• If you are in any doubt about the suitability of your electricity supply

have it checked and, if necessary, modied by a qualied person.

• Disconnect the power plug from the socket before dismantling,

assembling or cleaning.

• Avoid touching any moving parts within the appliance.

• Never insert ngers, pencils or any other objects through the guard.

• This appliance can be used by children from 8 years and above and

persons with reduced physical, sensory or mental capabilities or

lack of experience or knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understands the hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall not be made by

children without supervision.

• Do not leave children unsupervised with this appliance.

• Do not clean the unit by spraying it or immersing it in water.

• Never connect the appliance to an electrical outlet using an

extension lead. If an outlet is not available, one should be installed

by a qualied electrician.

• Never operate this appliance if the cord or plug are damaged.

Ensure the power cord is not stretched or exposed to sharp objects

or edges.

• A damaged supply cord should be replaced by the manufacturer or a

qualied electrician in order to avoid a hazard.

• Any service other than regular cleaning or lter replacement should

be performed by an authorised service representative.

• Do not use this appliance for any other purpose than it’s intended

use.

• The air conditioner must always be stored and transported upright,

otherwise irreparable damage may be caused to the compressor; if

in doubt, wait at least 24 hours before restarting the unit.

• Avoid restarting the air conditioner unless 3 minutes have passed

since being turned o󰀨. This prevents damage to the compressor.

• Never use the mains plug or external timer as a means of switching

the air conditioner on or o󰀨. Use the ON/OFF button located on the

control panel.

• Always place the unit on a dry and stable surface.

• The appliance should not be placed in a laundry or wet room.

• The appliance must be placed in a room without sources of

ignition (for example: open ames, an operating gas appliance or an

operating electric heater)

• The appliance must be installed and used in a room with a oor area

larger than 4m2

• This appliance contains R290 refrigerant gas. For quantity see rating

label on the rear of the unit.

• R290 refrigerant gas complies with EU environmental directives.

• Refrigerant gas may be odourless, if the appliance is used or stored

in an unventilated room, the room must be such as to prevent

stagnation of possible leaks of refrigerant gas as there could be a

danger of re or explosion hazard should the refrigerant come into

contact with electric heaters, stoves or other sources of ignition.

• The refrigerant system should not be perforated.

• The appliance must be stored in such a way as to prevent

mechanical failure.

• Individuals who operate or work on the refrigerant circuit must have

the appropriate certication issued by an accredited organisation that

ensures competence in handling refrigerants according to a specic

evaluation recognized by associations in the industry.

• Repairs must be performed based on the recommendation from the

manufacturing company. Maintenance and repairs that require the

assistance of other qualied persons must be performed under the

supervision of an individual specied in the use of ammable refriger-

ants.

Description of parts

1. 6.

4. FrontSide Rear

1. Rear Panel

2. Air Inlet

3. Exhaust

4. Castors

5. Control Panel

6. Air Outlet

7. Power Cord

8. Air Inlet

9. Internal Tank Drain

Control panel

1. Fan Speed and Timer Indicators.

2. LED Display.

3. Mode Indicators.

4. Power ON/OFF Switch.

5. Temperature/Time + Button

6. Temperature/Time - Button.

7. Remote Signal Receiver.

8. Mode Selection Button.

9. Fan Speed Selection Button.

10. Timer Select Button

4. 9.6.5.

1. 2.

8.7. 10.

Vent kit

1. 3.2.

1. Flexible Hose

2. Hose Connector

3. Hose Exit Ring

Fitting the Flexible Hose – the hose must be tted before use

1. First t the hose connector (2) to one end of the hose as follows:

a. Extend one

end of the

exible hose

(1) by about

10cm

b. Screw the hose

connector (2)

onto the end

of the hose in

a clockwise

direction.

c. Extend the

other end of

the exible

hose (1) by

about 10cm

d. Screw the hose

exit ring (3)

onto the other

end of the hose

in a clockwise

direction.

2. Next attached the hose exit ring (3) to the other end of the hose as

follows:

3. Next attached the hose exit ring (3) to the other end of the hose as

follows:

e. Hook the at

part of the hose

connector (2)

into the slot on

the rear of the

unit as shown

left.

f. Bring the hose

connector (2) towards

the back of the unit

until the notches in the

connector line up with

the tongues on the

rear of the unit. Finally

slide the connector

down in the direction

of the arrow shown

left.

4. Place the exit end of the hose through a suitable outlet such as an

open window, door, etc.

NB the unit must be positioned a minimum of 1 metre from any wall or

obstruction on all sides.

Before use, check the exible vent hose is properly tted.

Ensure the unit is on a level dry surface and the mains supply meets the

requirements of the unit.

Do not share sockets with other appliances via a mains adaptor or other

means.

Using the Air Conditioning Unit

Cooling Operation

1. Turn the unit on using the ON/OFF button.

2. Press the Mode Button until the Cool indicator illuminates.

3. Press the Temperature + or Temperature – Button to select a desired

room temperature (16˚C - 31˚C).

4. Press the Fan Speed Selection Button to choose the required air ow

speed.

NOTE: To create a circulatory e󰀨ect, the cooled air leaves the unit at

an angle and slightly to one side. This is to make space cooling more

e󰀩cient and is normal.

Dehumidifying Operation

1. Turn the unit on sing the ON/OFF Button.

2. Press the Mode Button until the Dehum indicator illuminates.

The unit will automatically set the temperature to 2˚C below the room

temperature and the fan speed to low.

Fan Only Operation

1. Press the Mode Button until the Fan indicator illuminates.

2. Press the Fan Speed Selection Button to choose the required air ow

speed.

Timer Operation

Time ON Setting.

1. When the unit is OFF, press the Timer button and select a desired

ON time using the Temperature/Time + and – Buttons.

2. The ON time is displayed on the LED Display as a number of hours

to the ON time (0 – 24Hrs).

Time OFF Setting

1. When the unit is ON, press the Timer button and select a desired

OFF time using the Temperature/Time + and – Buttons.

2. The OFF time is displayed on the LED Display as a number of hours

to the OFF time (0 – 24Hrs).

Remote Control

The controls on the control

panel are duplicated on the

remote control to allow full

function use of the remote

Batteries

• Remove the battery compartment cover on the back of the remote

control by pushing back the clip and removing.

• Insert 2 x AAA batteries (not supplied) into the battery compartment

observing the polarity markings on the inside.

• Replace the battery cover.

• Do not mix old and new batteries together.

• It is recommended that batteries are removed if the remote is not to

be used for a long time period.

Waste batteries should not be disposed of with household

waste. Please recycle where facilities exist. Check with your

Local Authority or retailer for recycling advice.

Internal Water Tank and Draining

During normal use, a majority of the moisture collected will be evaporat-

ed internally by the unit and expelled through the exhaust (3).

However, the internal water tank will eventually ll to its maximum ca-

pacity and the Water Full (WF) indicator will illuminate on the control

panel to show the tank is full.

To empty the water tank, take the unit outside, remove the bung from

the drain at the bottom rear left of the unit and allow the tank to empty.

Alternatively connect a hose to the drain and lead it outside to the drain

the tank.

NB ensure the drain bung is replaced before using the unit again.

The Water Tank Drain bung on

the bottom left of the rear panel

(arrowed).

Air Filter

The air lter is located behind the side air inlet grille and will need occa-

sional cleaning. To clean the lter remove the lter by pulling the tab, the

lter can be cleaned in lukewarm (40˚C) water with mild detergent. See

image left.

After washing allow the lter to dry naturally, laid at to avoid stretching.

Ensure that the lter has fully dried before retting it to the unit.

NB do not use the unit without the lter tted.

The Air Filter located on the top left

hand side of the unit (shown partially

removed). To remove, slide the lter out

in the direction of the arrow.

Safety

The unit is tted with an automatic high temperature shut o󰀨 device, if

the air inlet or exhaust are blocked the unit will shut down safely.

After clearing the blockage, allow 5 minutes before restarting the unit.

Cleaning and Maintenance

Clean the surface of the unit with a damp cloth and mild detergent.

Excess dust etc can be removed from grilles and exhaust using the noz-

zle attachment of a vacuum cleaner.

Problem Reason Solution

The unit does not

power up

No power supply

Water tank is full

Timer function is active

Room temperature is too low

Power on and turn on the unit

Drain the water tank

Cancel timer function

Reset temperature on unit

Unit not performing

well

Unit is in direct sunlight

Filter is dirty

Air inlet or outlet is blocked

Shade the unit with curtains/

blinds

Remove and clean the lter

Remove any blockage or

debris from the inlet/outlet

Compressor not

working

Overheat protection device

has operated

Check venting then allow

the unit to cool for 5 minutes

before restarting

Remote control not

working

Operating distance is too far.

Batteries are at

Move closer to the unit.

Replace batteries

Unit is noisy The unit is located on an

uneven surface

Position the unit on a at level

surface

E2 Code displayed Water tank full Drain the water tank

Troubleshooting

Technical Data

Model Number : COL1317

Cooling Capacity : 7000 BTU/h (2.65kW)

Refrigerant : R290 (160g)

Operating Pressure : Discharge 2.6MP

Suction 1.0MPa

Maximum Pressure : Discharge 3.2MPa

Suction 1.2MPa

Weight : 19kg

Rated Voltage : 220-240V

Rated Current : 3.4A

Rated Power Input : 785W

IP Rating : IP20

Sound Power Level : 65dB(A)

Table of contents

Other Daewoo Air Conditioner manuals

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual