D-Link DIR-300A User manual
Quick Installation Guide
DIR-300A
Wireless N150 Router
DIR-300A Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DIR-300A
•Power adapter DC 12V/0.5A
•Ethernet cable CAT 5)
•“Quick Installation Guide” brochure).
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents are available
on D-Link website see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2
DIR-300A Quick Installation Guide
Default Settings
IP add ess of wi eless oute 192.168.0.1
Use name (login) admin
Passwo d admin
Name of wi eless netwo k (SSID) DIR-300A
Netwo k key (PSK passwo d)
see WPS PIN on the
barcode label on the
bottom panel of the
device
!
Router DIR-300A with default settings cannot connect to the Internet.
To get started, please set your own password for access to the web-
based interface and change the WLAN name SSID); then, if needed,
configure other settings recommended by your ISP.
3
DIR-300A Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the router:
◦Apple Safari 8 and later
◦Google Chrome 48 and later
◦Microsoft Internet Explorer 10 and later
◦Microsoft Edge 20.10240 and later
◦Mozilla Firefox 44 and later
◦Opera 35 and later.
•A NIC Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11b, g, or n Wi-Fi adapter to create a wireless network.
4
DIR-300A Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Turn on the router by pressing the POWER button on its back panel.
5. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically as
DHCP client).
5
DIR-300A Quick Installation Guide
Obtaining P Address Automatically
in OS Windows XP
1. Click the Sta t button and proceed to the Cont ol Panel > Netwo k
and Inte net Connections > Netwo k Connections window.
2. In the Netwo k Connections window, right-click the relevant Local
A ea Connection icon and select the P ope ties line in the menu
displayed.
3. In the Local A ea Connection P ope ties window, on the Gene al
tab, select the Inte net P otocol (TCP/IP) line. Click the P ope ties
button.
6
DIR-300A Quick Installation Guide
4. Select the Obtain an IP add ess automatically and Obtain DNS
se ve add ess automatically radio buttons. Click the OK button.
5. Click the ОК button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
7
DIR-300A Quick Installation Guide
Obtaining P Address Automatically
in OS Windows 7
1. Click the Sta t button and proceed to the Cont ol Panel window.
2. Select the Netwo k and Sha ing Cente section. If the Control Panel
has the category view the Catego y value is selected from the View by
drop-down list in the top right corner of the window), choose the View
netwo k status and tasks line under the Netwo k and Inte net
section.)
3. In the menu located on the left part of the window, select the Change
adapte settings line.
4. In the opened window, right-click the relevant Local A ea Connection
icon and select the P ope ties line in the menu displayed.
5. In the Local A ea Connection P ope ties window, on the
Netwo king tab, select the Inte net P otocol Ve sion 4 (TCP/IPv4)
line. Click the P ope ties button.
8
DIR-300A Quick Installation Guide
6. Select the Obtain an IP add ess automatically and Obtain DNS
se ve add ess automatically radio buttons. Click the OK button.
7. Click the OK button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
9
DIR-300A Quick Installation Guide
PC with Wi-Fi Adapter
1. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
2. Turn on the router by pressing the POWER button on its back panel.
3. Turn on your PC and wait until your operating system is completely
loaded.
4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
10
Other manuals for DIR-300A
2
Table of contents
Other D-Link Network Router manuals
D-Link
D-Link DSL-245GR User manual
D-Link
D-Link DWR-922 User manual
D-Link
D-Link DES-1048 User manual
D-Link
D-Link DIR-601 User manual
D-Link
D-Link DSL-2750E User manual
D-Link
D-Link DSL-510 User manual
D-Link
D-Link DSG-1100-10/ME User manual
D-Link
D-Link DWC-1000 User manual
D-Link
D-Link DVX-7090 User manual
D-Link
D-Link DSL-2642B User manual
D-Link
D-Link DIR-456U User manual
D-Link
D-Link des-1016a User manual
D-Link
D-Link Ethernet Switches User manual
D-Link
D-Link DWR-910 User manual
D-Link
D-Link DSL-2745 User manual
D-Link
D-Link DSL-2540U User manual
D-Link
D-Link DIR-850L User manual
D-Link
D-Link DIR-518L User manual
D-Link
D-Link DHP-601AV User manual
D-Link
D-Link DSL-2540U User manual
