D-Link DIR-815/AC User manual

Quick Installation Guide

DIR-815/AC

Wireless AC1200 Dual Band Router with

3G/L E Support and USB Port

DIR-815/AC Quick Installation Guide

BEFORE YOU BEGI

Delivery Package

•Router DIR-815/AC

•Power adapter DC 12V/1A

•Ethernet cable (CAT 5

•“Quick Installation Guide” (brochure .

If any of the items are missing, please contact your reseller.

The “User Manual” and “Quick Installation Guide” documents are available

on D-Link website (see www.dlink.ru .

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

DIR-815/AC Quick Installation Guide

Default Settings

IP address of wireless router 192.168.0.1

Username (login) admin

Password admin

ame of wireless network (SSID)

2.4GHz DIR-815

5GHz DIR-815-5G

etwork key (PSK password)

see WPS PIN on the

barcode label on the

bottom panel of the

device

Router DIR-815/AC with default settings cannot connect to the

Internet. To get started, please set your own password for access to the

web-based interface and change the WLAN name (SSID ; then, if

needed, configure other settings recommended by your ISP.

DIR-815/AC Quick Installation Guide

System Requirements and Equipment

•A computer with any operating system that supports a web browser.

•A web browser to access the web-based interface of the router:

◦Apple Safari 8 and later

◦Google Chrome 48 and later

◦Microsoft Internet Explorer 10 and later

◦Microsoft Edge 20.10240 and later

◦Mozilla Firefox 44 and later

◦Opera 35 and later.

•A NIC (Ethernet or Wi-Fi adapter to connect to the router.

•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wireless network.

•A USB modem (when it is necessary to connect to the Internet via mobile

operators' networks 1.

Your USB modem should be equipped with an active SIM card of your

operator.

Some operators require subscribers to activate their USB modems prior

to using them. Please, refer to connection guidelines provided by your

operator when concluding the agreement or placed on its website.

For some models of LTE USB modems, it is required to disable the PIN

code check on the SIM card prior to connecting the USB modem to the

router.

1 Contact your operator to get information on the service coverage and fees.

DIR-815/AC Quick Installation Guide

CO ECTI G TO PC

PC with Ethernet Adapter

1. Make sure that your PC is powered off.

2. Connect an Ethernet cable between any of LAN ports located on the back

panel of the router and the Ethernet port of your PC.

3. To connect via USB modem: connect your USB modem to the USB port2

located on the back panel of the router.

!In some cases you will need to reboot the router after connection of the

USB modem.

4. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

5. Turn on the router by pressing the POWER button on its back panel.

6. Turn on your PC and wait until your operating system is completely

loaded.

Now you should configure your PC to obtain an IP address automatically (as

DHCP client .

2 It is recommended to use a USB extension cable to connect a USB modem to the

router.

DIR-815/AC Quick Installation Guide

Obtaining P Address Automatically

in OS Windows XP

1. Click the Start button and proceed to the Control Panel > etwork

and Internet Connections > etwork Connections window.

2. In the etwork Connections window, right-click the relevant Local

Area Connection icon and select the Properties line in the menu

displayed.

3. In the Local Area Connection Properties window, on the General

tab, select the Internet Protocol (TCP/IP) line. Click the Properties

button.

DIR-815/AC Quick Installation Guide

4. Select the Obtain an IP address automatically and Obtain D S

server address automatically radio buttons. Click the OK button.

5. Click the ОК button in the connection properties window.

Now your computer is configured to obtain an IP address automatically.

DIR-815/AC Quick Installation Guide

Obtaining P Address Automatically

in OS Windows 7

1. Click the Start button and proceed to the Control Panel window.

2. Select the etwork and Sharing Center section. (If the Control Panel

has the category view (the Category value is selected from the View by

drop-down list in the top right corner of the window , choose the View

network status and tasks line under the etwork and Internet

section.

3. In the menu located on the left part of the window, select the Change

adapter settings line.

4. In the opened window, right-click the relevant Local Area Connection

icon and select the Properties line in the menu displayed.

5. In the Local Area Connection Properties window, on the

etworking tab, select the Internet Protocol Version 4 (TCP/IPv4)

line. Click the Properties button.

DIR-815/AC Quick Installation Guide

6. Select the Obtain an IP address automatically and Obtain D S

server address automatically radio buttons. Click the OK button.

7. Click the OK button in the connection properties window.

Now your computer is configured to obtain an IP address automatically.

DIR-815/AC Quick Installation Guide

PC with Wi-Fi Adapter

1. To connect via USB modem: connect your USB modem to the USB port3

located on the back panel of the router.

!In some cases you will need to reboot the router after connection of the

USB modem.

2. Connect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

3. Turn on the router by pressing the POWER button on its back panel.

4. Turn on your PC and wait until your operating system is completely

loaded.

5. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in

wireless NICs are equipped with a button or switch that turns on/off the

wireless adapter (refer to your PC documents . If your PC is equipped

with a pluggable wireless NIC, install the software provided with your

Wi-Fi adapter.

Now you should configure your Wi-Fi adapter.

3 It is recommended to use a USB extension cable to connect a USB modem to the

router.

Other manuals for DIR-815/AC

Table of contents

Other D-Link Network Router manuals

D-Link

D-Link DSL-500 User manual

D-Link

D-Link DSR-250N User manual

D-Link

D-Link DKT-810 User manual

D-Link

D-Link Amplifi DIR-657 User manual

D-Link

D-Link DSL-504T User manual

D-Link

D-Link Xtreme N DIR-825 User manual

D-Link

D-Link DSL-G225 User manual

D-Link

D-Link DES-5016 User manual

D-Link

D-Link WBR-1310 - Wireless G Router User manual

D-Link

D-Link DIR-636L User manual

D-Link

D-Link DVX-7090 User manual

D-Link

D-Link DSL-2642B User manual

D-Link

D-Link DIR-827 User manual

D-Link

D-Link DIR-456 User manual

D-Link

D-Link DES-1050G User manual

D-Link

D-Link DGS-1224T - Web Smart Switch User manual

D-Link

D-Link DSL-2870B User manual

D-Link

D-Link DSL-2520U User manual

D-Link

D-Link AC1900 User manual

D-Link

D-Link DSL-504G User manual

D-Link

D-Link DIR-140L User manual

D-Link

D-Link DSL-3788 User manual

D-Link

D-Link DSL-224 User manual

D-Link

D-Link Express Ethernetwork DI-704P User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview