D-Link DIR-878 User manual
Quick Installation Guide
DIR-878
AC1900 MU-MIMO Wi-Fi Gigabit Router
DIR-878 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DIR-878
•Power adapter DC 12V/1.5A
•Ethernet cable CAT 5E)
•“Quick Installation Guide” brochure).
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents are available
on D-Link website see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2
DIR-878 Quick Installation Guide
Default Settings
IP address o wireless router 192.168.0.1
Username (login) admin
Password admin
Name o wireless network
(SSID)
2.4GHz DIR-878
5GHz DIR-878-5G
Network key (PSK password)
see WPS PIN on the
barcode label on the
bottom panel of the
device
!
Router DIR-878 with default settings cannot connect to the Internet. To
get started, please set your own password for access to the web-based
interface and change the WLAN name SSID); then, if needed,
configure other settings recommended by your ISP.
3
DIR-878 Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the router:
◦Apple Safari 8 and later
◦Google Chrome 48 and later
◦Microsoft Internet Explorer 10 and later
◦Microsoft Edge 20.10240 and later
◦Mozilla Firefox 44 and later
◦Opera 35 and later.
•A NIC Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11a, b, g, n or ac Wi-Fi adapter to create a wireless network.
4
DIR-878 Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. Turn on the router by pressing the POWER button on its back panel.
5. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically as
DHCP client).
5
DIR-878 Quick Installation Guide
Obtaining P Address Automatically
in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu
displayed.
3. In the Local Area Connection Properties window, on the General
tab, select the Internet Protocol (TCP/IP) line. Click the Properties
button.
6
DIR-878 Quick Installation Guide
4. Select the Obtain an IP address automatically and Obtain DNS
server address automatically radio buttons. Click the OK button.
5. Click the ОК button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
7
DIR-878 Quick Installation Guide
Obtaining P Address Automatically
in OS Windows 7
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. If the Control Panel
has the category view the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking tab, select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties button.
8
DIR-878 Quick Installation Guide
6. Select the Obtain an IP address automatically and Obtain DNS
server address automatically radio buttons. Click the OK button.
7. Click the OK button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
9
DIR-878 Quick Installation Guide
PC with Wi-Fi Adapter
1. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
2. Turn on the router by pressing the POWER button on its back panel.
3. Turn on your PC and wait until your operating system is completely
loaded.
4. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
10
Other manuals for DIR-878
6
Table of contents
Other D-Link Network Router manuals
D-Link
D-Link xStack DGS-3324SRi User manual
D-Link
D-Link DES-1210G User manual
D-Link
D-Link des-1016a User manual
D-Link
D-Link DIR-611 User manual
D-Link
D-Link AC1900 User manual
D-Link
D-Link AirPremier DWL-1800 User manual
D-Link
D-Link DMS-1100-10TS User manual
D-Link
D-Link DIR-300 - Wireless G Router User manual
D-Link
D-Link DWP-1010KT User manual
D-Link
D-Link DIR-1750 User manual
D-Link
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router User manual
D-Link
D-Link DIR-640L User manual
D-Link
D-Link DIR-842 User manual
D-Link
D-Link DSL-G2452GR User manual
D-Link
D-Link DIR-822 User manual
D-Link
D-Link xStack DES-3810 Manual
D-Link
D-Link DSL-G604T User manual
D-Link
D-Link DGS-3000-10TC Manual
D-Link
D-Link DIR-853 User manual
D-Link
D-Link DWR-953 User manual
