D-Link DWA-582 User manual
DWA-582
Quick Install Guide
Wireless AC1200
Dual Band PCI Express Adapter
If any of the above items are missing, please contact your reseller.
• An available PCIe slot
• Windows® 8.1, 8, or 7
• An 802.11ac or 802.11n wireless network
• 20MB of free hard drive space
• CD-ROM Drive
DWA-582 Wireless AC1200 Dual Band PCI Express Adapter
Two Antennas
Low Prole Bracket
CD with drivers and manual
Package Contents
System Requirements
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters.
• Disable any built-in wireless and/or Ethernet adapters.
• Verify the settings such as the wireless network name (SSID) and security
settings of the network(s) you want to connect to.
• Youcandownloadthelatestdriverfromhttp://support.dlink.com/DWA-582
(USA) or http://support.dlink.ca/DWA-582 (Canada).
Before You Begin
2
Remove Existing Installations
If you’ve installed a dierent manufacturer’s adapter or a dierent model D-Link
adapter, make sure the software is uninstalled before installing the new software.
Some utilities may cause a conict with the new software. If you plan to use
multiple adapters at dierent times, make sure the utilities are not set to load
when your computer boots up.
To remove old software, click Start > Control Panel > Uninstall Programs
1
WARNING: Do NOT install the adapter into your computer before installing
the drivers. You will be prompted to install your adapter during the setup.
Note: If the CD Autorun function does not automatically start on your computer, go to
Start > Run. In the run box type “D:\autorun.exe” (where D: represents the drive letter
of your CD-ROM drive) and click OK.
Installation - Windows
Insert the DWA-582 Driver CD into the CD-ROM drive. When the autorun
screen appears, click Install and follow the on-screen instructions.
2When the wizard instructs you to turn o your computer and install the PCIe
adapter into your computer, click Next and then Finish. Shut down your
computer and unplug the power.
3
Once your computer boots into Windows, the D-Link Installation Wizard
should continue with your installation.
After installation, use theWindows built-in wireless management utility to
connect the DWA-582 to your wireless network.
Note: For more information on how to connect to your wireless network using
your version of Windows, please refer to the User Manual on the included CD.
5
4
3Once your computer is turned o, unplug the power cord from the computer.
Open the case and insert the D-Link adapter into an available PCIe slot. Once
inserted, close the case and insert the power cable into the computer. Turn
on your computer.
Note: Before installing, write down the serial number and hardware revision (e.g.,
A1) in case you need to contact technical support.
4
1. If I’ve lost my CD what can I do ?
TheCDcontainssoftwaredriversandmanualwhichcanbeobtainedfromhttp://
support.dlink.com. Windows 8.1, 8, and 7 in most cases will automatically
install the correct drivers.
2. If I’ve forgotten my wireless encryption key (password)?
The wireless encryption key is congured at the wireless access point, router,
or DSL modem/router. If you are unable to obtain your encryption key, the
only solution would be to re-congure your access point/router to use a new
encryption key. Please contact your access point/router/DSL modem/router
manufacturer.
3. Why can’t I get a wireless connection?
• Check that your DWA-582 is plugged in properly to the PCIe slot or try to plug
the DWA-582 into another PCIe slot if available.
• The LED on the DWA-582 should be lit, otherwise there could be a physical
fault on the PCIe slot or the driver is not installed properly.
• Ensure that the wireless settings on the DWA-582 match the settings on your
access point/router. Please check and conrm your settings for.
• Wireless Network Name (SSID)
• Wireless Encryption Key/Wi-Fi Password
• Wireless Security Method (e.g., WEP, WPA2)
To check whether a wireless connection has been made, in theWindows system
tray (bottom right corner), red means no valid connections have been made.
• Check that your Internet is working ne on existing computers.
• Ensure that you have followed and completed the software installation
process, otherwise, please re-install the software.The LED on the DWA-582
should come on after software installation.
Troubleshooting
5
Notes
6
Notes
7
This guide is only for the rst time conguration. Refer to the user manual to
learn more. We also oer FAQs, videos, live chat, email support, and telephone
support on our website.
Version 1.0 (NA)_130x183
August 7, 2014
6DWA582CA.01G
©2014 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link. All other
third-party marks mentioned herein may be trademarks of their respective owners. Maximum wireless signal rate derived
from IEEE Standard 802.11ac, 902.11a, 802.11g, and 802.11n specications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network trac, building materials and construction, and
network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.
Product specications, size and shape are subject to change without notice, and actual product appearance may dier
from that depicted on the packaging. This publication may not be reproduced, in whole or in part, without prior express
written permission from D-Link Systems, Inc. Visit www.dlink.com for details.
http://support.dlink.com
http://support.dlink.ca
USA
Canada
Technical Support
8
DWA-582
Guide d’installation rapide
Point d'accès double bande
Adaptateur double bande PCI Express
Contactez votre revendeur s'il manque l'un des éléments ci-dessus.
• Port PCIe disponible
• Windows® 8.1, 8 ou 7
• Réseau sans l 802.11ac ou 802.11n
• 20 MB de disque dur
• Lecteur CD-ROM
Contenu de la boîte
Conguration système requise
Avant d’installer le nouvel adaptateur sans l D-Link, vériez les points suivants:
• Désinstallez tous les adaptateurs sans l déjà installés.
• Désactivez tous les adaptateurs sans l et/ou Ethernet intégrés.
• Vériez les paramètres tels que le SSID (nom du réseau sans l) et les
paramètres de sécurité du ou des réseaux auxquels vous voulez vous
connecter.
• Vous pouvez télécharger le tout dernier pilote au http://support.dlink.com/
DWA-582 (États-Unis) ou http://support.dlink.ca/DWA-582 (Canada).
Avant de commencer
Adaptateur double bande PCI Express sans l AC1200 DWA-582
Deux antennes
Support de xation extra-plat
CD avec les pilotes et le manuel
2
Other manuals for DWA-582
6
Table of contents
Languages:
Other D-Link Adapter manuals
D-Link
D-Link DHP-700AV User manual
D-Link
D-Link DWL-122 Operator's manual
D-Link
D-Link DWL-G520M User manual
D-Link
D-Link DWA-127 User manual
D-Link
D-Link DWA-121 User manual
D-Link
D-Link DWL-G820 - AirPlus Xtreme G User manual
D-Link
D-Link DWA-142 User manual
D-Link
D-Link DVG-2001S User manual
D-Link
D-Link DWA-520 User manual
D-Link
D-Link AirPlus DWL-810 User manual
D-Link
D-Link AirPlus G DWL-G122 User manual
D-Link
D-Link Air DWL-122 User manual
D-Link
D-Link AirPremier AG DWL-AG660 User manual
D-Link
D-Link DWL-G550 User manual
D-Link
D-Link DWA-162 User manual
D-Link
D-Link PersonalAir DBT-120 Dimensions
D-Link
D-Link PowerLine DHP-500AV User manual
D-Link
D-Link WA171B1 User manual
D-Link
D-Link DWM-221 User manual
D-Link
D-Link DUB-2332 User manual
